[Mon Jul  1 17:30:22 2013] Detection parameters:
  Position = (244.4, 177.4) = 8 49 32.55 44 43 22.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.6 +/- 10.0
  Background counts = 15.6
  Rate = 0.002 +/- 0.0004

[Mon Jul  1 17:30:22 2013] Off-axis axis estimate = 9.61'
[Mon Jul  1 18:59:18 2013] Using EEF radius (= 11.23 ")to estimate initial spatial extent for simple fitting
[Mon Jul  1 18:59:18 2013] Initial guess for spatial extent in simple fitting = 11.23"
[Mon Jul  1 18:59:18 2013] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.105
[Mon Jul  1 18:59:18 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 11.23"
[Mon Jul  1 19:44:29 2013] fullrun_mos2_xmm0085150101_pi300-10000_cl_pass0_src28.ximg exists
[Mon Jul  1 19:44:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085150101_pi300-10000_cl_pass0_src28.csv
[Mon Jul  1 19:44:29 2013] fullrun_mos2_xmm0085150101_pi300-10000_cl_pass0_src28_1.ximg exists
[Mon Jul  1 19:44:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085150101_pi300-10000_cl_pass0_src28.csv
[Mon Jul  1 19:44:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085150101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085150101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  1 19:44:29 2013] fullrun_mos2_xmm0085150101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Mon Jul  1 19:44:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085150101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Mon Jul  1 19:44:29 2013] fullrun_mos2_xmm0085150101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Mon Jul  1 19:44:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085150101_pi300-10000_cl_pass0_tfrozen_src28.csv
[Mon Jul  1 19:44:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085150101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085150101_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  1 19:44:45 2013] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 42 at 14.439538 pixels away
[Mon Jul  1 19:44:45 2013] Vigneting correction estimate = 1.000000
[Mon Jul  1 19:44:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  1 19:44:45 2013] Assessing source extent using major
[Mon Jul  1 19:44:45 2013] Source does appear to be extended
[Mon Jul  1 19:44:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  1 21:01:49 2013] Using EEF radius (= 11.23 ")to estimate initial spatial extent for simple fitting
[Mon Jul  1 21:01:49 2013] Initial guess for spatial extent in simple fitting = 11.23"
[Mon Jul  1 21:01:49 2013] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.105
[Mon Jul  1 21:01:49 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 11.23"
[Mon Jul  1 21:38:33 2013] fullrun_mos2_xmm0085150101_pi300-10000_cl_pass1_src26.ximg exists
[Mon Jul  1 21:38:33 2013] fullrun_mos2_xmm0085150101_pi300-10000_cl_pass1_src26_1.ximg exists
[Mon Jul  1 21:38:33 2013] Fit fullrun_mos2_xmm0085150101_pi300-10000_cl_pass1_src26 appears to have run properly
[Mon Jul  1 21:38:34 2013] fullrun_mos2_xmm0085150101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Mon Jul  1 21:38:34 2013] fullrun_mos2_xmm0085150101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Mon Jul  1 21:38:34 2013] Fit fullrun_mos2_xmm0085150101_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Mon Jul  1 21:38:49 2013] Spatial fit model total counts = 148.200000, observed total counts = 137.000000
[Mon Jul  1 21:38:49 2013] Offset between fit and detection position for source 42 = 0.047241 pixels
[Mon Jul  1 21:38:49 2013] 149.958800 total counts/ 102.586000 bgd. counts: snr = 4.677190
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 0.047241 pixels
  Position = (244.4, 177.4) = 8 49 32.53 44 43 22.2
  Extent = 10.2 (7.0-15.7)" x 4.3 (3.0-6.6)", rotation angle = 2 (346-20) degrees
  Source counts = 47.4 +/- 12.2
  Background counts = 102.6
  Rate = 0.001 +/- 0.0003
[Mon Jul  1 21:38:49 2013] Vigneting correction estimate = 1.000000
[Mon Jul  1 21:38:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  1 21:38:49 2013] Assessing source extent using major axis lower bound
[Mon Jul  1 21:38:49 2013] Source does appear to be extended
[Mon Jul  1 21:38:49 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.06
[Mon Jul  1 22:58:30 2013] XMMSAS src. selection expression = ellipse(21214.464600, 15385.737000, 613.776018, 259.234207, 2.445685, X, Y)
[Mon Jul  1 22:58:30 2013] Writing source region out to fullrun_mos2_xmm0085150101_pi300-10000_pass1_cl_src42_src.reg
[Mon Jul  1 22:58:30 2013] Extracting stamp from image fullrun_mos2_xmm0085150101_pi300-10000_cl_sm2.00.img.gz, (209, 142) - (280, 213)
[Mon Jul  1 22:58:30 2013] XMMSAS bgd. selection expression = annulus(21214.464600, 15385.737000, 1022.960029, 2045.920059, X, Y) && !ellipse(21480.755554, 17381.824417, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul  1 22:58:30 2013] Writing fullrun_mos2_xmm0085150101_pi300-10000_pass1_cl_src42.gif
[Mon Jul  1 23:03:25 2013] Mean detx,y = (-7377.07, 6078.21) 
[Mon Jul  1 23:03:26 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  1 23:03:35 2013] Binned source spectrum to 10 counts/bin
[Mon Jul  1 23:03:35 2013] Setting source spectrum file to fullrun_mos2_xmm0085150101_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Mon Jul  1 23:03:35 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0085150101_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Mon Jul  1 23:23:45 2013] Not generating rmf since there are only 47 counts
[Mon Jul  1 23:23:45 2013] rmf not generated due to insufficient counts
[Mon Jul  1 23:25:36 2013] Updating aperture counts using extracted products
[Mon Jul  1 23:25:36 2013] Total counts from fullrun_mos2_xmm0085150101_pi300-10000_pass1_cl_src42_src_b10.pi.gz = 73.00
[Mon Jul  1 23:25:36 2013] Total counts from fullrun_mos2_xmm0085150101_pi300-10000_pass1_cl_src42_bgd.pi.gz = 579.00
[Mon Jul  1 23:25:36 2013] Got source and background scale factors 499200.000000, 8155156.000000
[Mon Jul  1 23:25:36 2013] User source parameters:
  Position = (244.4, 177.4) = 8 49 32.53 44 43 22.2
  Extent = 10.2 (7.0-15.7)" x 4.3 (3.0-6.6)", rotation angle = 2 (346-20) degrees
  Source aperture counts = 37.6 +/- 9.6
  Background aperture counts = 35.4
  Rate = 0.0008 +/- 0.0002

[Mon Jul  1 23:25:37 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jul  1 23:25:37 2013] Using photon index=1.80, rate=0.000987, arf fullrun_mos2_xmm0085150101_pi300-10000_pass1_cl_src42.arf
[Mon Jul  1 23:25:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  1 23:25:37 2013] Updating source flux to 2.2e-14
[Mon Jul  1 23:25:42 2013] Source 42 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Jul  1 23:25:45 2013] xmm0085150101/analysis//spectral/fullrun_mos2_xmm0085150101_pi300-10000_pass1_cl_src42_pl.csv not found, spectral fit skipped or did not complete