[Wed May  8 02:32:40 2013] Detection parameters:
  Position = (360.6, 315.1) = 3 19 30.57 41 30 46.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3554.9 +/- 92.8
  Background counts = 1627.7
  Rate = 0.08 +/- 0.002

[Wed May  8 02:32:54 2013] Off-axis axis estimate = 4.67'
[Fri May 10 06:57:21 2013] Using EEF radius (= 8.76 ")to estimate initial spatial extent for simple fitting
[Fri May 10 06:57:21 2013] Initial guess for spatial extent in simple fitting = 8.76"
[Fri May 10 06:57:21 2013] source mask rpix=2.0, npix_max = 25, mask sum = 22, frac = 0.870
[Fri May 10 06:57:21 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 8.76"
[Sat May 11 11:23:22 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_src13.ximg exists
[Sat May 11 11:23:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_src13.csv
[Sat May 11 11:23:22 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_src13_1.ximg exists
[Sat May 11 11:23:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_src13.csv
[Sat May 11 11:23:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 11:23:24 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sat May 11 11:23:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sat May 11 11:23:24 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sat May 11 11:23:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sat May 11 11:23:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 11:24:32 2013] Spatial fit model total counts = 44809.800000, observed total counts = 47743.000000
[Sat May 11 11:24:32 2013] Offset between fit and detection position for source 11 = 6.532656 pixels
[Sat May 11 11:24:32 2013] Warning, changing simple spatial fit ID from 13 to 12
[Sat May 11 11:24:32 2013] 40823.400000 total counts/ 25600.000000 bgd. counts: snr = 95.146250
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 6.532656 pixels
  Position = (354.3, 313.7) = 3 19 33.04 41 30 42.6
  Extent = 17.4 (17.3-34.7)", rotation angle = 0
  Source counts = 15223.4 +/- 202.0
  Background counts = 25600.0
  Rate = 0.3 +/- 0.004
[Sat May 11 11:24:32 2013] Vigneting correction estimate = 1.000000
[Sat May 11 11:24:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 11:24:32 2013] Assessing source extent using major axis lower bound
[Sat May 11 11:24:32 2013] Source does appear to be extended
[Sat May 11 11:24:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 11:24:32 2013] Source is confused with source 12
[Tue May 14 07:34:30 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 14 07:34:30 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 14 07:34:30 2013] Initial guess for spatial extent in simple fitting = 17.36"
[Tue May 14 07:34:30 2013] source mask rpix=4.0, npix_max = 80, mask sum = 76, frac = 0.942
[Tue May 14 07:34:30 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 17.36"
[Thu May 16 20:38:59 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_src12.ximg exists
[Thu May 16 20:38:59 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_src12_1.ximg exists
[Thu May 16 20:38:59 2013] Fit fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_src12 appears to have run properly
[Thu May 16 20:39:01 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Thu May 16 20:39:01 2013] fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Thu May 16 20:39:01 2013] Fit fullrun_mos2_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Thu May 16 20:40:06 2013] Spatial fit model total counts = 16719.100000, observed total counts = 47743.000000
[Thu May 16 20:40:06 2013] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 16 20:40:06 2013] Warning, spatial fit 12 centroid is now closest to src. 13
[Thu May 16 20:40:06 2013] Spatial fit model total counts = 38846.700000, observed total counts = 39815.000000
[Thu May 16 20:40:06 2013] Offset between fit and detection position for source 11 = 4.031369 pixels
[Thu May 16 20:40:06 2013] Warning, changing simple spatial fit ID from 12 to 13
[Thu May 16 20:40:06 2013] 33443.040000 total counts/ 25600.000000 bgd. counts: snr = 49.019000
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 4.031369 pixels
  Position = (354.6, 317.7) = 3 19 32.92 41 31 0.1
  Extent = 17.7 (17.7-35.5)", rotation angle = 0
  Source counts = 7843.0 +/- 182.9
  Background counts = 25600.0
  Rate = 0.1 +/- 0.003
[Thu May 16 20:40:06 2013] Vigneting correction estimate = 1.000000
[Thu May 16 20:40:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 20:40:06 2013] Assessing source extent using major axis lower bound
[Thu May 16 20:40:06 2013] Source does appear to be extended
[Thu May 16 20:40:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 19 11:47:28 2013] Counts = 7843.040000, rescaling region sizes by 2.000000
[Sun May 19 11:47:28 2013] XMMSAS src. selection expression = ellipse(30798.160000, 27592.596000, 2129.352061, 2129.352061, 0.000000, X, Y)
[Sun May 19 11:47:28 2013] Writing source region out to fullrun_mos2_xmm0085110101_pi300-10000_pass1_cl_src11_src.reg
[Sun May 19 11:47:28 2013] Extracting stamp from image fullrun_mos2_xmm0085110101_pi300-10000_cl_sm2.00.img.gz, (232, 195) - (477, 440)
