[Sat Jun 29 13:41:19 2013] Detection parameters:
  Position = (332.5, 217.0) = 10 10 53.16 55 40 37.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.1 +/- 9.4
  Background counts = 12.2
  Rate = 0.002 +/- 0.0004

[Sat Jun 29 13:41:19 2013] Off-axis axis estimate = 6.40'
[Sat Jun 29 14:29:48 2013] Using EEF radius (= 9.63 ")to estimate initial spatial extent for simple fitting
[Sat Jun 29 14:29:48 2013] Initial guess for spatial extent in simple fitting = 9.63"
[Sat Jun 29 14:29:48 2013] source mask rpix=2.2, npix_max = 29, mask sum = 26, frac = 0.883
[Sat Jun 29 14:29:48 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 9.63"
[Sat Jun 29 15:00:16 2013] fullrun_mos1_xmm0085170101_pi300-10000_cl_pass0_src19.ximg exists
[Sat Jun 29 15:00:16 2013] fullrun_mos1_xmm0085170101_pi300-10000_cl_pass0_src19_1.ximg exists
[Sat Jun 29 15:00:16 2013] Fit fullrun_mos1_xmm0085170101_pi300-10000_cl_pass0_src19 appears to have run properly
[Sat Jun 29 15:00:16 2013] fullrun_mos1_xmm0085170101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sat Jun 29 15:00:16 2013] fullrun_mos1_xmm0085170101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sat Jun 29 15:00:16 2013] Fit fullrun_mos1_xmm0085170101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sat Jun 29 15:32:12 2013] Spatial fit model total counts = 159.154000, observed total counts = 148.000000
[Sat Jun 29 15:32:12 2013] Offset between fit and detection position for source 27 = 0.158297 pixels
[Sat Jun 29 15:32:12 2013] 157.669300 total counts/ 124.258000 bgd. counts: snr = 2.997307
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.158297 pixels
  Position = (332.6, 216.9) = 10 10 53.10 55 40 38.4
  Extent = 5.2 (3.7-7.3)", rotation angle = 0
  Source counts = 33.4 +/- 12.6
  Background counts = 124.3
  Rate = 0.001 +/- 0.0004
[Sat Jun 29 15:32:12 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 15:32:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 15:32:12 2013] Assessing source extent using major axis lower bound
[Sat Jun 29 15:32:12 2013] Source does appear to be extended
[Sat Jun 29 15:32:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 16:20:29 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 29 16:20:29 2013] Initial guess for spatial extent in simple fitting = 5.22"
[Sat Jun 29 16:20:29 2013] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.039
[Sat Jun 29 16:20:29 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 5.22"
[Sat Jun 29 16:51:39 2013] fullrun_mos1_xmm0085170101_pi300-10000_cl_pass1_src19.ximg exists
[Sat Jun 29 16:51:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085170101_pi300-10000_cl_pass1_src19.csv
[Sat Jun 29 16:51:39 2013] fullrun_mos1_xmm0085170101_pi300-10000_cl_pass1_src19_1.ximg exists
[Sat Jun 29 16:51:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085170101_pi300-10000_cl_pass1_src19.csv
[Sat Jun 29 16:51:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085170101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085170101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 16:51:39 2013] fullrun_mos1_xmm0085170101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sat Jun 29 16:51:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085170101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sat Jun 29 16:51:39 2013] fullrun_mos1_xmm0085170101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sat Jun 29 16:51:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085170101_pi300-10000_cl_pass1_tfrozen_src19.csv
[Sat Jun 29 16:51:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085170101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085170101_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 17:22:40 2013] Spatial fit model total counts = 174.765000, observed total counts = 148.000000
[Sat Jun 29 17:22:40 2013] Poor agreement between spatial fit and data for source 27
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 29 17:22:40 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 17:22:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 17:22:40 2013] Assessing source extent using major axis lower bound
[Sat Jun 29 17:22:40 2013] Source does appear to be extended
[Sat Jun 29 17:22:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 18:12:50 2013] XMMSAS src. selection expression = ellipse(28887.221600, 18824.285000, 312.948609, 312.948609, 0.000000, X, Y)
[Sat Jun 29 18:12:50 2013] Writing source region out to fullrun_mos1_xmm0085170101_pi300-10000_pass1_cl_src27_src.reg
[Sat Jun 29 18:12:50 2013] Extracting stamp from image fullrun_mos1_xmm0085170101_pi300-10000_cl_sm2.00.img.gz, (315, 199) - (351, 235)
[Sat Jun 29 18:12:50 2013] XMMSAS bgd. selection expression = annulus(28887.221600, 18824.285000, 521.581015, 1043.162030, X, Y) && !ellipse(28381.636000, 19573.420400, 471.852814, 147.961604, 92.077740, X, Y)
[Sat Jun 29 18:12:50 2013] Writing fullrun_mos1_xmm0085170101_pi300-10000_pass1_cl_src27.gif
[Sat Jun 29 18:16:33 2013] Mean detx,y = (6252.38, -1187.98) 
[Sat Jun 29 18:16:34 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 29 18:16:40 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 29 18:16:40 2013] Setting source spectrum file to fullrun_mos1_xmm0085170101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Sat Jun 29 18:16:40 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0085170101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Sat Jun 29 18:26:30 2013] Not generating rmf since there are only 33 counts
[Sat Jun 29 18:26:30 2013] rmf not generated due to insufficient counts
[Sat Jun 29 18:44:46 2013] Updating aperture counts using extracted products
[Sat Jun 29 18:44:46 2013] Total counts from fullrun_mos1_xmm0085170101_pi300-10000_pass1_cl_src27_src_b10.pi.gz = 50.00
[Sat Jun 29 18:44:46 2013] Total counts from fullrun_mos1_xmm0085170101_pi300-10000_pass1_cl_src27_bgd.pi.gz = 121.00
[Sat Jun 29 18:44:47 2013] Got source and background scale factors 297368.000000, 2235262.000000
[Sat Jun 29 18:44:47 2013] User source parameters:
  Position = (332.6, 216.9) = 10 10 53.10 55 40 38.4
  Extent = 5.2 (3.7-7.3)", rotation angle = 0
  Source aperture counts = 33.9 +/- 8.1
  Background aperture counts = 16.1
  Rate = 0.001 +/- 0.0002

[Sat Jun 29 18:44:48 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 29 18:44:48 2013] Using photon index=1.80, rate=0.00103, arf fullrun_mos1_xmm0085170101_pi300-10000_pass1_cl_src27.arf
[Sat Jun 29 18:44:48 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 29 18:44:48 2013] Updating source flux to 1.7e-14
[Sat Jun 29 18:44:55 2013] Flag p found in src. 27 procflags, skipping spectral fitting
[Sat Jun 29 18:44:55 2013] Source 27 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 29 18:44:57 2013] xmm0085170101/analysis//spectral/fullrun_mos1_xmm0085170101_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete