[Wed May  8 02:32:25 2013] Detection parameters:
  Position = (393.8, 298.9) = 3 19 17.75 41 29 34.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 397.4 +/- 45.5
  Background counts = 944.0
  Rate = 0.01 +/- 0.001

[Wed May  8 02:32:36 2013] Off-axis axis estimate = 6.91'
[Thu May  9 08:51:42 2013] Using EEF radius (= 9.88 ")to estimate initial spatial extent for simple fitting
[Thu May  9 08:51:42 2013] Initial guess for spatial extent in simple fitting = 9.88"
[Thu May  9 08:51:42 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.976
[Thu May  9 08:51:42 2013] Giving source the simple spatial ID 72 for pass 0, mean size = 9.88"
[Fri May 10 06:57:17 2013] fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_src72.ximg exists
[Fri May 10 06:57:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_src72.csv
[Fri May 10 06:57:17 2013] fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_src72_1.ximg exists
[Fri May 10 06:57:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_src72.csv
[Fri May 10 06:57:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 06:57:20 2013] fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src72.ximg exists
[Fri May 10 06:57:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src72.csv
[Fri May 10 06:57:20 2013] fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src72_1.ximg exists
[Fri May 10 06:57:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src72.csv
[Fri May 10 06:57:20 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 11:24:14 2013] Spatial fit model total counts = 13684.600000, observed total counts = 8651.000000
[Sat May 11 11:24:14 2013] Poor agreement between spatial fit and data for source 86
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May 11 11:24:14 2013] Warning, spatial fit 72 centroid is now closest to src. 53
[Sat May 11 11:24:14 2013] Vigneting correction estimate = 1.000000
[Sat May 11 11:24:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 11:24:14 2013] Assessing source extent using major
[Sat May 11 11:24:14 2013] Source does appear to be extended
[Sat May 11 11:24:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 12 15:04:00 2013] Using EEF radius (= 9.88 ")to estimate initial spatial extent for simple fitting
[Sun May 12 15:04:00 2013] Initial guess for spatial extent in simple fitting = 9.88"
[Sun May 12 15:04:00 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.976
[Sun May 12 15:04:00 2013] Giving source the simple spatial ID 69 for pass 1, mean size = 9.88"
[Tue May 14 07:34:24 2013] fullrun_mos1_xmm0085110101_pi300-10000_cl_pass1_src69.ximg exists
[Tue May 14 07:34:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085110101_pi300-10000_cl_pass1_src69.csv
[Tue May 14 07:34:24 2013] fullrun_mos1_xmm0085110101_pi300-10000_cl_pass1_src69_1.ximg exists
[Tue May 14 07:34:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085110101_pi300-10000_cl_pass1_src69.csv
[Tue May 14 07:34:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085110101_pi300-10000_cl_pass1_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085110101_pi300-10000_cl_pass1_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 07:34:29 2013] fullrun_mos1_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src69.ximg exists
[Tue May 14 07:34:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src69.csv
[Tue May 14 07:34:29 2013] fullrun_mos1_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src69_1.ximg exists
[Tue May 14 07:34:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src69.csv
[Tue May 14 07:34:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 20:39:51 2013] Spatial fit model total counts = 59218.000000, observed total counts = 59791.000000
[Thu May 16 20:39:51 2013] Offset between fit and detection position for source 86 = 7.330537 pixels
