[Wed May  8 02:31:43 2013] Detection parameters:
  Position = (227.4, 332.7) = 3 20 22.17 41 31 56.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3845.4 +/- 488.3
  Background counts = 2030.0
  Rate = 0.08 +/- 0.01

[Wed May  8 02:32:06 2013] Off-axis axis estimate = 5.72'
[Wed May  8 03:00:42 2013] Using EEF radius (= 9.29 ")to estimate initial spatial extent for simple fitting
[Wed May  8 03:00:42 2013] Initial guess for spatial extent in simple fitting = 9.29"
[Wed May  8 03:00:42 2013] source mask rpix=2.1, npix_max = 27, mask sum = 2, frac = 0.072
[Wed May  8 03:00:42 2013] Skipping simple spatial due to low active detector fraction
[Sat May 11 11:23:51 2013] Source 3 is offset by 0.932392 and 2.344467 pixels which is larger than
2 X fitted extent = 1.097117 x 1.097117, not incorporating fit results
[Sat May 11 11:23:51 2013] Vigneting correction estimate = 1.000000
[Sat May 11 11:23:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 11:23:51 2013] Assessing source extent using major
[Sat May 11 11:23:51 2013] Source does appear to be extended
[Sat May 11 11:23:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 11:25:00 2013] Using EEF radius (= 9.29 ")to estimate initial spatial extent for simple fitting
[Sat May 11 11:25:00 2013] Initial guess for spatial extent in simple fitting = 9.29"
[Sat May 11 11:25:00 2013] source mask rpix=2.1, npix_max = 27, mask sum = 2, frac = 0.072
[Sat May 11 11:25:00 2013] Skipping simple spatial due to low active detector fraction
[Thu May 16 20:39:29 2013] Source 3 is offset by 0.217173 and 2.169249 pixels which is larger than
2 X fitted extent = 1.371467 x 1.371467, not incorporating fit results
[Thu May 16 20:39:29 2013] Vigneting correction estimate = 1.000000
[Thu May 16 20:39:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 20:39:29 2013] Assessing source extent using major
[Thu May 16 20:39:29 2013] Source does appear to be extended
[Thu May 16 20:39:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 16 20:40:33 2013] Counts = 3845.390381, rescaling region sizes by 2.000000
[Thu May 16 20:40:33 2013] XMMSAS src. selection expression = ellipse(19737.292068, 28899.382660, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu May 16 20:40:33 2013] Writing source region out to fullrun_pn_xmm0085110101_pi300-10000_pass1_cl_src3_src.reg
[Thu May 16 20:40:33 2013] Extracting stamp from image fullrun_pn_xmm0085110101_pi300-10000_cl_sm2.00.img.gz, (152, 258) - (302, 408)
[Thu May 16 20:40:33 2013] XMMSAS bgd. selection expression = annulus(19737.292068, 28899.382660, 4350.000000, 8700.000000, X, Y) && !ellipse(26878.146000, 26784.730000, 6953.712200, 6953.712200, 0.000000, X, Y) && !ellipse(27331.110000, 27198.377000, 6715.248193, 6715.248193, 0.000000, X, Y) && !ellipse(28440.819275, 28748.330078, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24631.473400, 28224.565432, 3610.944104, 3610.944104, 0.000000, X, Y) && !ellipse(27718.827200, 29006.202600, 3739.320108, 3739.320108, 0.000000, X, Y) && !ellipse(23096.441772, 27971.667633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22856.034800, 27563.132000, 1244.480036, 1244.480036, 0.000000, X, Y) && !ellipse(18532.291092, 20180.697891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24029.538544, 29229.763885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22127.786000, 25331.326000, 1320.600038, 1320.600038, 0.000000, X, Y) && !ellipse(27082.052000, 21966.502000, 1280.368037, 1280.368037, 0.000000, X, Y) && !ellipse(22183.748901, 31787.842133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22655.109528, 30918.033295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21307.306473, 30153.854797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19433.700089, 27453.289093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21737.835403, 33108.408569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25928.723480, 33335.424194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27810.496735, 35486.767883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22096.507294, 34122.335052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21744.175613, 33625.082581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20004.972122, 33708.466431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28294.426270, 33084.728363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26872.936859, 32913.112579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23593.155273, 32738.629364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22850.960419, 32840.978088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24544.737800, 33140.878000, 1477.736043, 1477.736043, 0.000000, X, Y) && !ellipse(19917.997345, 32927.359467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24114.337524, 32391.691376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19649.261917, 31152.443176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20998.132294, 30655.270355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21194.734558, 27625.645630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20673.762054, 27443.768158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21243.098000, 24638.020000, 2641.200076, 2641.200076, 0.000000, X, Y) && !ellipse(22147.300659, 24491.075562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23940.977386, 23463.852692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28923.585907, 21799.445358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20329.230850, 18887.083984, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(11561.700180, 36658.405762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23352.598999, 35747.428040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23320.993530, 33703.809509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27353.334000, 33594.424000, 1499.424043, 1499.424043, 0.000000, X, Y) && !ellipse(20957.465210, 33692.169861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27539.205841, 33086.499268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20864.820618, 32833.865265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20638.483353, 32479.198486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19551.093536, 32065.260834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20622.935501, 31616.128113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21089.341843, 31356.341461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20675.437378, 30236.466034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20655.507401, 29658.601562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20304.280212, 28052.956665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19085.923111, 27864.043365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19001.621948, 26622.756104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20039.617599, 26127.919708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19965.381653, 25266.981323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21179.631424, 25101.129608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18653.215729, 25090.331604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20767.724869, 24482.637878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20777.302887, 23967.413513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21480.532000, 23110.916000, 1330.128038, 1330.128038, 0.000000, X, Y) && !ellipse(22116.369568, 23460.443634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22193.235321, 22886.859070, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27474.938202, 20928.235992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28098.506000, 20979.432000, 1430.240041, 1430.240041, 0.000000, X, Y) && !ellipse(28524.011963, 20484.473068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27607.915344, 19447.338974, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 16 20:40:33 2013] Writing fullrun_pn_xmm0085110101_pi300-10000_pass1_cl_src3.gif
[Thu May 16 20:51:46 2013] Mean detx,y = (-7477.13, -481.32) 
[Thu May 16 20:51:54 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 16 20:54:02 2013] Binned source spectrum to 10 counts/bin
[Thu May 16 20:54:03 2013] Setting source spectrum file to fullrun_pn_xmm0085110101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu May 16 20:54:03 2013] Setting bgd. spectrum file to fullrun_pn_xmm0085110101_pi300-10000_pass1_cl_src3_bgd.pi.gz