[Sat Jun 29 13:41:02 2013] Detection parameters:
  Position = (246.4, 310.1) = 10 11 37.48 55 47 24.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 483.6 +/- 28.1
  Background counts = 45.5
  Rate = 0.02 +/- 0.001

[Sat Jun 29 13:41:03 2013] Off-axis axis estimate = 3.86'
[Sat Jun 29 13:42:56 2013] Using EEF radius (= 8.36 ")to estimate initial spatial extent for simple fitting
[Sat Jun 29 13:42:56 2013] Initial guess for spatial extent in simple fitting = 8.36"
[Sat Jun 29 13:42:56 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.853
[Sat Jun 29 13:42:56 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 8.36"
[Sat Jun 29 14:29:47 2013] fullrun_pn_xmm0085170101_pi300-10000_cl_pass0_src4.ximg exists
[Sat Jun 29 14:29:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085170101_pi300-10000_cl_pass0_src4.csv
[Sat Jun 29 14:29:47 2013] fullrun_pn_xmm0085170101_pi300-10000_cl_pass0_src4_1.ximg exists
[Sat Jun 29 14:29:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085170101_pi300-10000_cl_pass0_src4.csv
[Sat Jun 29 14:29:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085170101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085170101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 14:29:47 2013] fullrun_pn_xmm0085170101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sat Jun 29 14:29:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085170101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat Jun 29 14:29:47 2013] fullrun_pn_xmm0085170101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sat Jun 29 14:29:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085170101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat Jun 29 14:29:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085170101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085170101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 15:32:07 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 11.860530 pixels away
[Sat Jun 29 15:32:07 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 15:32:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 15:32:07 2013] Assessing source extent using major
[Sat Jun 29 15:32:07 2013] Source does appear to be extended
[Sat Jun 29 15:32:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 15:32:30 2013] Using EEF radius (= 8.36 ")to estimate initial spatial extent for simple fitting
[Sat Jun 29 15:32:30 2013] Initial guess for spatial extent in simple fitting = 8.36"
[Sat Jun 29 15:32:30 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.853
[Sat Jun 29 15:32:30 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 8.36"
[Sat Jun 29 16:20:28 2013] fullrun_pn_xmm0085170101_pi300-10000_cl_pass1_src4.ximg exists
[Sat Jun 29 16:20:28 2013] fullrun_pn_xmm0085170101_pi300-10000_cl_pass1_src4_1.ximg exists
[Sat Jun 29 16:20:28 2013] Fit fullrun_pn_xmm0085170101_pi300-10000_cl_pass1_src4 appears to have run properly
[Sat Jun 29 16:20:29 2013] fullrun_pn_xmm0085170101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sat Jun 29 16:20:29 2013] fullrun_pn_xmm0085170101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sat Jun 29 16:20:29 2013] Fit fullrun_pn_xmm0085170101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sat Jun 29 17:22:36 2013] Spatial fit model total counts = 648.263000, observed total counts = 593.000000
[Sat Jun 29 17:22:36 2013] Offset between fit and detection position for source 4 = 0.142923 pixels
[Sat Jun 29 17:22:36 2013] 652.081000 total counts/ 330.141000 bgd. counts: snr = 17.718429
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.142923 pixels
  Position = (246.3, 310.1) = 10 11 37.56 55 47 23.4
  Extent = 5.4 (4.7-5.9)", rotation angle = 0
  Source counts = 321.9 +/- 25.5
  Background counts = 330.1
  Rate = 0.01 +/- 0.0009
[Sat Jun 29 17:22:36 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 17:22:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 17:22:36 2013] Assessing source extent using major axis lower bound
[Sat Jun 29 17:22:36 2013] Source does appear to be extended
[Sat Jun 29 17:22:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 17:22:54 2013] XMMSAS src. selection expression = ellipse(21380.006600, 26927.510400, 321.532209, 321.532209, 0.000000, X, Y)
[Sat Jun 29 17:22:54 2013] Writing source region out to fullrun_pn_xmm0085170101_pi300-10000_pass1_cl_src4_src.reg
[Sat Jun 29 17:22:54 2013] Extracting stamp from image fullrun_pn_xmm0085170101_pi300-10000_cl_sm2.00.img.gz, (228, 292) - (265, 329)
[Sat Jun 29 17:22:54 2013] XMMSAS bgd. selection expression = annulus(21380.006600, 26927.510400, 535.887015, 1071.774031, X, Y) && !ellipse(22179.478800, 25969.441600, 399.284011, 399.284011, 0.000000, X, Y)
[Sat Jun 29 17:22:54 2013] Writing fullrun_pn_xmm0085170101_pi300-10000_pass1_cl_src4.gif
[Sat Jun 29 17:25:10 2013] Mean detx,y = (2663.53, 4254.19) 
[Sat Jun 29 17:25:13 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 29 17:25:26 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 29 17:25:26 2013] Setting source spectrum file to fullrun_pn_xmm0085170101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Jun 29 17:25:26 2013] Setting bgd. spectrum file to fullrun_pn_xmm0085170101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat Jun 29 18:44:34 2013] Updating aperture counts using extracted products
[Sat Jun 29 18:44:34 2013] Total counts from fullrun_pn_xmm0085170101_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 376.00
[Sat Jun 29 18:44:34 2013] Total counts from fullrun_pn_xmm0085170101_pi300-10000_pass1_cl_src4_bgd.pi.gz = 292.00
[Sat Jun 29 18:44:34 2013] Got source and background scale factors 323200.000000, 2024988.000000
[Sat Jun 29 18:44:34 2013] User source parameters:
  Position = (246.3, 310.1) = 10 11 37.56 55 47 23.4
  Extent = 5.4 (4.7-5.9)", rotation angle = 0
  Source aperture counts = 329.4 +/- 20.4
  Background aperture counts = 46.6
  Rate = 0.01 +/- 0.0007

[Sat Jun 29 18:44:43 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 29 18:44:43 2013] Using photon index=1.80, rate=0.0116, arf fullrun_pn_xmm0085170101_pi300-10000_pass1_cl_src4.arf
[Sat Jun 29 18:44:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 29 18:44:43 2013] Updating source flux to 4.3e-14
[Sat Jun 29 18:45:03 2013] xmm0085170101/analysis//spectral/fullrun_pn_xmm0085170101_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete