[Wed Aug 15 07:35:25 2012] Detection parameters:
  Position = (270.7, 269.4) = 19 7 36.16 7 6 21.8
  Extent = 21.7" x 21.7", rotation angle = 0 degrees
  Source counts = 119.1 +/- 22.3
  Background counts = 232.6
  Rate = 0.007 +/- 0.001

[Wed Aug 15 07:35:25 2012] Off-axis axis estimate = 2.91'
[Wed Aug 15 08:18:29 2012] Using EEF radius (= 7.88 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 08:18:29 2012] Initial guess for spatial extent in simple fitting = 7.88"
[Wed Aug 15 08:18:29 2012] source mask rpix=1.8, npix_max = 21, mask sum = 18, frac = 0.841
[Wed Aug 15 08:18:29 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 7.88"
[Wed Aug 15 09:16:10 2012] fullrun_mos1_xmm0085200401_pi300-10000_cl_pass0_src17.ximg exists
[Wed Aug 15 09:16:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085200401_pi300-10000_cl_pass0_src17.csv
[Wed Aug 15 09:16:10 2012] fullrun_mos1_xmm0085200401_pi300-10000_cl_pass0_src17_1.ximg exists
[Wed Aug 15 09:16:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085200401_pi300-10000_cl_pass0_src17.csv
[Wed Aug 15 09:16:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085200401_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085200401_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 09:16:10 2012] fullrun_mos1_xmm0085200401_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Wed Aug 15 09:16:10 2012] fullrun_mos1_xmm0085200401_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Wed Aug 15 09:16:10 2012] Fit fullrun_mos1_xmm0085200401_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Wed Aug 15 10:01:45 2012] Source 17 is offset by 3.050202 and -7.881432 pixels which is larger than
2 X fitted extent = 7.250115 x 7.250115, not incorporating fit results
[Wed Aug 15 10:01:45 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 10:01:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 10:01:45 2012] Assessing source extent using major
[Wed Aug 15 10:01:45 2012] Source does appear to be extended
[Wed Aug 15 10:01:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 10:01:45 2012] Source is confused with source 11
[Wed Aug 15 11:10:19 2012] Using EEF radius (= 7.88 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 11:10:19 2012] Initial guess for spatial extent in simple fitting = 7.88"
[Wed Aug 15 11:10:19 2012] source mask rpix=1.8, npix_max = 21, mask sum = 18, frac = 0.841
[Wed Aug 15 11:10:19 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 7.88"
[Wed Aug 15 12:47:12 2012] fullrun_mos1_xmm0085200401_pi300-10000_cl_pass1_src17.ximg exists
[Wed Aug 15 12:47:12 2012] fullrun_mos1_xmm0085200401_pi300-10000_cl_pass1_src17_1.ximg exists
[Wed Aug 15 12:47:12 2012] Fit fullrun_mos1_xmm0085200401_pi300-10000_cl_pass1_src17 appears to have run properly
[Wed Aug 15 12:47:12 2012] fullrun_mos1_xmm0085200401_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Wed Aug 15 12:47:12 2012] fullrun_mos1_xmm0085200401_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Wed Aug 15 12:47:12 2012] Fit fullrun_mos1_xmm0085200401_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Wed Aug 15 13:53:44 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 11.970058 pixels away
[Wed Aug 15 13:53:44 2012] Warning, spatial fit 17 centroid is now closest to src. 11
[Wed Aug 15 13:53:44 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 13:53:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 13:53:44 2012] Assessing source extent using major
[Wed Aug 15 13:53:44 2012] Source does appear to be extended
[Wed Aug 15 13:53:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 05:32:01 2012] XMMSAS src. selection expression = ellipse(23504.251617, 23386.575409, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Aug 16 05:32:01 2012] Writing source region out to fullrun_mos1_xmm0085200401_pi300-10000_pass1_cl_src17_src.reg
[Thu Aug 16 05:32:01 2012] Extracting stamp from image fullrun_mos1_xmm0085200401_pi300-10000_cl_sm2.00.img.gz, (196, 194) - (346, 344)
[Thu Aug 16 05:32:01 2012] XMMSAS bgd. selection expression = annulus(23504.251617, 23386.575409, 2175.000000, 4350.000000, X, Y) && !ellipse(23726.757600, 25824.019200, 1072.320031, 1072.320031, 0.000000, X, Y) && !ellipse(26001.731400, 26141.730400, 1043.728030, 828.832024, 58.194900, X, Y) && !ellipse(25467.438000, 26307.350000, 1085.904031, 1085.904031, 0.000000, X, Y) && !ellipse(26045.043528, 25853.017355, 1872.560054, 1158.453113, 61.123245, X, Y) && !ellipse(22831.962718, 26571.974400, 748.158422, 748.158422, 0.000000, X, Y) && !ellipse(25035.324400, 24722.664000, 1670.448048, 1093.880031, 128.509000, X, Y) && !ellipse(23195.952000, 24068.920000, 1261.520036, 1041.192030, 359.941830, X, Y) && !ellipse(22442.612000, 25652.766000, 1277.296037, 1277.296037, 0.000000, X, Y) && !ellipse(22391.780000, 25325.338000, 1236.216036, 793.632823, 330.118200, X, Y) && !ellipse(21499.472000, 24881.506000, 1871.504054, 1871.504054, 0.000000, X, Y) && !ellipse(24936.573547, 25879.783325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23754.651400, 25376.134000, 1195.448034, 1195.448034, 0.000000, X, Y) && !ellipse(25273.253140, 27736.624400, 884.808025, 884.808025, 0.000000, X, Y) && !ellipse(23554.616000, 26764.628000, 1171.760034, 646.861619, 315.396629, X, Y)
[Thu Aug 16 05:32:01 2012] Writing fullrun_mos1_xmm0085200401_pi300-10000_pass1_cl_src17.gif
[Thu Aug 16 06:06:40 2012] Mean detx,y = (1127.34, 485.89) 
[Thu Aug 16 06:06:41 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 16 06:06:55 2012] Binned source spectrum to 10 counts/bin
[Thu Aug 16 06:06:55 2012] Setting source spectrum file to fullrun_mos1_xmm0085200401_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu Aug 16 06:06:55 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0085200401_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Thu Aug 16 08:36:04 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Aug 16 08:36:04 2012] rmf not generated due to insufficient counts
[Thu Aug 16 11:27:58 2012] Updating aperture counts using extracted products
[Thu Aug 16 11:27:58 2012] Error reading totcts from fullrun_mos1_xmm0085200401_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Thu Aug 16 11:27:58 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 11:27:58 2012] Using photon index=1.80, rate=0.00691, arf fullrun_mos1_xmm0085200401_pi300-10000_pass1_cl_src17.arf
[Thu Aug 16 11:27:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 11:27:58 2012] Updating source flux to 6.4e-14
[Thu Aug 16 11:28:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting