[Wed May  8 02:32:52 2013] Detection parameters:
  Position = (393.1, 355.2) = 3 19 17.97 41 33 45.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 178.4 +/- 36.8
  Background counts = 717.0
  Rate = 0.005 +/- 0.001

[Wed May  8 02:32:54 2013] Off-axis axis estimate = 8.00'
[Fri May 10 06:57:21 2013] Using EEF radius (= 10.43 ")to estimate initial spatial extent for simple fitting
[Fri May 10 06:57:21 2013] Initial guess for spatial extent in simple fitting = 10.43"
[Fri May 10 06:57:21 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.072
[Fri May 10 06:57:21 2013] Giving source the simple spatial ID 75 for pass 0, mean size = 10.43"
[Sat May 11 11:23:24 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_src75.ximg exists
[Sat May 11 11:23:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_src75.csv
[Sat May 11 11:23:24 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_src75_1.ximg exists
[Sat May 11 11:23:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_src75.csv
[Sat May 11 11:23:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_src75_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 11:23:26 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src75.ximg exists
[Sat May 11 11:23:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src75.csv
[Sat May 11 11:23:26 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src75_1.ximg exists
[Sat May 11 11:23:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src75.csv
[Sat May 11 11:23:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src75_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 11:24:32 2013] Source 68 is offset by -1.520777 and -7.245131 pixels which is larger than
2 X fitted extent = 2.377609 x 2.377609, not incorporating fit results
[Sat May 11 11:24:32 2013] Vigneting correction estimate = 1.000000
[Sat May 11 11:24:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 11:24:32 2013] Assessing source extent using major
[Sat May 11 11:24:32 2013] Source does appear to be extended
[Sat May 11 11:24:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 11:24:32 2013] Deleting source due to low Poisson probability 0.9