[Sat Jul 14 12:17:55 2012] Detection parameters:
  Position = (332.2, 322.0) = 19 7 29.38 7 8 35.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1906.7 +/- 54.5
  Background counts = 46.2
  Rate = 0.1 +/- 0.003

[Sat Jul 14 12:17:56 2012] Off-axis axis estimate = 2.99'
[Sat Jul 14 13:37:22 2012] Using EEF radius (= 7.92 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 13:37:22 2012] Initial guess for spatial extent in simple fitting = 7.92"
[Sat Jul 14 13:37:22 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.928
[Sat Jul 14 13:37:22 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.92"
[Sat Jul 14 15:43:47 2012] fullrun_mos1_xmm0085200301_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jul 14 15:43:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085200301_pi300-10000_cl_pass0_src1.csv
[Sat Jul 14 15:43:47 2012] fullrun_mos1_xmm0085200301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jul 14 15:43:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085200301_pi300-10000_cl_pass0_src1.csv
[Sat Jul 14 15:43:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085200301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085200301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 15:43:47 2012] fullrun_mos1_xmm0085200301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jul 14 15:43:47 2012] fullrun_mos1_xmm0085200301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jul 14 15:43:47 2012] Fit fullrun_mos1_xmm0085200301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jul 14 17:01:48 2012] Warning, spatial fit 1 centroid is now closest to src. 14
[Sat Jul 14 17:01:48 2012] Spatial fit model total counts = 5508.110000, observed total counts = 5497.000000
[Sat Jul 14 17:01:48 2012] Offset between fit and detection position for source 2 = 1.992374 pixels
[Sat Jul 14 17:01:48 2012] Warning, changing simple spatial fit ID from 1 to 9
[Sat Jul 14 17:01:48 2012] 5585.109000 total counts/ 4864.380000 bgd. counts: snr = 10.333757
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.992374 pixels
  Position = (333.5, 320.5) = 19 7 29.01 7 8 29.0
  Extent = 15.3 (15.2-30.5)", rotation angle = 0
  Source counts = 720.7 +/- 74.7
  Background counts = 4864.4
  Rate = 0.05 +/- 0.005
[Sat Jul 14 17:01:48 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 17:01:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 17:01:48 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 17:01:48 2012] Source does appear to be extended
[Sat Jul 14 17:01:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 17:01:48 2012] Source is confused with source 4
[Sat Jul 14 17:01:48 2012] Source is confused with source 3
[Sat Jul 14 17:01:48 2012] Source is confused with source 7
[Sat Jul 14 17:01:48 2012] Source is confused with source 18
[Sat Jul 14 18:34:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 14 18:34:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 14 18:34:28 2012] Initial guess for spatial extent in simple fitting = 15.27"
[Sat Jul 14 18:34:28 2012] source mask rpix=3.5, npix_max = 64, mask sum = 64, frac = 0.995
[Sat Jul 14 18:34:28 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 15.27"
[Sat Jul 14 19:46:16 2012] fullrun_mos1_xmm0085200301_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jul 14 19:46:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085200301_pi300-10000_cl_pass1_src1.csv
[Sat Jul 14 19:46:16 2012] fullrun_mos1_xmm0085200301_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jul 14 19:46:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085200301_pi300-10000_cl_pass1_src1.csv
[Sat Jul 14 19:46:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085200301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085200301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 19:46:16 2012] fullrun_mos1_xmm0085200301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jul 14 19:46:16 2012] fullrun_mos1_xmm0085200301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jul 14 19:46:16 2012] Fit fullrun_mos1_xmm0085200301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jul 14 20:52:26 2012] Spatial fit model total counts = 15106.500000, observed total counts = 15147.000000
[Sat Jul 14 20:52:26 2012] Offset between fit and detection position for source 2 = 0.624133 pixels
[Sat Jul 14 20:52:26 2012] 11981.720000 total counts/ 5077.850000 bgd. counts: snr = 96.884136
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.624133 pixels
  Position = (333.7, 321.1) = 19 7 28.95 7 8 31.6
  Extent = 30.5 (30.4-30.5)", rotation angle = 0
  Source counts = 6903.9 +/- 109.5
  Background counts = 5077.9
  Rate = 0.4 +/- 0.007
[Sat Jul 14 20:52:26 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 20:52:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 20:52:26 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 20:52:26 2012] Source does appear to be extended
[Sat Jul 14 20:52:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 15 01:31:16 2012] Counts = 6903.870000, rescaling region sizes by 2.000000
[Sun Jul 15 01:31:16 2012] XMMSAS src. selection expression = ellipse(28981.159400, 27888.010040, 3659.256105, 3659.256105, 0.000000, X, Y)
[Sun Jul 15 01:31:16 2012] Writing source region out to fullrun_mos1_xmm0085200301_pi300-10000_pass1_cl_src2_src.reg
[Sun Jul 15 01:31:16 2012] Extracting stamp from image fullrun_mos1_xmm0085200301_pi300-10000_cl_sm2.00.img.gz, (123, 111) - (544, 531)
[Sun Jul 15 01:31:16 2012] XMMSAS bgd. selection expression = annulus(28981.159400, 27888.010040, 12197.520351, 24395.040702, X, Y) && !ellipse(26985.805400, 27856.059200, 1013.376029, 1013.376029, 0.000000, X, Y) && !ellipse(29232.144000, 28111.504000, 1117.592032, 1117.592032, 0.000000, X, Y) && !ellipse(29322.677112, 27714.947369, 1278.104037, 1041.737714, 73.641294, X, Y) && !ellipse(28734.927490, 29043.755188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26113.073000, 28621.836600, 763.836822, 763.836822, 0.000000, X, Y) && !ellipse(26047.705963, 27528.062683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26739.176483, 26840.314514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28621.688000, 27181.876000, 1204.920035, 1204.920035, 0.000000, X, Y) && !ellipse(26498.786000, 26595.122000, 1111.136032, 1111.136032, 0.000000, X, Y) && !ellipse(25539.838000, 27360.818000, 1136.440033, 1136.440033, 0.000000, X, Y) && !ellipse(24818.926200, 27027.169600, 1142.504033, 1142.504033, 0.000000, X, Y) && !ellipse(28495.216000, 29478.484000, 1309.328038, 1309.328038, 0.000000, X, Y) && !ellipse(28073.195953, 28617.527405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29434.862244, 28579.693237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27450.995148, 29212.623016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15507.580826, 18150.452744, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35723.936340, 41722.279419, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul 15 01:31:16 2012] Writing fullrun_mos1_xmm0085200301_pi300-10000_pass1_cl_src2.gif
[Sun Jul 15 01:31:22 2012] Mean detx,y = (768.66, 305.74) 
[Sun Jul 15 01:31:24 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 15 01:41:44 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 15 01:41:44 2012] Setting source spectrum file to fullrun_mos1_xmm0085200301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jul 15 01:41:44 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0085200301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Jul 15 07:41:21 2012] Updating aperture counts using extracted products
[Sun Jul 15 07:41:21 2012] Error reading totcts from fullrun_mos1_xmm0085200301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Jul 15 07:41:21 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 07:41:21 2012] Using photon index=1.80, rate=0.431, arf fullrun_mos1_xmm0085200301_pi300-10000_pass1_cl_src2.arf
[Sun Jul 15 07:41:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 07:41:21 2012] Updating source flux to 3.6e-12
[Sun Jul 15 07:41:23 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Sun Jul 15 07:44:33 2012] Reading fit data from xmm0085200301/analysis//spectral/fullrun_mos1_xmm0085200301_pi300-10000_pass1_cl_src2_pl.csv
[Sun Jul 15 07:44:33 2012] Spectral fit parameter nH value = 2.24602e+22
[Sun Jul 15 07:44:33 2012] Spectral fit parameter PhoIndex value = 5.46794
[Sun Jul 15 07:44:33 2012] Failed to get F(0.3-8.0) from xmm0085200301/analysis//spectral/fullrun_mos1_xmm0085200301_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sun Jul 15 07:44:33 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 15 07:44:33 2012] Using Nh = 2.2e+22, photon index=5.47, rate=0.431, arf fullrun_mos1_xmm0085200301_pi300-10000_pass1_cl_src2.arf
[Sun Jul 15 07:44:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 15 07:44:33 2012] Updating source flux to 2.9e-12