[Wed May  8 02:31:57 2013] Detection parameters:
  Position = (256.9, 384.0) = 3 20 10.77 41 35 50.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 383.7 +/- 54.5
  Background counts = 1566.8
  Rate = 0.007 +/- 0.001

[Wed May  8 02:32:06 2013] Off-axis axis estimate = 6.89'
[Wed May  8 03:00:42 2013] Using EEF radius (= 9.88 ")to estimate initial spatial extent for simple fitting
[Wed May  8 03:00:42 2013] Initial guess for spatial extent in simple fitting = 9.88"
[Wed May  8 03:00:42 2013] source mask rpix=2.3, npix_max = 30, mask sum = 35, frac = 1.140
[Wed May  8 03:00:42 2013] Giving source the simple spatial ID 81 for pass 0, mean size = 9.88"
[Thu May  9 08:51:40 2013] fullrun_pn_xmm0085110101_pi300-10000_cl_pass0_src81.ximg exists
[Thu May  9 08:51:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085110101_pi300-10000_cl_pass0_src81.csv
[Thu May  9 08:51:40 2013] fullrun_pn_xmm0085110101_pi300-10000_cl_pass0_src81_1.ximg exists
[Thu May  9 08:51:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085110101_pi300-10000_cl_pass0_src81.csv
[Thu May  9 08:51:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085110101_pi300-10000_cl_pass0_src81_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085110101_pi300-10000_cl_pass0_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 08:51:42 2013] fullrun_pn_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src81.ximg exists
[Thu May  9 08:51:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src81.csv
[Thu May  9 08:51:42 2013] fullrun_pn_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists
[Thu May  9 08:51:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src81.csv
[Thu May  9 08:51:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src81_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 11:23:51 2013] Spatial fit model total counts = 12768.300000, observed total counts = 12527.000000
[Sat May 11 11:23:51 2013] Offset between fit and detection position for source 93 = 1.228304 pixels
[Sat May 11 11:23:51 2013] Warning, changing simple spatial fit ID from 81 to 39
[Sat May 11 11:23:51 2013] 12649.316000 total counts/ 12495.200000 bgd. counts: snr = 1.378720
Spatial fit parameters:
  Offset between fit and detection position for source 93 = 1.228304 pixels
  Position = (256.1, 384.9) = 3 20 11.08 41 35 52.5
  Extent = 8.3 (3.4-19.2)", rotation angle = 0
  Source counts = 154.1 +/- 112.5
  Background counts = 12495.2
  Rate = 0.005 +/- 0.004
  Deleting source due to low Poisson probability