[Sat Jun 29 13:41:02 2013] Detection parameters:
  Position = (229.5, 274.3) = 10 11 46.21 55 44 49.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.3 +/- 12.0
  Background counts = 45.6
  Rate = 0.003 +/- 0.0006

[Sat Jun 29 13:41:03 2013] Off-axis axis estimate = 5.30'
[Sat Jun 29 13:42:56 2013] Using EEF radius (= 9.08 ")to estimate initial spatial extent for simple fitting
[Sat Jun 29 13:42:56 2013] Initial guess for spatial extent in simple fitting = 9.08"
[Sat Jun 29 13:42:56 2013] source mask rpix=2.1, npix_max = 26, mask sum = 23, frac = 0.859
[Sat Jun 29 13:42:56 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 9.08"
[Sat Jun 29 14:29:47 2013] fullrun_pn_xmm0085170101_pi300-10000_cl_pass0_src26.ximg exists
[Sat Jun 29 14:29:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085170101_pi300-10000_cl_pass0_src26.csv
[Sat Jun 29 14:29:47 2013] fullrun_pn_xmm0085170101_pi300-10000_cl_pass0_src26_1.ximg exists
[Sat Jun 29 14:29:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085170101_pi300-10000_cl_pass0_src26.csv
[Sat Jun 29 14:29:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085170101_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085170101_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 14:29:48 2013] fullrun_pn_xmm0085170101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sat Jun 29 14:29:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085170101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sat Jun 29 14:29:48 2013] fullrun_pn_xmm0085170101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sat Jun 29 14:29:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085170101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sat Jun 29 14:29:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085170101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085170101_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 15:32:07 2013] Spatial fit model total counts = 399.546000, observed total counts = 342.000000
[Sat Jun 29 15:32:07 2013] Poor agreement between spatial fit and data for source 26
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 29 15:32:07 2013] Spatial fit model total counts = 431.071000, observed total counts = 427.000000
[Sat Jun 29 15:32:07 2013] Offset between fit and detection position for source 26 = 3.061650 pixels
[Sat Jun 29 15:32:07 2013] Warning, changing simple spatial fit ID from 26 to 30
[Sat Jun 29 15:32:07 2013] 413.658900 total counts/ 321.505000 bgd. counts: snr = 5.139488
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 3.061650 pixels
  Position = (227.8, 271.7) = 10 11 47.05 55 44 36.3
  Extent = 18.6 (15.2-37.1)" x 3.9 (2.6-5.5)", rotation angle = 118 (112-124) degrees
  Source counts = 92.2 +/- 20.3
  Background counts = 321.5
  Rate = 0.003 +/- 0.0007
[Sat Jun 29 15:32:07 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 15:32:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 15:32:07 2013] Assessing source extent using major axis lower bound
[Sat Jun 29 15:32:07 2013] Source does appear to be extended
[Sat Jun 29 15:32:07 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.78
[Sat Jun 29 15:32:07 2013] Source is asymmetric
[Sat Jun 29 15:32:07 2013] Source is confused with source 29
[Sat Jun 29 15:32:07 2013] Source is confused with source 30
[Sat Jun 29 15:32:30 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 29 15:32:30 2013] Initial guess for spatial extent in simple fitting = 11.24"
[Sat Jun 29 15:32:30 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.947
[Sat Jun 29 15:32:30 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 11.24"
[Sat Jun 29 16:20:28 2013] fullrun_pn_xmm0085170101_pi300-10000_cl_pass1_src25.ximg exists
[Sat Jun 29 16:20:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085170101_pi300-10000_cl_pass1_src25.csv
[Sat Jun 29 16:20:28 2013] fullrun_pn_xmm0085170101_pi300-10000_cl_pass1_src25_1.ximg exists
[Sat Jun 29 16:20:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085170101_pi300-10000_cl_pass1_src25.csv
[Sat Jun 29 16:20:28 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085170101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085170101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 16:20:29 2013] fullrun_pn_xmm0085170101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sat Jun 29 16:20:29 2013] fullrun_pn_xmm0085170101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sat Jun 29 16:20:29 2013] Fit fullrun_pn_xmm0085170101_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Sat Jun 29 17:22:36 2013] Spatial fit model total counts = 421.613000, observed total counts = 380.000000
