[Sat Jun 29 13:41:19 2013] Detection parameters:
  Position = (219.9, 308.2) = 10 11 51.19 55 47 16.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 38.3 +/- 8.7
  Background counts = 11.8
  Rate = 0.002 +/- 0.0003

[Sat Jun 29 13:41:19 2013] Off-axis axis estimate = 5.74'
[Sat Jun 29 14:29:48 2013] Using EEF radius (= 9.30 ")to estimate initial spatial extent for simple fitting
[Sat Jun 29 14:29:48 2013] Initial guess for spatial extent in simple fitting = 9.30"
[Sat Jun 29 14:29:48 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.078
[Sat Jun 29 14:29:48 2013] Giving source the simple spatial ID 24 for pass 0, mean size = 9.30"
[Sat Jun 29 15:00:16 2013] fullrun_mos1_xmm0085170101_pi300-10000_cl_pass0_src24.ximg exists
[Sat Jun 29 15:00:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085170101_pi300-10000_cl_pass0_src24.csv
[Sat Jun 29 15:00:16 2013] fullrun_mos1_xmm0085170101_pi300-10000_cl_pass0_src24_1.ximg exists
[Sat Jun 29 15:00:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085170101_pi300-10000_cl_pass0_src24.csv
[Sat Jun 29 15:00:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085170101_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085170101_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 15:00:16 2013] fullrun_mos1_xmm0085170101_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Sat Jun 29 15:00:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085170101_pi300-10000_cl_pass0_tfrozen_src24.csv
[Sat Jun 29 15:00:16 2013] fullrun_mos1_xmm0085170101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Sat Jun 29 15:00:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085170101_pi300-10000_cl_pass0_tfrozen_src24.csv
[Sat Jun 29 15:00:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085170101_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085170101_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 29 15:32:12 2013] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 10.701273 pixels away
[Sat Jun 29 15:32:12 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 15:32:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 15:32:12 2013] Assessing source extent using major
[Sat Jun 29 15:32:12 2013] Source does appear to be extended
[Sat Jun 29 15:32:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 16:20:29 2013] Using EEF radius (= 9.30 ")to estimate initial spatial extent for simple fitting
[Sat Jun 29 16:20:29 2013] Initial guess for spatial extent in simple fitting = 9.30"
[Sat Jun 29 16:20:29 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.078
[Sat Jun 29 16:20:29 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 9.30"
[Sat Jun 29 16:51:39 2013] fullrun_mos1_xmm0085170101_pi300-10000_cl_pass1_src23.ximg exists
[Sat Jun 29 16:51:39 2013] fullrun_mos1_xmm0085170101_pi300-10000_cl_pass1_src23_1.ximg exists
[Sat Jun 29 16:51:39 2013] Fit fullrun_mos1_xmm0085170101_pi300-10000_cl_pass1_src23 appears to have run properly
[Sat Jun 29 16:51:39 2013] fullrun_mos1_xmm0085170101_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Sat Jun 29 16:51:39 2013] fullrun_mos1_xmm0085170101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Sat Jun 29 16:51:39 2013] Fit fullrun_mos1_xmm0085170101_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Sat Jun 29 17:22:40 2013] Spatial fit model total counts = 143.900000, observed total counts = 135.000000
[Sat Jun 29 17:22:40 2013] Offset between fit and detection position for source 14 = 0.132714 pixels
[Sat Jun 29 17:22:40 2013] 144.366800 total counts/ 121.668000 bgd. counts: snr = 2.057855
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.132714 pixels
  Position = (219.8, 308.3) = 10 11 51.23 55 47 15.4
  Extent = 3.5 (2.4-5.2)", rotation angle = 0
  Source counts = 22.7 +/- 12.0
  Background counts = 121.7
  Rate = 0.0007 +/- 0.0004
[Sat Jun 29 17:22:40 2013] Vigneting correction estimate = 1.000000
[Sat Jun 29 17:22:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 29 17:22:40 2013] Assessing source extent using major axis lower bound
[Sat Jun 29 17:22:40 2013] Source does appear to be extended
[Sat Jun 29 17:22:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 29 18:12:50 2013] XMMSAS src. selection expression = ellipse(19074.318940, 26771.307000, 211.925406, 211.925406, 0.000000, X, Y)
[Sat Jun 29 18:12:50 2013] Writing source region out to fullrun_mos1_xmm0085170101_pi300-10000_pass1_cl_src14_src.reg
[Sat Jun 29 18:12:50 2013] Extracting stamp from image fullrun_mos1_xmm0085170101_pi300-10000_cl_sm2.00.img.gz, (208, 296) - (232, 320)
[Sat Jun 29 18:12:50 2013] XMMSAS bgd. selection expression = annulus(19074.318940, 26771.307000, 353.209010, 706.418020, X, Y)
[Sat Jun 29 18:12:50 2013] Writing fullrun_mos1_xmm0085170101_pi300-10000_pass1_cl_src14.gif
[Sat Jun 29 18:17:38 2013] Mean detx,y = (-4956.74, 4549.58) 
[Sat Jun 29 18:17:39 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 29 18:17:45 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 29 18:17:45 2013] Setting source spectrum file to fullrun_mos1_xmm0085170101_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sat Jun 29 18:17:45 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0085170101_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Sat Jun 29 18:26:53 2013] Not generating rmf since there are only 22 counts
[Sat Jun 29 18:26:53 2013] rmf not generated due to insufficient counts
[Sat Jun 29 18:44:47 2013] Updating aperture counts using extracted products
[Sat Jun 29 18:44:47 2013] Total counts from fullrun_mos1_xmm0085170101_pi300-10000_pass1_cl_src14_src_b10.pi.gz = 31.00
[Sat Jun 29 18:44:47 2013] Total counts from fullrun_mos1_xmm0085170101_pi300-10000_pass1_cl_src14_bgd.pi.gz = 69.00
[Sat Jun 29 18:44:47 2013] Got source and background scale factors 139200.000000, 1090776.000000
[Sat Jun 29 18:44:47 2013] User source parameters:
  Position = (219.8, 308.3) = 10 11 51.23 55 47 15.4
  Extent = 3.5 (2.4-5.2)", rotation angle = 0
  Source aperture counts = 22.2 +/- 6.6
  Background aperture counts = 8.8
  Rate = 0.0007 +/- 0.0002

[Sat Jun 29 18:44:48 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 29 18:44:48 2013] Using photon index=1.80, rate=0.000698, arf fullrun_mos1_xmm0085170101_pi300-10000_pass1_cl_src14.arf
[Sat Jun 29 18:44:48 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 29 18:44:48 2013] Updating source flux to 1.4e-14
[Sat Jun 29 18:44:55 2013] Source 14 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 29 18:44:57 2013] xmm0085170101/analysis//spectral/fullrun_mos1_xmm0085170101_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete