[Wed May  8 02:32:47 2013] Detection parameters:
  Position = (364.0, 369.0) = 3 19 29.23 41 34 39.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 588.3 +/- 48.1
  Background counts = 912.6
  Rate = 0.02 +/- 0.001

[Wed May  8 02:32:54 2013] Off-axis axis estimate = 6.98'
[Fri May 10 06:57:21 2013] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Fri May 10 06:57:21 2013] Initial guess for spatial extent in simple fitting = 9.92"
[Fri May 10 06:57:21 2013] source mask rpix=2.3, npix_max = 30, mask sum = 35, frac = 1.132
[Fri May 10 06:57:21 2013] Giving source the simple spatial ID 46 for pass 0, mean size = 9.92"
[Sat May 11 11:23:23 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_src46.ximg exists
[Sat May 11 11:23:23 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_src46_1.ximg exists
[Sat May 11 11:23:23 2013] Fit fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_src46 appears to have run properly
[Sat May 11 11:23:25 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Sat May 11 11:23:25 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Sat May 11 11:23:25 2013] Fit fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src46 appears to have run properly
[Sat May 11 11:24:32 2013] Warning, spatial fit 46 centroid is now closest to src. 61
[Sat May 11 11:24:32 2013] Spatial fit model total counts = 13452.000000, observed total counts = 13483.000000
[Sat May 11 11:24:32 2013] Offset between fit and detection position for source 41 = 3.243805 pixels
[Sat May 11 11:24:32 2013] Warning, changing simple spatial fit ID from 46 to 55
[Sat May 11 11:24:32 2013] 13221.348000 total counts/ 12612.300000 bgd. counts: snr = 5.423184
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 3.243805 pixels
  Position = (362.0, 366.4) = 3 19 30.01 41 34 31.9
  Extent = 19.8 (18.2-39.7)" x 5.8 (4.7-7.3)", rotation angle = 95 (90-102) degrees
  Source counts = 609.0 +/- 115.0
  Background counts = 12612.3
  Rate = 0.01 +/- 0.002
[Sat May 11 11:24:32 2013] Vigneting correction estimate = 1.000000
[Sat May 11 11:24:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 11:24:32 2013] Assessing source extent using major axis lower bound
[Sat May 11 11:24:32 2013] Source does appear to be extended
[Sat May 11 11:24:32 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.47
[Sat May 11 11:24:32 2013] Source is asymmetric
[Sat May 11 11:24:32 2013] Source is confused with source 19
[Tue May 14 07:34:30 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 14 07:34:30 2013] Initial guess for spatial extent in simple fitting = 12.81"
[Tue May 14 07:34:30 2013] source mask rpix=2.9, npix_max = 47, mask sum = 42, frac = 0.885
[Tue May 14 07:34:30 2013] Giving source the simple spatial ID 44 for pass 1, mean size = 12.81"
[Thu May 16 20:39:00 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_src44.ximg exists
[Thu May 16 20:39:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_src44.csv
[Thu May 16 20:39:00 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_src44_1.ximg exists
[Thu May 16 20:39:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_src44.csv
[Thu May 16 20:39:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 20:39:02 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Thu May 16 20:39:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src44.csv
[Thu May 16 20:39:02 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Thu May 16 20:39:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src44.csv
[Thu May 16 20:39:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 20:40:06 2013] Warning, spatial fit 44 centroid is now closest to src. 45
[Thu May 16 20:40:06 2013] Source 41 is offset by -6.104460 and 0.537448 pixels which is larger than
2 X fitted extent = 1.141885 x 1.141885, not incorporating fit results
[Thu May 16 20:40:06 2013] Vigneting correction estimate = 1.000000
[Thu May 16 20:40:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 20:40:06 2013] Assessing source extent using major axis lower bound
[Thu May 16 20:40:06 2013] Source does appear to be extended
[Thu May 16 20:40:06 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.47
[Thu May 16 20:40:06 2013] Source is asymmetric
[Sun May 19 11:47:31 2013] XMMSAS src. selection expression = ellipse(31448.164000, 31828.506000, 1189.812034, 347.266210, 95.287420, X, Y)
[Sun May 19 11:47:31 2013] Writing source region out to fullrun_mos2_xmm0085110101_pi300-10000_pass1_cl_src41_src.reg
[Sun May 19 11:47:31 2013] Extracting stamp from image fullrun_mos2_xmm0085110101_pi300-10000_cl_sm2.00.img.gz, (294, 298) - (430, 435)
[Sun May 19 11:47:31 2013] XMMSAS bgd. selection expression = annulus(31448.164000, 31828.506000, 1983.020057, 3966.040114, X, Y) && !ellipse(27399.861938, 27187.820679, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27913.568000, 26455.799600, 3547.872102, 3547.872102, -0.000000, X, Y) && !ellipse(28263.755371, 26911.761353, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28288.871948, 27342.784119, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(29265.802000, 29107.700000, 7773.360224, 7773.360224, 0.000000, X, Y) && !ellipse(28821.186000, 28598.346000, 3886.680112, 3886.680112, 0.000000, X, Y) && !ellipse(29828.012000, 27327.404600, 3990.816115, 3990.816115, 0.000000, X, Y) && !ellipse(30798.160000, 27592.596000, 1419.568041, 1419.568041, 0.000000, X, Y) && !ellipse(31179.544000, 27980.268000, 2331.304067, 2331.304067, 0.000000, X, Y) && !ellipse(31955.702000, 28196.458400, 826.008024, 826.008024, 0.000000, X, Y) && !ellipse(27314.885071, 32648.907959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30841.808000, 29178.139260, 2246.256065, 903.664026, 99.853720, X, Y) && !ellipse(30666.034000, 30843.292000, 2183.248063, 1461.872042, 119.667400, X, Y) && !ellipse(33521.104600, 27947.242000, 478.145614, 478.145614, 0.000000, X, Y) && !ellipse(32572.143097, 28224.941498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31670.898000, 29091.182000, 1505.376043, 740.879221, 290.109000, X, Y) && !ellipse(32849.798000, 25592.566000, 3186.496092, 1889.464054, 292.374000, X, Y) && !ellipse(26651.120000, 32274.548000, 1461.864042, 623.417618, 91.041100, X, Y) && !ellipse(27219.795197, 32229.344299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26513.820000, 31493.092000, 1427.728041, 615.436818, 97.579070, X, Y) && !ellipse(33005.369537, 27705.224823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32180.268738, 30050.218384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34201.338000, 26698.154000, 1551.288045, 460.172013, 86.764180, X, Y) && !ellipse(31295.142000, 30888.550000, 1556.880045, 557.930416, 99.389430, X, Y) && !ellipse(34186.897400, 27702.548553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33605.038000, 27290.822000, 1212.264035, 640.784018, 102.383600, X, Y) && !ellipse(34313.953827, 27330.071838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31838.982000, 30774.428000, 8736.864251, 8736.864251, 0.000000, X, Y) && !ellipse(32699.308380, 30221.082794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29870.589722, 31961.276611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31238.705078, 31611.757935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28538.370000, 32982.512600, 1841.736053, 1841.736053, 0.000000, X, Y) && !ellipse(27647.960000, 32992.668000, 1487.056043, 338.311210, 94.391480, X, Y) && !ellipse(34541.922607, 29129.403778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24528.190000, 25718.270000, 7103.808204, 7103.808204, 0.000000, X, Y) && !ellipse(32169.028600, 31631.119120, 1586.416046, 667.688819, 96.018850, X, Y) && !ellipse(27823.873400, 35482.202200, 640.532818, 384.492811, 3.801954, X, Y) && !ellipse(31176.980957, 32481.468536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34281.400513, 28664.136444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28767.836578, 34130.594849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32168.856000, 32572.764000, 2043.472059, 441.360813, 92.651320, X, Y) && !ellipse(31279.342000, 32176.292000, 3076.560089, 3076.560089, 0.000000, X, Y) && !ellipse(26949.217400, 33344.063600, 1517.744044, 1090.616031, 93.806000, X, Y)
[Sun May 19 11:47:31 2013] Writing fullrun_mos2_xmm0085110101_pi300-10000_pass1_cl_src41.gif
[Sun May 19 15:23:09 2013] Mean detx,y = (-3412.08, 4956.79) 
[Sun May 19 15:23:12 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 15:23:39 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 15:23:40 2013] Setting source spectrum file to fullrun_mos2_xmm0085110101_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Sun May 19 15:23:40 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0085110101_pi300-10000_pass1_cl_src41_bgd.pi.gz