[Wed May  8 02:31:47 2013] Detection parameters:
  Position = (260.5, 290.1) = 3 20 9.34 41 28 59.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2696.3 +/- 102.4
  Background counts = 3295.1
  Rate = 0.08 +/- 0.003

[Wed May  8 02:32:06 2013] Off-axis axis estimate = 2.82'
[Wed May  8 03:00:42 2013] Using EEF radius (= 7.84 ")to estimate initial spatial extent for simple fitting
[Wed May  8 03:00:42 2013] Initial guess for spatial extent in simple fitting = 7.84"
[Wed May  8 03:00:42 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.944
[Wed May  8 03:00:42 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 7.84"
[Thu May  9 08:51:37 2013] fullrun_pn_xmm0085110101_pi300-10000_cl_pass0_src25.ximg exists
[Thu May  9 08:51:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085110101_pi300-10000_cl_pass0_src25.csv
[Thu May  9 08:51:37 2013] fullrun_pn_xmm0085110101_pi300-10000_cl_pass0_src25_1.ximg exists
[Thu May  9 08:51:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085110101_pi300-10000_cl_pass0_src25.csv
[Thu May  9 08:51:37 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085110101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085110101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  9 08:51:41 2013] fullrun_pn_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Thu May  9 08:51:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Thu May  9 08:51:41 2013] fullrun_pn_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Thu May  9 08:51:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Thu May  9 08:51:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 11:23:51 2013] Spatial fit model total counts = 29965.900000, observed total counts = 25904.000000
[Sat May 11 11:23:51 2013] Poor agreement between spatial fit and data for source 27
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 11 11:23:51 2013] Spatial fit model total counts = 22874.100000, observed total counts = 22875.000000
[Sat May 11 11:23:51 2013] Offset between fit and detection position for source 27 = 5.623063 pixels
[Sat May 11 11:23:51 2013] Warning, changing simple spatial fit ID from 25 to 51
[Sat May 11 11:23:51 2013] 23117.342000 total counts/ 22286.300000 bgd. counts: snr = 5.566779
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 5.623063 pixels
  Position = (255.0, 291.4) = 3 20 11.46 41 29 5.7
  Extent = 16.5 (16.5-33.0)", rotation angle = 0
  Source counts = 831.0 +/- 152.0
  Background counts = 22286.3
  Rate = 0.03 +/- 0.005
[Sat May 11 11:23:51 2013] Vigneting correction estimate = 1.000000
[Sat May 11 11:23:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 11:23:51 2013] Assessing source extent using major axis lower bound
[Sat May 11 11:23:51 2013] Source does appear to be extended
[Sat May 11 11:23:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 11:23:52 2013] Source is confused with source 63
[Sat May 11 11:23:52 2013] Source is confused with source 64
[Sat May 11 11:23:52 2013] Source is confused with source 111
[Sat May 11 11:25:00 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat May 11 11:25:00 2013] Initial guess for spatial extent in simple fitting = 16.51"
[Sat May 11 11:25:00 2013] source mask rpix=3.8, npix_max = 73, mask sum = 72, frac = 0.976
[Sat May 11 11:25:00 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 16.51"
[Sun May 12 15:03:56 2013] fullrun_pn_xmm0085110101_pi300-10000_cl_pass1_src23.ximg exists
[Sun May 12 15:03:56 2013] fullrun_pn_xmm0085110101_pi300-10000_cl_pass1_src23_1.ximg exists
[Sun May 12 15:03:56 2013] Fit fullrun_pn_xmm0085110101_pi300-10000_cl_pass1_src23 appears to have run properly
[Sun May 12 15:03:58 2013] fullrun_pn_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Sun May 12 15:03:58 2013] fullrun_pn_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Sun May 12 15:03:58 2013] Fit fullrun_pn_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Thu May 16 20:39:29 2013] Warning, spatial fit 23 centroid is now closest to src. 63
[Thu May 16 20:39:29 2013] Spatial fit model total counts = 22880.700000, observed total counts = 22875.000000
[Thu May 16 20:39:29 2013] Offset between fit and detection position for source 27 = 0.350022 pixels
[Thu May 16 20:39:29 2013] Warning, changing simple spatial fit ID from 23 to 47
[Thu May 16 20:39:29 2013] 23111.380000 total counts/ 22391.500000 bgd. counts: snr = 4.810813
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.350022 pixels
  Position = (254.9, 291.7) = 3 20 11.51 41 29 7.1
  Extent = 16.5 (16.5-33.0)", rotation angle = 0
  Source counts = 719.9 +/- 152.0
  Background counts = 22391.5
  Rate = 0.02 +/- 0.005
[Thu May 16 20:39:29 2013] Vigneting correction estimate = 1.000000
[Thu May 16 20:39:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 20:39:29 2013] Assessing source extent using major axis lower bound
[Thu May 16 20:39:29 2013] Source does appear to be extended
[Thu May 16 20:39:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 16 20:40:36 2013] XMMSAS src. selection expression = ellipse(22127.786000, 25331.326000, 990.450028, 990.450028, 0.000000, X, Y)
[Thu May 16 20:40:36 2013] Writing source region out to fullrun_pn_xmm0085110101_pi300-10000_pass1_cl_src27_src.reg
[Thu May 16 20:40:36 2013] Extracting stamp from image fullrun_pn_xmm0085110101_pi300-10000_cl_sm2.00.img.gz, (198, 235) - (312, 349)
[Thu May 16 20:40:37 2013] XMMSAS bgd. selection expression = annulus(22127.786000, 25331.326000, 1650.750047, 3301.500095, X, Y) && !ellipse(26878.146000, 26784.730000, 6953.712200, 6953.712200, 0.000000, X, Y) && !ellipse(27331.110000, 27198.377000, 6715.248193, 6715.248193, 0.000000, X, Y) && !ellipse(19737.292068, 28899.382660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24631.473400, 28224.565432, 3610.944104, 3610.944104, 0.000000, X, Y) && !ellipse(27718.827200, 29006.202600, 3739.320108, 3739.320108, 0.000000, X, Y) && !ellipse(23096.441772, 27971.667633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22856.034800, 27563.132000, 1244.480036, 1244.480036, 0.000000, X, Y) && !ellipse(24029.538544, 29229.763885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19433.700089, 27453.289093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21194.734558, 27625.645630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20673.762054, 27443.768158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21243.098000, 24638.020000, 2641.200076, 2641.200076, 0.000000, X, Y) && !ellipse(22147.300659, 24491.075562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23940.977386, 23463.852692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20304.280212, 28052.956665, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19085.923111, 27864.043365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19001.621948, 26622.756104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20039.617599, 26127.919708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19965.381653, 25266.981323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21179.631424, 25101.129608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18653.215729, 25090.331604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20767.724869, 24482.637878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20777.302887, 23967.413513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21480.532000, 23110.916000, 1330.128038, 1330.128038, 0.000000, X, Y) && !ellipse(22116.369568, 23460.443634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22193.235321, 22886.859070, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 16 20:40:37 2013] Writing fullrun_pn_xmm0085110101_pi300-10000_pass1_cl_src27.gif
[Thu May 16 22:25:54 2013] Mean detx,y = (-4705.07, 2524.88) 
[Thu May 16 22:25:57 2013] Setting backscal keywords in source and bgd. spectrum
[Thu May 16 22:26:18 2013] Binned source spectrum to 10 counts/bin
[Thu May 16 22:26:19 2013] Setting source spectrum file to fullrun_pn_xmm0085110101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Thu May 16 22:26:19 2013] Setting bgd. spectrum file to fullrun_pn_xmm0085110101_pi300-10000_pass1_cl_src27_bgd.pi.gz