[Wed May  8 02:32:43 2013] Detection parameters:
  Position = (383.9, 331.9) = 3 19 21.54 41 32 1.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1122.0 +/- 64.0
  Background counts = 1043.8
  Rate = 0.03 +/- 0.002

[Wed May  8 02:32:54 2013] Off-axis axis estimate = 6.66'
[Fri May 10 06:57:21 2013] Using EEF radius (= 9.76 ")to estimate initial spatial extent for simple fitting
[Fri May 10 06:57:21 2013] Initial guess for spatial extent in simple fitting = 9.76"
[Fri May 10 06:57:21 2013] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.196
[Fri May 10 06:57:21 2013] Giving source the simple spatial ID 26 for pass 0, mean size = 9.76"
[Sat May 11 11:23:22 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_src26.ximg exists
[Sat May 11 11:23:22 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_src26_1.ximg exists
[Sat May 11 11:23:22 2013] Fit fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_src26 appears to have run properly
[Sat May 11 11:23:24 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sat May 11 11:23:24 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sat May 11 11:23:24 2013] Fit fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Sat May 11 11:24:32 2013] Spatial fit model total counts = 18091.200000, observed total counts = 18090.000000
[Sat May 11 11:24:32 2013] Offset between fit and detection position for source 26 = 0.490246 pixels
[Sat May 11 11:24:32 2013] 17600.006000 total counts/ 17358.200000 bgd. counts: snr = 1.835332
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 0.490246 pixels
  Position = (384.2, 332.4) = 3 19 21.44 41 32 3.6
  Extent = 7.6 (5.0-17.8)", rotation angle = 0
  Source counts = 241.8 +/- 132.7
  Background counts = 17358.2
  Rate = 0.005 +/- 0.002
[Sat May 11 11:24:32 2013] Vigneting correction estimate = 1.000000
[Sat May 11 11:24:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 11:24:32 2013] Assessing source extent using major axis lower bound
[Sat May 11 11:24:32 2013] Source does appear to be extended
[Sat May 11 11:24:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 14 07:34:30 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 14 07:34:30 2013] Initial guess for spatial extent in simple fitting = 7.60"
[Tue May 14 07:34:30 2013] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.990
[Tue May 14 07:34:30 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 7.60"
[Thu May 16 20:38:59 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_src25.ximg exists
[Thu May 16 20:38:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_src25.csv
[Thu May 16 20:38:59 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_src25_1.ximg exists
[Thu May 16 20:38:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_src25.csv
[Thu May 16 20:38:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 20:39:01 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Thu May 16 20:39:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Thu May 16 20:39:01 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Thu May 16 20:39:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Thu May 16 20:39:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 20:40:06 2013] Warning, spatial fit 25 centroid is now closest to src. 27
[Thu May 16 20:40:06 2013] Vigneting correction estimate = 1.000000
[Thu May 16 20:40:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 20:40:06 2013] Assessing source extent using major axis lower bound
[Thu May 16 20:40:06 2013] Source does appear to be extended
[Thu May 16 20:40:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 16 20:40:06 2013] Deleting source due to low Poisson probability 0.9