[Wed May  8 02:32:49 2013] Detection parameters:
  Position = (395.0, 314.7) = 3 19 17.27 41 30 37.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 657.5 +/- 42.9
  Background counts = 814.2
  Rate = 0.02 +/- 0.001

[Wed May  8 02:32:54 2013] Off-axis axis estimate = 7.10'
[Fri May 10 06:57:21 2013] Using EEF radius (= 9.98 ")to estimate initial spatial extent for simple fitting
[Fri May 10 06:57:21 2013] Initial guess for spatial extent in simple fitting = 9.98"
[Fri May 10 06:57:21 2013] source mask rpix=2.3, npix_max = 31, mask sum = 22, frac = 0.705
[Fri May 10 06:57:21 2013] Giving source the simple spatial ID 37 for pass 0, mean size = 9.98"
[Sat May 11 11:23:23 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_src37.ximg exists
[Sat May 11 11:23:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_src37.csv
[Sat May 11 11:23:23 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_src37_1.ximg exists
[Sat May 11 11:23:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_src37.csv
[Sat May 11 11:23:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 11:23:25 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Sat May 11 11:23:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src37.csv
[Sat May 11 11:23:25 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Sat May 11 11:23:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src37.csv
[Sat May 11 11:23:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 11:24:32 2013] Spatial fit model total counts = 13711.800000, observed total counts = 12363.000000
[Sat May 11 11:24:32 2013] Poor agreement between spatial fit and data for source 52
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 11 11:24:32 2013] Source 52 is offset by -7.085841 and 3.696895 pixels which is larger than
2 X fitted extent = 1.188795 x 1.188795, not incorporating fit results
[Sat May 11 11:24:32 2013] Warning, spatial fit 37 centroid is now closest to src. 25
[Sat May 11 11:24:32 2013] Vigneting correction estimate = 1.000000
[Sat May 11 11:24:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 11:24:32 2013] Assessing source extent using major
[Sat May 11 11:24:32 2013] Source does appear to be extended
[Sat May 11 11:24:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 11:24:32 2013] Source is confused with source 30
[Tue May 14 07:34:30 2013] Using EEF radius (= 9.98 ")to estimate initial spatial extent for simple fitting
[Tue May 14 07:34:30 2013] Initial guess for spatial extent in simple fitting = 9.98"
[Tue May 14 07:34:30 2013] source mask rpix=2.3, npix_max = 31, mask sum = 22, frac = 0.705
[Tue May 14 07:34:30 2013] Giving source the simple spatial ID 36 for pass 1, mean size = 9.98"
[Thu May 16 20:39:00 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_src36.ximg exists
[Thu May 16 20:39:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_src36.csv
[Thu May 16 20:39:00 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_src36_1.ximg exists
[Thu May 16 20:39:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_src36.csv
[Thu May 16 20:39:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 20:39:02 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Thu May 16 20:39:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src36.csv
[Thu May 16 20:39:02 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Thu May 16 20:39:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src36.csv
[Thu May 16 20:39:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 20:40:06 2013] Warning, spatial fit 36 centroid is now closest to src. 30
[Thu May 16 20:40:06 2013] Vigneting correction estimate = 1.000000
[Thu May 16 20:40:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 20:40:06 2013] Assessing source extent using major
[Thu May 16 20:40:06 2013] Source does appear to be extended
[Thu May 16 20:40:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 11:47:30 2013] XMMSAS src. selection expression = ellipse(34313.953827, 27330.071838, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May 19 11:47:30 2013] Writing source region out to fullrun_mos2_xmm0085110101_pi300-10000_pass1_cl_src52_src.reg
[Sun May 19 11:47:30 2013] Extracting stamp from image fullrun_mos2_xmm0085110101_pi300-10000_cl_sm2.00.img.gz, (357, 277) - (432, 352)
[Sun May 19 11:47:30 2013] XMMSAS bgd. selection expression = annulus(34313.953827, 27330.071838, 1087.500000, 2175.000000, X, Y) && !ellipse(29265.802000, 29107.700000, 7773.360224, 7773.360224, 0.000000, X, Y) && !ellipse(28821.186000, 28598.346000, 3886.680112, 3886.680112, 0.000000, X, Y) && !ellipse(29828.012000, 27327.404600, 3990.816115, 3990.816115, 0.000000, X, Y) && !ellipse(33756.148102, 25959.025330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30798.160000, 27592.596000, 1419.568041, 1419.568041, 0.000000, X, Y) && !ellipse(31179.544000, 27980.268000, 2331.304067, 2331.304067, 0.000000, X, Y) && !ellipse(31955.702000, 28196.458400, 826.008024, 826.008024, 0.000000, X, Y) && !ellipse(30841.808000, 29178.139260, 2246.256065, 903.664026, 99.853720, X, Y) && !ellipse(32322.694000, 25739.588000, 1425.768041, 1425.768041, 0.000000, X, Y) && !ellipse(30666.034000, 30843.292000, 2183.248063, 1461.872042, 119.667400, X, Y) && !ellipse(33521.104600, 27947.242000, 478.145614, 478.145614, 0.000000, X, Y) && !ellipse(32572.143097, 28224.941498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31670.898000, 29091.182000, 1505.376043, 740.879221, 290.109000, X, Y) && !ellipse(33415.102000, 25816.292000, 1514.712044, 773.985622, 114.605700, X, Y) && !ellipse(32849.798000, 25592.566000, 3186.496092, 1889.464054, 292.374000, X, Y) && !ellipse(33005.369537, 27705.224823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33200.946960, 26226.617767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32180.268738, 30050.218384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34201.338000, 26698.154000, 1551.288045, 460.172013, 86.764180, X, Y) && !ellipse(31295.142000, 30888.550000, 1556.880045, 557.930416, 99.389430, X, Y) && !ellipse(34186.897400, 27702.548553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33605.038000, 27290.822000, 1212.264035, 640.784018, 102.383600, X, Y) && !ellipse(31838.982000, 30774.428000, 8736.864251, 8736.864251, 0.000000, X, Y) && !ellipse(32699.308380, 30221.082794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33668.712677, 24380.015686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33916.586000, 24902.160000, 1593.248046, 1593.248046, 0.000000, X, Y) && !ellipse(34541.922607, 29129.403778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34281.400513, 28664.136444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31279.342000, 32176.292000, 3076.560089, 3076.560089, 0.000000, X, Y) && !ellipse(34291.379600, 24298.654000, 1588.440046, 1588.440046, 0.000000, X, Y)
[Sun May 19 11:47:30 2013] Writing fullrun_mos2_xmm0085110101_pi300-10000_pass1_cl_src52.gif
[Sun May 19 15:07:25 2013] Mean detx,y = (-6868.23, 1030.33) 
[Sun May 19 15:07:28 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 15:07:52 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 15:07:53 2013] Setting source spectrum file to fullrun_mos2_xmm0085110101_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Sun May 19 15:07:53 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0085110101_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Mon May 20 13:37:51 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 20 13:37:51 2013] rmf not generated due to insufficient counts