[Wed May  8 02:31:57 2013] Detection parameters:
  Position = (366.3, 368.9) = 3 19 28.36 41 34 45.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 530.1 +/- 62.5
  Background counts = 1946.0
  Rate = 0.01 +/- 0.001

[Wed May  8 02:32:06 2013] Off-axis axis estimate = 7.09'
[Wed May  8 03:00:42 2013] Using EEF radius (= 9.97 ")to estimate initial spatial extent for simple fitting
[Wed May  8 03:00:42 2013] Initial guess for spatial extent in simple fitting = 9.97"
[Wed May  8 03:00:42 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.154
[Wed May  8 03:00:42 2013] Giving source the simple spatial ID 85 for pass 0, mean size = 9.97"
[Thu May  9 08:51:40 2013] fullrun_pn_xmm0085110101_pi300-10000_cl_pass0_src85.ximg exists
[Thu May  9 08:51:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085110101_pi300-10000_cl_pass0_src85.csv
[Thu May  9 08:51:40 2013] fullrun_pn_xmm0085110101_pi300-10000_cl_pass0_src85_1.ximg exists
[Thu May  9 08:51:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085110101_pi300-10000_cl_pass0_src85.csv
[Thu May  9 08:51:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085110101_pi300-10000_cl_pass0_src85_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085110101_pi300-10000_cl_pass0_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 08:51:42 2013] fullrun_pn_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src85.ximg exists
[Thu May  9 08:51:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src85.csv
[Thu May  9 08:51:42 2013] fullrun_pn_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src85_1.ximg exists
[Thu May  9 08:51:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src85.csv
[Thu May  9 08:51:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src85_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 11:23:51 2013] Warning: source 85 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 97 at 13.260719 pixels away
[Sat May 11 11:23:51 2013] Spatial fit model total counts = 12984.700000, observed total counts = 12977.000000
[Sat May 11 11:23:51 2013] Offset between fit and detection position for source 97 = 0.535718 pixels
[Sat May 11 11:23:51 2013] Warning, changing simple spatial fit ID from 85 to 87
[Sat May 11 11:23:51 2013] 12681.251700 total counts/ 12618.900000 bgd. counts: snr = 0.555057
Spatial fit parameters:
  Offset between fit and detection position for source 97 = 0.535718 pixels
  Position = (366.4, 369.4) = 3 19 28.30 41 34 44.7
  Extent = 3.6 (2.5-10.5)", rotation angle = 0
  Source counts = 62.4 +/- 112.6
  Background counts = 12618.9
  Rate = 0.002 +/- 0.004
  Deleting source due to low Poisson probability