[Sat Jun 29 13:41:03 2013] Detection parameters:
  Position = (258.7, 241.1) = 10 11 31.11 55 42 22.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.2 +/- 13.9
  Background counts = 44.9
  Rate = 0.003 +/- 0.0006

[Sat Jun 29 13:41:03 2013] Off-axis axis estimate = 5.06'
[Sat Jun 29 13:42:56 2013] Using EEF radius (= 8.96 ")to estimate initial spatial extent for simple fitting
[Sat Jun 29 13:42:56 2013] Initial guess for spatial extent in simple fitting = 8.96"
[Sat Jun 29 13:42:56 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.954
[Sat Jun 29 13:42:56 2013] Giving source the simple spatial ID 38 for pass 0, mean size = 8.96"
[Sat Jun 29 14:29:47 2013] fullrun_pn_xmm0085170101_pi300-10000_cl_pass0_src38.ximg exists
[Sat Jun 29 14:29:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085170101_pi300-10000_cl_pass0_src38.csv
[Sat Jun 29 14:29:47 2013] fullrun_pn_xmm0085170101_pi300-10000_cl_pass0_src38_1.ximg exists
[Sat Jun 29 14:29:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085170101_pi300-10000_cl_pass0_src38.csv
[Sat Jun 29 14:29:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085170101_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085170101_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 14:29:48 2013] fullrun_pn_xmm0085170101_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Sat Jun 29 14:29:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085170101_pi300-10000_cl_pass0_tfrozen_src38.csv
[Sat Jun 29 14:29:48 2013] fullrun_pn_xmm0085170101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Sat Jun 29 14:29:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085170101_pi300-10000_cl_pass0_tfrozen_src38.csv
[Sat Jun 29 14:29:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085170101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085170101_pi300-10000_cl_pass0_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 15:32:07 2013] Spatial fit model total counts = 342.316000, observed total counts = 302.000000
[Sat Jun 29 15:32:07 2013] Poor agreement between spatial fit and data for source 38
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 29 15:32:07 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 15:32:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 15:32:07 2013] Assessing source extent using major
[Sat Jun 29 15:32:07 2013] Source does appear to be extended
[Sat Jun 29 15:32:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 15:32:30 2013] Using EEF radius (= 8.96 ")to estimate initial spatial extent for simple fitting
[Sat Jun 29 15:32:30 2013] Initial guess for spatial extent in simple fitting = 8.96"
[Sat Jun 29 15:32:30 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.954
[Sat Jun 29 15:32:30 2013] Giving source the simple spatial ID 37 for pass 1, mean size = 8.96"
[Sat Jun 29 16:20:28 2013] fullrun_pn_xmm0085170101_pi300-10000_cl_pass1_src37.ximg exists
[Sat Jun 29 16:20:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085170101_pi300-10000_cl_pass1_src37.csv
[Sat Jun 29 16:20:28 2013] fullrun_pn_xmm0085170101_pi300-10000_cl_pass1_src37_1.ximg exists
[Sat Jun 29 16:20:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085170101_pi300-10000_cl_pass1_src37.csv
[Sat Jun 29 16:20:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085170101_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085170101_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 16:20:29 2013] fullrun_pn_xmm0085170101_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Sat Jun 29 16:20:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085170101_pi300-10000_cl_pass1_tfrozen_src37.csv
[Sat Jun 29 16:20:29 2013] fullrun_pn_xmm0085170101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Sat Jun 29 16:20:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085170101_pi300-10000_cl_pass1_tfrozen_src37.csv
[Sat Jun 29 16:20:29 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085170101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085170101_pi300-10000_cl_pass1_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 17:22:36 2013] Spatial fit model total counts = 342.326000, observed total counts = 302.000000
[Sat Jun 29 17:22:36 2013] Poor agreement between spatial fit and data for source 38
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 29 17:22:36 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 17:22:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 17:22:36 2013] Assessing source extent using major
[Sat Jun 29 17:22:36 2013] Source does appear to be extended
[Sat Jun 29 17:22:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 17:22:54 2013] XMMSAS src. selection expression = ellipse(22460.010010, 20929.154633, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 29 17:22:54 2013] Writing source region out to fullrun_pn_xmm0085170101_pi300-10000_pass1_cl_src38_src.reg
[Sat Jun 29 17:22:54 2013] Extracting stamp from image fullrun_pn_xmm0085170101_pi300-10000_cl_sm2.00.img.gz, (221, 204) - (296, 279)
[Sat Jun 29 17:22:54 2013] XMMSAS bgd. selection expression = annulus(22460.010010, 20929.154633, 1087.500000, 2175.000000, X, Y) && !ellipse(19771.649400, 23587.230000, 1484.224043, 313.759209, 118.076200, X, Y) && !ellipse(20764.314484, 23529.272614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19619.366287, 23255.876282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23599.405212, 22456.481476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19536.258560, 21686.788483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20183.375488, 19320.756470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21512.568115, 18150.428848, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 29 17:22:54 2013] Writing fullrun_pn_xmm0085170101_pi300-10000_pass1_cl_src38.gif
[Sat Jun 29 17:43:00 2013] Mean detx,y = (4102.20, -1701.12) 
[Sat Jun 29 17:43:03 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 29 17:43:18 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 29 17:43:19 2013] Setting source spectrum file to fullrun_pn_xmm0085170101_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Sat Jun 29 17:43:19 2013] Setting bgd. spectrum file to fullrun_pn_xmm0085170101_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Sat Jun 29 18:10:51 2013] Not generating rmf since there are only 73 counts
[Sat Jun 29 18:10:51 2013] rmf not generated due to insufficient counts
[Sat Jun 29 18:44:40 2013] Updating aperture counts using extracted products
[Sat Jun 29 18:44:40 2013] Total counts from fullrun_pn_xmm0085170101_pi300-10000_pass1_cl_src38_src_b10.pi.gz = 228.00
[Sat Jun 29 18:44:40 2013] Total counts from fullrun_pn_xmm0085170101_pi300-10000_pass1_cl_src38_bgd.pi.gz = 1191.00
[Sat Jun 29 18:44:40 2013] Got source and background scale factors 1195630.000000, 7953525.000000
[Sat Jun 29 18:44:40 2013] User source parameters:
  Position = (258.7, 241.1) = 10 11 31.11 55 42 22.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 49.0 +/- 16.1
  Background aperture counts = 179.0
  Rate = 0.002 +/- 0.0006

[Sat Jun 29 18:44:40 2013] Updating counts from extracted products
[Sat Jun 29 18:44:40 2013] Set source signif. to 48.96/13.38 = 3.66
[Sat Jun 29 18:44:44 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 29 18:44:44 2013] Using photon index=1.80, rate=0.00176, arf fullrun_pn_xmm0085170101_pi300-10000_pass1_cl_src38.arf
[Sat Jun 29 18:44:44 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 29 18:44:44 2013] Updating source flux to 5.3e-15
[Sat Jun 29 18:44:59 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 29 18:45:03 2013] xmm0085170101/analysis//spectral/fullrun_pn_xmm0085170101_pi300-10000_pass1_cl_src38_pl.csv not found, spectral fit skipped or did not complete