[Sat Jul 14 12:17:21 2012] Detection parameters:
  Position = (311.0, 320.0) = 19 7 35.58 7 8 27.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4090.9 +/- 78.8
  Background counts = 107.0
  Rate = 0.3 +/- 0.006

[Sat Jul 14 12:17:22 2012] Off-axis axis estimate = 1.81'
[Sat Jul 14 12:20:25 2012] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 12:20:25 2012] Initial guess for spatial extent in simple fitting = 7.33"
[Sat Jul 14 12:20:25 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.837
[Sat Jul 14 12:20:25 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.33"
[Sat Jul 14 13:37:21 2012] fullrun_pn_xmm0085200301_pi300-10000_cl_pass0_src2.ximg exists
[Sat Jul 14 13:37:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085200301_pi300-10000_cl_pass0_src2.csv
[Sat Jul 14 13:37:21 2012] fullrun_pn_xmm0085200301_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Jul 14 13:37:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085200301_pi300-10000_cl_pass0_src2.csv
[Sat Jul 14 13:37:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085200301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085200301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 13:37:22 2012] fullrun_pn_xmm0085200301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Jul 14 13:37:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085200301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Jul 14 13:37:22 2012] fullrun_pn_xmm0085200301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Jul 14 13:37:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085200301_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sat Jul 14 13:37:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085200301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085200301_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 17:01:44 2012] Spatial fit model total counts = 11427.100000, observed total counts = 9994.000000
[Sat Jul 14 17:01:44 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jul 14 17:01:44 2012] Source 2 is offset by -5.024052 and 6.625731 pixels which is larger than
2 X fitted extent = 2.274681 x 2.274681, not incorporating fit results
[Sat Jul 14 17:01:44 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 17:01:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 17:01:44 2012] Assessing source extent using major
[Sat Jul 14 17:01:44 2012] Source does appear to be extended
[Sat Jul 14 17:01:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 17:01:58 2012] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 17:01:58 2012] Initial guess for spatial extent in simple fitting = 7.33"
[Sat Jul 14 17:01:58 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.837
[Sat Jul 14 17:01:58 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 7.33"
[Sat Jul 14 18:34:28 2012] fullrun_pn_xmm0085200301_pi300-10000_cl_pass1_src2.ximg exists
[Sat Jul 14 18:34:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085200301_pi300-10000_cl_pass1_src2.csv
[Sat Jul 14 18:34:28 2012] fullrun_pn_xmm0085200301_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Jul 14 18:34:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085200301_pi300-10000_cl_pass1_src2.csv
[Sat Jul 14 18:34:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085200301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085200301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 18:34:28 2012] fullrun_pn_xmm0085200301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Jul 14 18:34:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085200301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Jul 14 18:34:28 2012] fullrun_pn_xmm0085200301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Jul 14 18:34:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085200301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Jul 14 18:34:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085200301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085200301_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 20:52:22 2012] Spatial fit model total counts = 11955.900000, observed total counts = 9994.000000
[Sat Jul 14 20:52:22 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jul 14 20:52:22 2012] Source 2 is offset by -0.647316 and 1.969639 pixels which is larger than
2 X fitted extent = 1.568147 x 1.568147, not incorporating fit results
[Sat Jul 14 20:52:22 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 20:52:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 20:52:22 2012] Assessing source extent using major
[Sat Jul 14 20:52:22 2012] Source does appear to be extended
[Sat Jul 14 20:52:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 20:52:36 2012] Counts = 4090.946289, rescaling region sizes by 2.000000
[Sat Jul 14 20:52:36 2012] XMMSAS src. selection expression = ellipse(27006.787506, 27792.734589, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Jul 14 20:52:36 2012] Writing source region out to fullrun_pn_xmm0085200301_pi300-10000_pass1_cl_src2_src.reg
[Sat Jul 14 20:52:36 2012] Extracting stamp from image fullrun_pn_xmm0085200301_pi300-10000_cl_sm2.00.img.gz, (236, 245) - (386, 395)
[Sat Jul 14 20:52:36 2012] XMMSAS bgd. selection expression = annulus(27006.787506, 27792.734589, 4350.000000, 8700.000000, X, Y) && !ellipse(29290.996826, 27572.303436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28072.678223, 27747.362793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28421.506592, 27271.053192, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25878.872650, 27527.606018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26439.177800, 26503.864000, 1091.432031, 1091.432031, 0.000000, X, Y) && !ellipse(28835.672577, 28531.207092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27685.253693, 29085.208160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26235.084656, 28875.925476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26789.677795, 28810.141815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25693.291412, 28093.326385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24592.975586, 27125.573517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28594.978241, 29613.702362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28200.204000, 28446.536200, 1270.592037, 1270.592037, 0.000000, X, Y) && !ellipse(28259.528000, 24771.172000, 1168.656034, 1168.656034, 0.000000, X, Y)
[Sat Jul 14 20:52:36 2012] Writing fullrun_pn_xmm0085200301_pi300-10000_pass1_cl_src2.gif
[Sat Jul 14 20:55:47 2012] Mean detx,y = (-332.06, -428.83) 
[Sat Jul 14 20:55:50 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 20:58:24 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 20:58:24 2012] Setting source spectrum file to fullrun_pn_xmm0085200301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jul 14 20:58:24 2012] Setting bgd. spectrum file to fullrun_pn_xmm0085200301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jul 14 22:21:35 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul 14 22:21:35 2012] rmf not generated due to insufficient counts
[Sun Jul 15 07:41:20 2012] Updating aperture counts using extracted products
[Sun Jul 15 07:41:20 2012] Error reading totcts from fullrun_pn_xmm0085200301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jul 15 07:41:21 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 07:41:21 2012] Using photon index=1.80, rate=0.317, arf fullrun_pn_xmm0085200301_pi300-10000_pass1_cl_src2.arf
[Sun Jul 15 07:41:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 07:41:21 2012] Updating source flux to 7.2e-13
[Sun Jul 15 07:46:34 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jul 15 07:47:51 2012] xmm0085200301/analysis//spectral/fullrun_pn_xmm0085200301_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete