[Mon Jul  9 23:48:09 2012] Detection parameters:
  Position = (315.4, 313.0) = 19 11 16.01 0 35 7.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 794.6 +/- 35.6
  Background counts = 3.7
  Rate = 0.1 +/- 0.006

[Mon Jul  9 23:48:09 2012] Off-axis axis estimate = 1.62'
[Mon Jul  9 23:57:17 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Mon Jul  9 23:57:17 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Mon Jul  9 23:57:17 2012] source mask rpix=1.7, npix_max = 18, mask sum = 18, frac = 0.961
[Mon Jul  9 23:57:17 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Mon Jul  9 23:59:40 2012] fullrun_mos1_xmm0085180401_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jul  9 23:59:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085180401_pi300-10000_cl_pass0_src1.csv
[Mon Jul  9 23:59:40 2012] fullrun_mos1_xmm0085180401_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jul  9 23:59:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085180401_pi300-10000_cl_pass0_src1.csv
[Mon Jul  9 23:59:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085180401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085180401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 23:59:40 2012] fullrun_mos1_xmm0085180401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jul  9 23:59:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085180401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jul  9 23:59:40 2012] fullrun_mos1_xmm0085180401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jul  9 23:59:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085180401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jul  9 23:59:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085180401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085180401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 00:01:49 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.804596 pixels away
[Tue Jul 10 00:01:49 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 00:01:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 00:01:49 2012] Assessing source extent using major
[Tue Jul 10 00:01:49 2012] Source does appear to be extended
[Tue Jul 10 00:01:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 00:08:22 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Tue Jul 10 00:08:22 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Tue Jul 10 00:08:22 2012] source mask rpix=1.7, npix_max = 18, mask sum = 18, frac = 0.961
[Tue Jul 10 00:08:22 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.24"
[Tue Jul 10 00:11:26 2012] fullrun_mos1_xmm0085180401_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jul 10 00:11:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085180401_pi300-10000_cl_pass1_src1.csv
[Tue Jul 10 00:11:26 2012] fullrun_mos1_xmm0085180401_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jul 10 00:11:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085180401_pi300-10000_cl_pass1_src1.csv
[Tue Jul 10 00:11:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085180401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085180401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 00:11:26 2012] fullrun_mos1_xmm0085180401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jul 10 00:11:26 2012] fullrun_mos1_xmm0085180401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jul 10 00:11:26 2012] Fit fullrun_mos1_xmm0085180401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jul 10 00:13:54 2012] Spatial fit model total counts = 657.106000, observed total counts = 675.000000
[Tue Jul 10 00:13:54 2012] Offset between fit and detection position for source 1 = 0.965502 pixels
[Tue Jul 10 00:13:54 2012] 659.826000 total counts/ 174.917000 bgd. counts: snr = 36.664371
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.965502 pixels
  Position = (315.1, 314.0) = 19 11 16.07 0 35 5.6
  Extent = 4.9 (4.4-5.3)", rotation angle = 0
  Source counts = 484.9 +/- 25.7
  Background counts = 174.9
  Rate = 0.07 +/- 0.004
[Tue Jul 10 00:13:54 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 00:13:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 00:13:54 2012] Assessing source extent using major axis lower bound
[Tue Jul 10 00:13:54 2012] Source does appear to be extended
[Tue Jul 10 00:13:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 00:21:10 2012] XMMSAS src. selection expression = ellipse(27369.054000, 27267.042360, 291.722408, 291.722408, 0.000000, X, Y)
[Tue Jul 10 00:21:10 2012] Writing source region out to fullrun_mos1_xmm0085180401_pi300-10000_pass1_cl_src1_src.reg
[Tue Jul 10 00:21:10 2012] Extracting stamp from image fullrun_mos1_xmm0085180401_pi300-10000_cl_sm2.00.img.gz, (298, 297) - (332, 331)
[Tue Jul 10 00:21:10 2012] XMMSAS bgd. selection expression = annulus(27369.054000, 27267.042360, 486.204014, 972.408028, X, Y)
[Tue Jul 10 00:21:10 2012] Writing fullrun_mos1_xmm0085180401_pi300-10000_pass1_cl_src1.gif
[Tue Jul 10 00:21:11 2012] Mean detx,y = (267.06, -291.57) 
[Tue Jul 10 00:21:12 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 10 00:21:17 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 10 00:21:17 2012] Setting source spectrum file to fullrun_mos1_xmm0085180401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jul 10 00:21:17 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0085180401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jul 10 00:25:38 2012] Updating aperture counts using extracted products
[Tue Jul 10 00:25:38 2012] Error reading totcts from fullrun_mos1_xmm0085180401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jul 10 00:25:38 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 10 00:25:38 2012] Using photon index=1.80, rate=0.0665, arf fullrun_mos1_xmm0085180401_pi300-10000_pass1_cl_src1.arf
[Tue Jul 10 00:25:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 10 00:25:38 2012] Updating source flux to 8.7e-13
[Tue Jul 10 00:25:46 2012] Reading fit data from xmm0085180401/analysis//spectral/fullrun_mos1_xmm0085180401_pi300-10000_pass1_cl_src1_pl.csv
[Tue Jul 10 00:25:46 2012] Spectral fit parameter nH value = 6.43793e+21
[Tue Jul 10 00:25:46 2012] Spectral fit parameter PhoIndex value = 3.89583
[Tue Jul 10 00:25:46 2012] Failed to get F(0.3-8.0) from xmm0085180401/analysis//spectral/fullrun_mos1_xmm0085180401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jul 10 00:25:46 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 10 00:25:46 2012] Using Nh = 6.4e+21, photon index=3.90, rate=0.0665, arf fullrun_mos1_xmm0085180401_pi300-10000_pass1_cl_src1.arf
[Tue Jul 10 00:25:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 10 00:25:46 2012] Updating source flux to 6.5e-13