[Sat Jun 29 17:22:36 2013] Poor agreement between spatial fit and data for source 26
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 29 17:22:36 2013] Source 26 is offset by -1.521685 and -2.674621 pixels which is larger than
2 X fitted extent = 2.002717 x 2.002717, not incorporating fit results
[Sat Jun 29 17:22:36 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 17:22:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 17:22:36 2013] Assessing source extent using major axis lower bound
[Sat Jun 29 17:22:36 2013] Source does appear to be extended
[Sat Jun 29 17:22:36 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.78
[Sat Jun 29 17:22:36 2013] Source is asymmetric
[Sat Jun 29 17:22:54 2013] XMMSAS src. selection expression = ellipse(19771.649400, 23587.230000, 1113.168032, 235.319407, 118.076200, X, Y)
[Sat Jun 29 17:22:54 2013] Writing source region out to fullrun_pn_xmm0085170101_pi300-10000_pass1_cl_src26_src.reg
[Sat Jun 29 17:22:54 2013] Extracting stamp from image fullrun_pn_xmm0085170101_pi300-10000_cl_sm2.00.img.gz, (164, 208) - (292, 336)
[Sat Jun 29 17:22:54 2013] XMMSAS bgd. selection expression = annulus(19771.649400, 23587.230000, 1855.280053, 3710.560107, X, Y) && !ellipse(21380.006600, 26927.510400, 428.709612, 428.709612, 0.000000, X, Y) && !ellipse(22179.478800, 25969.441600, 399.284011, 399.284011, 0.000000, X, Y) && !ellipse(15664.718735, 23667.679291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20764.314484, 23529.272614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19619.366287, 23255.876282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23599.405212, 22456.481476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19536.258560, 21686.788483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22460.010010, 20929.154633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20183.375488, 19320.756470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19412.470474, 19271.026443, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 29 17:22:54 2013] Writing fullrun_pn_xmm0085170101_pi300-10000_pass1_cl_src26.gif
[Sat Jun 29 17:35:55 2013] Mean detx,y = (5505.46, 1781.44) 
[Sat Jun 29 17:35:57 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 29 17:36:37 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 29 17:36:38 2013] Setting source spectrum file to fullrun_pn_xmm0085170101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sat Jun 29 17:36:38 2013] Setting bgd. spectrum file to fullrun_pn_xmm0085170101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Sat Jun 29 18:01:19 2013] Not generating rmf since there are only 92 counts
[Sat Jun 29 18:01:19 2013] rmf not generated due to insufficient counts
[Sat Jun 29 18:44:38 2013] Updating aperture counts using extracted products
[Sat Jun 29 18:44:38 2013] Total counts from fullrun_pn_xmm0085170101_pi300-10000_pass1_cl_src26_src_b10.pi.gz = 169.00
[Sat Jun 29 18:44:38 2013] Total counts from fullrun_pn_xmm0085170101_pi300-10000_pass1_cl_src26_bgd.pi.gz = 3160.00
[Sat Jun 29 18:44:38 2013] Got source and background scale factors 830400.000000, 21894954.000000
[Sat Jun 29 18:44:38 2013] User source parameters:
  Position = (227.8, 271.7) = 10 11 47.05 55 44 36.3
  Extent = 18.6 (15.2-37.1)" x 3.9 (2.6-5.5)", rotation angle = 118 (112-124) degrees
  Source aperture counts = 49.2 +/- 14.0
  Background aperture counts = 119.8
  Rate = 0.002 +/- 0.0005

[Sat Jun 29 18:44:43 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 29 18:44:43 2013] Using photon index=1.80, rate=0.00331, arf fullrun_pn_xmm0085170101_pi300-10000_pass1_cl_src26.arf
[Sat Jun 29 18:44:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 29 18:44:43 2013] Updating source flux to 1.1e-14
[Sat Jun 29 18:44:59 2013] Flag b found in src. 26 procflags, skipping spectral fitting
[Sat Jun 29 18:44:59 2013] Flag p found in src. 26 procflags, skipping spectral fitting
[Sat Jun 29 18:44:59 2013] Flag c found in src. 26 procflags, skipping spectral fitting
[Sat Jun 29 18:44:59 2013] Source 26 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 29 18:45:03 2013] xmm0085170101/analysis//spectral/fullrun_pn_xmm0085170101_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete