[Wed May  8 02:32:45 2013] Detection parameters:
  Position = (392.5, 306.0) = 3 19 18.25 41 30 15.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 757.4 +/- 48.8
  Background counts = 760.2
  Rate = 0.02 +/- 0.001

[Wed May  8 02:32:54 2013] Off-axis axis estimate = 6.84'
[Fri May 10 06:57:21 2013] Using EEF radius (= 9.85 ")to estimate initial spatial extent for simple fitting
[Fri May 10 06:57:21 2013] Initial guess for spatial extent in simple fitting = 9.85"
[Fri May 10 06:57:21 2013] source mask rpix=2.3, npix_max = 30, mask sum = 24, frac = 0.785
[Fri May 10 06:57:21 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 9.85"
[Sat May 11 11:23:22 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_src33.ximg exists
[Sat May 11 11:23:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_src33.csv
[Sat May 11 11:23:22 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_src33_1.ximg exists
[Sat May 11 11:23:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_src33.csv
[Sat May 11 11:23:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 11:23:25 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Sat May 11 11:23:25 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Sat May 11 11:23:25 2013] Fit fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Sat May 11 11:24:32 2013] Spatial fit model total counts = 15599.500000, observed total counts = 15277.000000
[Sat May 11 11:24:32 2013] Offset between fit and detection position for source 32 = 4.778926 pixels
[Sat May 11 11:24:32 2013] Warning, changing simple spatial fit ID from 33 to 11
[Sat May 11 11:24:32 2013] 13748.080000 total counts/ 12743.900000 bgd. counts: snr = 8.895296
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 4.778926 pixels
  Position = (394.0, 301.5) = 3 19 17.67 41 29 49.3
  Extent = 19.4 (19.3-38.8)" x 6.7 (5.8-7.8)", rotation angle = 88 (84-93) degrees
  Source counts = 1004.2 +/- 117.3
  Background counts = 12743.9
  Rate = 0.02 +/- 0.002
[Sat May 11 11:24:32 2013] Vigneting correction estimate = 1.000000
[Sat May 11 11:24:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 11:24:32 2013] Assessing source extent using major axis lower bound
[Sat May 11 11:24:32 2013] Source does appear to be extended
[Sat May 11 11:24:32 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.48
[Sat May 11 11:24:32 2013] Source is asymmetric
[Sat May 11 11:24:32 2013] Source is confused with source 14
[Tue May 14 07:34:30 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 14 07:34:30 2013] Initial guess for spatial extent in simple fitting = 13.02"
[Tue May 14 07:34:30 2013] source mask rpix=3.0, npix_max = 48, mask sum = 43, frac = 0.881
[Tue May 14 07:34:30 2013] Giving source the simple spatial ID 32 for pass 1, mean size = 13.02"
[Thu May 16 20:38:59 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_src32.ximg exists
[Thu May 16 20:38:59 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_src32_1.ximg exists
[Thu May 16 20:39:00 2013] Fit fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_src32 appears to have run properly
[Thu May 16 20:39:01 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Thu May 16 20:39:02 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Thu May 16 20:39:02 2013] Fit fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly
[Thu May 16 20:40:06 2013] Spatial fit model total counts = 15690.800000, observed total counts = 15277.000000
[Thu May 16 20:40:06 2013] Offset between fit and detection position for source 32 = 5.948135 pixels
[Thu May 16 20:40:06 2013] Warning, changing simple spatial fit ID from 32 to 10
[Thu May 16 20:40:06 2013] 13363.258000 total counts/ 12834.900000 bgd. counts: snr = 4.663715
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 5.948135 pixels
  Position = (393.7, 307.4) = 3 19 17.78 41 30 15.2
  Extent = 19.4 (19.3-38.8)" x 5.8 (4.7-7.1)", rotation angle = 87 (79-97) degrees
  Source counts = 528.4 +/- 115.6
  Background counts = 12834.9
  Rate = 0.01 +/- 0.002
[Thu May 16 20:40:06 2013] Vigneting correction estimate = 1.000000
[Thu May 16 20:40:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 20:40:06 2013] Assessing source extent using major axis lower bound
[Thu May 16 20:40:06 2013] Source does appear to be extended
[Thu May 16 20:40:06 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.73
[Thu May 16 20:40:06 2013] Source is asymmetric
[Sun May 19 11:47:30 2013] XMMSAS src. selection expression = ellipse(34201.338000, 26698.154000, 1163.466033, 345.129010, 86.764180, X, Y)
[Sun May 19 11:47:30 2013] Writing source region out to fullrun_mos2_xmm0085110101_pi300-10000_pass1_cl_src32_src.reg
[Sun May 19 11:47:30 2013] Extracting stamp from image fullrun_mos2_xmm0085110101_pi300-10000_cl_sm2.00.img.gz, (327, 241) - (461, 374)
[Sun May 19 11:47:30 2013] XMMSAS bgd. selection expression = annulus(34201.338000, 26698.154000, 1939.110056, 3878.220112, X, Y) && !ellipse(27913.568000, 26455.799600, 3547.872102, 3547.872102, -0.000000, X, Y) && !ellipse(28263.755371, 26911.761353, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28288.871948, 27342.784119, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(29265.802000, 29107.700000, 7773.360224, 7773.360224, 0.000000, X, Y) && !ellipse(28821.186000, 28598.346000, 3886.680112, 3886.680112, 0.000000, X, Y) && !ellipse(29828.012000, 27327.404600, 3990.816115, 3990.816115, 0.000000, X, Y) && !ellipse(33756.148102, 25959.025330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31238.322754, 26834.566376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30798.160000, 27592.596000, 1419.568041, 1419.568041, 0.000000, X, Y) && !ellipse(31179.544000, 27980.268000, 2331.304067, 2331.304067, 0.000000, X, Y) && !ellipse(31955.702000, 28196.458400, 826.008024, 826.008024, 0.000000, X, Y) && !ellipse(30841.808000, 29178.139260, 2246.256065, 903.664026, 99.853720, X, Y) && !ellipse(32322.694000, 25739.588000, 1425.768041, 1425.768041, 0.000000, X, Y) && !ellipse(30666.034000, 30843.292000, 2183.248063, 1461.872042, 119.667400, X, Y) && !ellipse(33521.104600, 27947.242000, 478.145614, 478.145614, 0.000000, X, Y) && !ellipse(32572.143097, 28224.941498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31670.898000, 29091.182000, 1505.376043, 740.879221, 290.109000, X, Y) && !ellipse(33415.102000, 25816.292000, 1514.712044, 773.985622, 114.605700, X, Y) && !ellipse(32849.798000, 25592.566000, 3186.496092, 1889.464054, 292.374000, X, Y) && !ellipse(33005.369537, 27705.224823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33200.946960, 26226.617767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32180.268738, 30050.218384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31295.142000, 30888.550000, 1556.880045, 557.930416, 99.389430, X, Y) && !ellipse(34186.897400, 27702.548553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33605.038000, 27290.822000, 1212.264035, 640.784018, 102.383600, X, Y) && !ellipse(34313.953827, 27330.071838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31838.982000, 30774.428000, 8736.864251, 8736.864251, 0.000000, X, Y) && !ellipse(32699.308380, 30221.082794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33668.712677, 24380.015686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33916.586000, 24902.160000, 1593.248046, 1593.248046, 0.000000, X, Y) && !ellipse(31448.164000, 31828.506000, 1586.416046, 463.021613, 95.287420, X, Y) && !ellipse(38660.632385, 24237.668945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34541.922607, 29129.403778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24528.190000, 25718.270000, 7103.808204, 7103.808204, 0.000000, X, Y) && !ellipse(32169.028600, 31631.119120, 1586.416046, 667.688819, 96.018850, X, Y) && !ellipse(34281.400513, 28664.136444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32168.856000, 32572.764000, 2043.472059, 441.360813, 92.651320, X, Y) && !ellipse(31279.342000, 32176.292000, 3076.560089, 3076.560089, 0.000000, X, Y) && !ellipse(32969.404000, 23016.622000, 1507.832043, 1157.840033, 103.423100, X, Y) && !ellipse(34291.379600, 24298.654000, 1588.440046, 1588.440046, 0.000000, X, Y)
[Sun May 19 11:47:30 2013] Writing fullrun_mos2_xmm0085110101_pi300-10000_pass1_cl_src32.gif
[Sun May 19 14:59:53 2013] Mean detx,y = (-6914.35, 275.30) 
[Sun May 19 14:59:56 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 15:00:31 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 15:00:32 2013] Setting source spectrum file to fullrun_mos2_xmm0085110101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Sun May 19 15:00:32 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0085110101_pi300-10000_pass1_cl_src32_bgd.pi.gz