[Sun May 19 11:47:28 2013] XMMSAS bgd. selection expression = annulus(30798.160000, 27592.596000, 7097.840204, 14195.680408, X, Y) && !ellipse(27399.861938, 27187.820679, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27913.568000, 26455.799600, 3547.872102, 3547.872102, -0.000000, X, Y) && !ellipse(28263.755371, 26911.761353, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28288.871948, 27342.784119, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(29265.802000, 29107.700000, 7773.360224, 7773.360224, 0.000000, X, Y) && !ellipse(28821.186000, 28598.346000, 3886.680112, 3886.680112, 0.000000, X, Y) && !ellipse(26539.000000, 21872.058000, 1278.232037, 1278.232037, 0.000000, X, Y) && !ellipse(25481.505035, 28485.344116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29828.012000, 27327.404600, 3990.816115, 3990.816115, 0.000000, X, Y) && !ellipse(25444.342590, 28922.465485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33756.148102, 25959.025330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31238.322754, 26834.566376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31179.544000, 27980.268000, 2331.304067, 2331.304067, 0.000000, X, Y) && !ellipse(31955.702000, 28196.458400, 826.008024, 826.008024, 0.000000, X, Y) && !ellipse(27314.885071, 32648.907959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30841.808000, 29178.139260, 2246.256065, 903.664026, 99.853720, X, Y) && !ellipse(32322.694000, 25739.588000, 1425.768041, 1425.768041, 0.000000, X, Y) && !ellipse(25900.503174, 30664.685089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30666.034000, 30843.292000, 2183.248063, 1461.872042, 119.667400, X, Y) && !ellipse(33521.104600, 27947.242000, 478.145614, 478.145614, 0.000000, X, Y) && !ellipse(32572.143097, 28224.941498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31670.898000, 29091.182000, 1505.376043, 740.879221, 290.109000, X, Y) && !ellipse(33415.102000, 25816.292000, 1514.712044, 773.985622, 114.605700, X, Y) && !ellipse(32849.798000, 25592.566000, 3186.496092, 1889.464054, 292.374000, X, Y) && !ellipse(26651.120000, 32274.548000, 1461.864042, 623.417618, 91.041100, X, Y) && !ellipse(27219.795197, 32229.344299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26513.820000, 31493.092000, 1427.728041, 615.436818, 97.579070, X, Y) && !ellipse(33005.369537, 27705.224823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33200.946960, 26226.617767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32180.268738, 30050.218384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34201.338000, 26698.154000, 1551.288045, 460.172013, 86.764180, X, Y) && !ellipse(31295.142000, 30888.550000, 1556.880045, 557.930416, 99.389430, X, Y) && !ellipse(34186.897400, 27702.548553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33605.038000, 27290.822000, 1212.264035, 640.784018, 102.383600, X, Y) && !ellipse(34313.953827, 27330.071838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31838.982000, 30774.428000, 8736.864251, 8736.864251, 0.000000, X, Y) && !ellipse(26080.487610, 31900.532196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32699.308380, 30221.082794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33668.712677, 24380.015686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29870.589722, 31961.276611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33916.586000, 24902.160000, 1593.248046, 1593.248046, 0.000000, X, Y) && !ellipse(31448.164000, 31828.506000, 1586.416046, 463.021613, 95.287420, X, Y) && !ellipse(31238.705078, 31611.757935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28538.370000, 32982.512600, 1841.736053, 1841.736053, 0.000000, X, Y) && !ellipse(27647.960000, 32992.668000, 1487.056043, 338.311210, 94.391480, X, Y) && !ellipse(38660.632385, 24237.668945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24946.966000, 23635.896000, 1157.608033, 1157.608033, 0.000000, X, Y) && !ellipse(34541.922607, 29129.403778, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24528.190000, 25718.270000, 7103.808204, 7103.808204, 0.000000, X, Y) && !ellipse(32169.028600, 31631.119120, 1586.416046, 667.688819, 96.018850, X, Y) && !ellipse(27823.873400, 35482.202200, 640.532818, 384.492811, 3.801954, X, Y) && !ellipse(31176.980957, 32481.468536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34281.400513, 28664.136444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26144.890656, 32410.889893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21753.400000, 26286.302000, 1257.568036, 1257.568036, 0.000000, X, Y) && !ellipse(23046.804000, 24069.450000, 1221.432035, 1221.432035, 0.000000, X, Y) && !ellipse(23343.893158, 24590.347107, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25288.208282, 31696.140076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24865.640000, 24679.404000, 1174.064034, 1174.064034, 0.000000, X, Y) && !ellipse(28767.836578, 34130.594849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32168.856000, 32572.764000, 2043.472059, 441.360813, 92.651320, X, Y) && !ellipse(31279.342000, 32176.292000, 3076.560089, 3076.560089, 0.000000, X, Y) && !ellipse(32969.404000, 23016.622000, 1507.832043, 1157.840033, 103.423100, X, Y) && !ellipse(23106.426000, 30481.132000, 1335.256038, 1335.256038, 0.000000, X, Y) && !ellipse(24277.735600, 31039.022000, 1398.512040, 1398.512040, 0.000000, X, Y) && !ellipse(26949.217400, 33344.063600, 1517.744044, 1090.616031, 93.806000, X, Y) && !ellipse(34291.379600, 24298.654000, 1588.440046, 1588.440046, 0.000000, X, Y)
[Sun May 19 11:47:28 2013] Writing fullrun_mos2_xmm0085110101_pi300-10000_pass1_cl_src11.gif
[Sun May 19 13:29:07 2013] Mean detx,y = (-2828.88, 546.37) 
[Sun May 19 13:29:12 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May 19 13:33:43 2013] Binned source spectrum to 10 counts/bin
[Sun May 19 13:33:44 2013] Setting source spectrum file to fullrun_mos2_xmm0085110101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun May 19 13:33:44 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0085110101_pi300-10000_pass1_cl_src11_bgd.pi.gz