[Wed May  8 02:32:51 2013] Detection parameters:
  Position = (370.8, 376.5) = 3 19 26.61 41 35 15.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 241.3 +/- 38.6
  Background counts = 707.4
  Rate = 0.007 +/- 0.001

[Wed May  8 02:32:54 2013] Off-axis axis estimate = 7.72'
[Fri May 10 06:57:21 2013] Using EEF radius (= 10.29 ")to estimate initial spatial extent for simple fitting
[Fri May 10 06:57:21 2013] Initial guess for spatial extent in simple fitting = 10.29"
[Fri May 10 06:57:21 2013] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.914
[Fri May 10 06:57:21 2013] Giving source the simple spatial ID 65 for pass 0, mean size = 10.29"
[Sat May 11 11:23:23 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_src65.ximg exists
[Sat May 11 11:23:23 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_src65_1.ximg exists
[Sat May 11 11:23:23 2013] Fit fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_src65 appears to have run properly
[Sat May 11 11:23:25 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src65.ximg exists
[Sat May 11 11:23:25 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src65_1.ximg exists
[Sat May 11 11:23:25 2013] Fit fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src65 appears to have run properly
[Sat May 11 11:24:32 2013] Spatial fit model total counts = 12562.400000, observed total counts = 12558.000000
[Sat May 11 11:24:32 2013] Offset between fit and detection position for source 61 = 1.516040 pixels
[Sat May 11 11:24:32 2013] Warning, changing simple spatial fit ID from 65 to 46
[Sat May 11 11:24:32 2013] 11888.040000 total counts/ 11549.200000 bgd. counts: snr = 3.152962
Spatial fit parameters:
  Offset between fit and detection position for source 61 = 1.516040 pixels
  Position = (370.4, 375.1) = 3 19 26.77 41 35 9.5
  Extent = 19.8 (19.8-39.7)" x 4.8 (3.4-7.2)", rotation angle = 91 (83-99) degrees
  Source counts = 338.8 +/- 109.0
  Background counts = 11549.2
  Rate = 0.006 +/- 0.002
[Sat May 11 11:24:32 2013] Spatial fit model total counts = 11080.300000, observed total counts = 11089.000000
[Sat May 11 11:24:32 2013] Offset between fit and detection position for source 61 = 0.892956 pixels
[Sat May 11 11:24:32 2013] Warning, changing simple spatial fit ID from 46 to 66
[Sat May 11 11:24:32 2013] 10197.118000 total counts/ 9656.730000 bgd. counts: snr = 5.499088
Spatial fit parameters:
  Offset between fit and detection position for source 61 = 0.892956 pixels
  Position = (370.4, 376.0) = 3 19 26.76 41 35 13.4
  Extent = 20.1 (20.0-40.2)" x 4.8 (3.8-6.2)", rotation angle = 91 (87-97) degrees
  Source counts = 540.4 +/- 101.0
  Background counts = 9656.7
  Rate = 0.01 +/- 0.002
[Sat May 11 11:24:32 2013] Vigneting correction estimate = 1.000000
[Sat May 11 11:24:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 11:24:32 2013] Assessing source extent using major axis lower bound
[Sat May 11 11:24:32 2013] Source does appear to be extended
[Sat May 11 11:24:32 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.23
[Sat May 11 11:24:32 2013] Source is asymmetric
[Sat May 11 11:24:32 2013] Source is confused with source 41
[Sat May 11 11:24:32 2013] Source is confused with source 46
[Sat May 11 11:24:32 2013] Source is confused with source 63
[Sat May 11 11:24:32 2013] Source is confused with source 62
[Tue May 14 07:34:30 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 14 07:34:30 2013] Initial guess for spatial extent in simple fitting = 12.46"
[Tue May 14 07:34:30 2013] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.928
[Tue May 14 07:34:30 2013] Giving source the simple spatial ID 62 for pass 1, mean size = 12.46"
[Thu May 16 20:39:00 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_src62.ximg exists
[Thu May 16 20:39:00 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_src62_1.ximg exists
[Thu May 16 20:39:00 2013] Fit fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_src62 appears to have run properly
[Thu May 16 20:39:02 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src62.ximg exists
[Thu May 16 20:39:02 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src62_1.ximg exists
[Thu May 16 20:39:02 2013] Fit fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src62 appears to have run properly
[Thu May 16 20:40:06 2013] Warning, spatial fit 62 centroid is now closest to src. 63
[Thu May 16 20:40:06 2013] Spatial fit model total counts = 15839.600000, observed total counts = 15859.000000
[Thu May 16 20:40:06 2013] Offset between fit and detection position for source 61 = 1.007285 pixels
[Thu May 16 20:40:06 2013] Warning, changing simple spatial fit ID from 62 to 63
[Thu May 16 20:40:06 2013] 14016.461000 total counts/ 13241.000000 bgd. counts: snr = 6.739064
Spatial fit parameters:
  Offset between fit and detection position for source 61 = 1.007285 pixels
  Position = (370.3, 375.0) = 3 19 26.79 41 35 9.1
  Extent = 25.5 (25.5-51.1)" x 5.5 (4.5-6.9)", rotation angle = 93 (88-96) degrees
  Source counts = 775.5 +/- 118.4
  Background counts = 13241.0
  Rate = 0.01 +/- 0.002
[Thu May 16 20:40:06 2013] Vigneting correction estimate = 1.000000
[Thu May 16 20:40:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 20:40:06 2013] Assessing source extent using major axis lower bound
[Thu May 16 20:40:06 2013] Source does appear to be extended
[Thu May 16 20:40:06 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.72
[Thu May 16 20:40:06 2013] Source is asymmetric
[Sun May 19 11:47:32 2013] XMMSAS src. selection expression = ellipse(32168.856000, 32572.764000, 1532.604044, 331.020610, 92.651320, X, Y)
[Sun May 19 11:47:32 2013] Writing source region out to fullrun_mos2_xmm0085110101_pi300-10000_pass1_cl_src61_src.reg
[Sun May 19 11:47:32 2013] Extracting stamp from image fullrun_mos2_xmm0085110101_pi300-10000_cl_sm2.00.img.gz, (282, 287) - (458, 463)
[Sun May 19 11:47:32 2013] XMMSAS bgd. selection expression = annulus(32168.856000, 32572.764000, 2554.340074, 5108.680147, X, Y) && !ellipse(27399.861938, 27187.820679, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27913.568000, 26455.799600, 3547.872102, 3547.872102, -0.000000, X, Y) && !ellipse(28263.755371, 26911.761353, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28288.871948, 27342.784119, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(29265.802000, 29107.700000, 7773.360224, 7773.360224, 0.000000, X, Y) && !ellipse(28821.186000, 28598.346000, 3886.680112, 3886.680112, 0.000000, X, Y) && !ellipse(29828.012000, 27327.404600, 3990.816115, 3990.816115, 0.000000, X, Y) && !ellipse(31238.322754, 26834.566376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30798.160000, 27592.596000, 1419.568041, 1419.568041, 0.000000, X, Y) && !ellipse(31179.544000, 27980.268000, 2331.304067, 2331.304067, 0.000000, X, Y) && !ellipse(31955.702000, 28196.458400, 826.008024, 826.008024, 0.000000, X, Y) && !ellipse(27314.885071, 32648.907959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30841.808000, 29178.139260, 2246.256065, 903.664026, 99.853720, X, Y) && !ellipse(30666.034000, 30843.292000, 2183.248063, 1461.872042, 119.667400, X, Y) && !ellipse(33521.104600, 27947.242000, 478.145614, 478.145614, 0.000000, X, Y) && !ellipse(32572.143097, 28224.941498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31670.898000, 29091.182000, 1505.376043, 740.879221, 290.109000, X, Y) && !ellipse(32849.798000, 25592.566000, 3186.496092, 1889.464054, 292.374000, X, Y) && !ellipse(26651.120000, 32274.548000, 1461.864042, 623.417618, 91.041100, X, Y) && !ellipse(27219.795197, 32229.344299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26513.820000, 31493.092000, 1427.728041, 615.436818, 97.579070, X, Y) && !ellipse(33005.369537, 27705.224823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32180.268738, 30050.218384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34201.338000, 26698.154000, 1551.288045, 460.172013, 86.764180, X, Y) && !ellipse(31295.142000, 30888.550000, 1556.880045, 557.930416, 99.389430, X, Y) && !ellipse(34186.897400, 27702.548553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33605.038000, 27290.822000, 1212.264035, 640.784018, 102.383600, X, Y) && !ellipse(34313.953827, 27330.071838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31838.982000, 30774.428000, 8736.864251, 8736.864251, 0.000000, X, Y) && !ellipse(32699.308380, 30221.082794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29870.589722, 31961.276611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31448.164000, 31828.506000, 1586.416046, 463.021613, 95.287420, X, Y) && !ellipse(31238.705078, 31611.757935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28538.370000, 32982.512600, 1841.736053, 1841.736053, 0.000000, X, Y) && !ellipse(27647.960000, 32992.668000, 1487.056043, 338.311210, 94.391480, X, Y) && !ellipse(34541.922607, 29129.403778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24528.190000, 25718.270000, 7103.808204, 7103.808204, 0.000000, X, Y) && !ellipse(32169.028600, 31631.119120, 1586.416046, 667.688819, 96.018850, X, Y) && !ellipse(27823.873400, 35482.202200, 640.532818, 384.492811, 3.801954, X, Y) && !ellipse(31176.980957, 32481.468536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34281.400513, 28664.136444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28767.836578, 34130.594849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31279.342000, 32176.292000, 3076.560089, 3076.560089, 0.000000, X, Y) && !ellipse(26949.217400, 33344.063600, 1517.744044, 1090.616031, 93.806000, X, Y)
[Sun May 19 11:47:32 2013] Writing fullrun_mos2_xmm0085110101_pi300-10000_pass1_cl_src61.gif
[Sun May 19 15:59:39 2013] Mean detx,y = (-4085.74, 5554.63) 
[Sun May 19 15:59:42 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 16:00:08 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 16:00:09 2013] Setting source spectrum file to fullrun_mos2_xmm0085110101_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Sun May 19 16:00:09 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0085110101_pi300-10000_pass1_cl_src61_bgd.pi.gz