[Wed May  8 02:32:50 2013] Detection parameters:
  Position = (331.2, 392.9) = 3 19 41.94 41 36 16.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 375.1 +/- 32.2
  Background counts = 642.9
  Rate = 0.007 +/- 0.0006

[Wed May  8 02:32:54 2013] Off-axis axis estimate = 7.25'
[Fri May 10 06:57:21 2013] Using EEF radius (= 10.05 ")to estimate initial spatial extent for simple fitting
[Fri May 10 06:57:21 2013] Initial guess for spatial extent in simple fitting = 10.05"
[Fri May 10 06:57:21 2013] source mask rpix=2.3, npix_max = 31, mask sum = 28, frac = 0.886
[Fri May 10 06:57:21 2013] Giving source the simple spatial ID 64 for pass 0, mean size = 10.05"
[Sat May 11 11:23:23 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_src64.ximg exists
[Sat May 11 11:23:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_src64.csv
[Sat May 11 11:23:23 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_src64_1.ximg exists
[Sat May 11 11:23:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_src64.csv
[Sat May 11 11:23:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 11:23:25 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src64.ximg exists
[Sat May 11 11:23:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src64.csv
[Sat May 11 11:23:25 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src64_1.ximg exists
[Sat May 11 11:23:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src64.csv
[Sat May 11 11:23:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 11:24:32 2013] Source 58 is offset by -4.056637 and -6.270565 pixels which is larger than
2 X fitted extent = 2.195421 x 2.195421, not incorporating fit results
[Sat May 11 11:24:32 2013] Vigneting correction estimate = 1.000000
[Sat May 11 11:24:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 11:24:32 2013] Assessing source extent using major
[Sat May 11 11:24:32 2013] Source does appear to be extended
[Sat May 11 11:24:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 07:34:30 2013] Using EEF radius (= 10.05 ")to estimate initial spatial extent for simple fitting
[Tue May 14 07:34:30 2013] Initial guess for spatial extent in simple fitting = 10.05"
[Tue May 14 07:34:30 2013] source mask rpix=2.3, npix_max = 31, mask sum = 28, frac = 0.886
[Tue May 14 07:34:30 2013] Giving source the simple spatial ID 61 for pass 1, mean size = 10.05"
[Thu May 16 20:39:00 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_src61.ximg exists
[Thu May 16 20:39:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_src61.csv
[Thu May 16 20:39:00 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_src61_1.ximg exists
[Thu May 16 20:39:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_src61.csv
[Thu May 16 20:39:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 20:39:02 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Thu May 16 20:39:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src61.csv
[Thu May 16 20:39:02 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Thu May 16 20:39:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src61.csv
[Thu May 16 20:39:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 20:40:06 2013] Spatial fit model total counts = 2887.220000, observed total counts = 5756.000000
[Thu May 16 20:40:06 2013] Poor agreement between spatial fit and data for source 58
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 16 20:40:06 2013] Warning: source 67 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 58 at 13.642529 pixels away
[Thu May 16 20:40:06 2013] Vigneting correction estimate = 1.000000
[Thu May 16 20:40:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 20:40:06 2013] Assessing source extent using major
[Thu May 16 20:40:06 2013] Source does appear to be extended
[Thu May 16 20:40:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 16 20:40:06 2013] Source is confused with source 40
[Sun May 19 11:47:32 2013] XMMSAS src. selection expression = ellipse(28767.836578, 34130.594849, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 19 11:47:32 2013] Writing source region out to fullrun_mos2_xmm0085110101_pi300-10000_pass1_cl_src58_src.reg
[Sun May 19 11:47:32 2013] Extracting stamp from image fullrun_mos2_xmm0085110101_pi300-10000_cl_sm2.00.img.gz, (294, 355) - (369, 430)
[Sun May 19 11:47:32 2013] XMMSAS bgd. selection expression = annulus(28767.836578, 34130.594849, 1087.500000, 2175.000000, X, Y) && !ellipse(29265.802000, 29107.700000, 7773.360224, 7773.360224, 0.000000, X, Y) && !ellipse(28821.186000, 28598.346000, 3886.680112, 3886.680112, 0.000000, X, Y) && !ellipse(27314.885071, 32648.907959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30666.034000, 30843.292000, 2183.248063, 1461.872042, 119.667400, X, Y) && !ellipse(26651.120000, 32274.548000, 1461.864042, 623.417618, 91.041100, X, Y) && !ellipse(27219.795197, 32229.344299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26513.820000, 31493.092000, 1427.728041, 615.436818, 97.579070, X, Y) && !ellipse(31295.142000, 30888.550000, 1556.880045, 557.930416, 99.389430, X, Y) && !ellipse(31838.982000, 30774.428000, 8736.864251, 8736.864251, 0.000000, X, Y) && !ellipse(26080.487610, 31900.532196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29870.589722, 31961.276611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31448.164000, 31828.506000, 1586.416046, 463.021613, 95.287420, X, Y) && !ellipse(31238.705078, 31611.757935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28538.370000, 32982.512600, 1841.736053, 1841.736053, 0.000000, X, Y) && !ellipse(27647.960000, 32992.668000, 1487.056043, 338.311210, 94.391480, X, Y) && !ellipse(24528.190000, 25718.270000, 7103.808204, 7103.808204, 0.000000, X, Y) && !ellipse(32169.028600, 31631.119120, 1586.416046, 667.688819, 96.018850, X, Y) && !ellipse(27823.873400, 35482.202200, 640.532818, 384.492811, 3.801954, X, Y) && !ellipse(31176.980957, 32481.468536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26144.890656, 32410.889893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32168.856000, 32572.764000, 2043.472059, 441.360813, 92.651320, X, Y) && !ellipse(31279.342000, 32176.292000, 3076.560089, 3076.560089, 0.000000, X, Y) && !ellipse(26949.217400, 33344.063600, 1517.744044, 1090.616031, 93.806000, X, Y)
[Sun May 19 11:47:32 2013] Writing fullrun_mos2_xmm0085110101_pi300-10000_pass1_cl_src58.gif
[Sun May 19 15:58:36 2013] Mean detx,y = (-442.17, 6995.51) 
[Sun May 19 15:58:39 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 15:59:05 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 15:59:06 2013] Setting source spectrum file to fullrun_mos2_xmm0085110101_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Sun May 19 15:59:06 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0085110101_pi300-10000_pass1_cl_src58_bgd.pi.gz
[Tue May 21 10:28:19 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May 21 10:28:20 2013] rmf not generated due to insufficient counts