[Thu May 16 20:39:51 2013] Warning, changing simple spatial fit ID from 69 to 33
[Thu May 16 20:39:51 2013] 43022.600000 total counts/ 27369.500000 bgd. counts: snr = 94.616511
Spatial fit parameters:
  Offset between fit and detection position for source 86 = 7.330537 pixels
  Position = (386.5, 300.1) = 3 19 20.56 41 29 43.1
  Extent = 27.4 (27.4-54.8)", rotation angle = 0
  Source counts = 15653.1 +/- 207.4
  Background counts = 27369.5
  Rate = 0.3 +/- 0.004
[Thu May 16 20:39:51 2013] Spatial fit model total counts = 18513.600000, observed total counts = 16222.000000
[Thu May 16 20:39:51 2013] Poor agreement between spatial fit and data for source 86
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 16 20:39:51 2013] Spatial fit model total counts = 24783.600000, observed total counts = 24776.000000
[Thu May 16 20:39:51 2013] Offset between fit and detection position for source 86 = 1.274549 pixels
[Thu May 16 20:39:51 2013] Warning, changing simple spatial fit ID from 33 to 41
[Thu May 16 20:39:51 2013] 24170.398000 total counts/ 23647.300000 bgd. counts: snr = 3.401671
Spatial fit parameters:
  Offset between fit and detection position for source 86 = 1.274549 pixels
  Position = (385.5, 300.9) = 3 19 20.94 41 29 46.7
  Extent = 16.0 (10.8-18.6)", rotation angle = 0
  Source counts = 523.1 +/- 155.5
  Background counts = 23647.3
  Rate = 0.01 +/- 0.003
[Thu May 16 20:39:51 2013] Vigneting correction estimate = 1.000000
[Thu May 16 20:39:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 20:39:51 2013] Assessing source extent using major axis lower bound
[Thu May 16 20:39:51 2013] Source does appear to be extended
[Thu May 16 20:39:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 16 20:39:51 2013] Source is confused with source 58
[Thu May 16 20:39:51 2013] Source is confused with source 54
[Thu May 16 20:39:51 2013] Source is confused with source 53
[Thu May 16 23:21:33 2013] XMMSAS src. selection expression = ellipse(33493.394000, 26127.852000, 958.770028, 958.770028, 0.000000, X, Y)
[Thu May 16 23:21:33 2013] Writing source region out to fullrun_mos1_xmm0085110101_pi300-10000_pass1_cl_src86_src.reg
[Thu May 16 23:21:33 2013] Extracting stamp from image fullrun_mos1_xmm0085110101_pi300-10000_cl_sm2.00.img.gz, (330, 246) - (441, 356)
[Thu May 16 23:21:34 2013] XMMSAS bgd. selection expression = annulus(33493.394000, 26127.852000, 1597.950046, 3195.900092, X, Y) && !ellipse(27151.250000, 27005.398000, 3475.344100, 3475.344100, 0.000000, X, Y) && !ellipse(28053.200600, 29776.168000, 3874.056111, 3874.056111, 0.000000, X, Y) && !ellipse(29653.904000, 28004.068000, 3887.616112, 3887.616112, 0.000000, X, Y) && !ellipse(29347.404000, 29534.910400, 7825.872225, 7825.872225, 0.000000, X, Y) && !ellipse(29176.884000, 28272.938000, 3842.472111, 3842.472111, 0.000000, X, Y) && !ellipse(28729.774000, 28970.410000, 3892.008112, 3892.008112, 0.000000, X, Y) && !ellipse(29197.024000, 30267.376000, 1428.840041, 935.584027, 17.340400, X, Y) && !ellipse(31657.194000, 28041.594000, 1808.512052, 547.544016, 5.342870, X, Y) && !ellipse(31889.199600, 30826.480000, 1551.016045, 1551.016045, 0.000000, X, Y) && !ellipse(34008.301544, 27964.127350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33269.563538, 29418.063873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33494.628000, 27956.432000, 269.548008, 269.548008, 0.000000, X, Y) && !ellipse(31511.050000, 30084.610000, 1467.520042, 918.992026, 6.024810, X, Y) && !ellipse(31605.303558, 24895.157745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32480.464000, 29838.560000, 1503.296043, 670.974419, 8.330760, X, Y) && !ellipse(32298.660000, 28558.156000, 1502.184043, 370.652811, 6.421970, X, Y) && !ellipse(32177.462372, 25314.758575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31710.826000, 29012.238000, 1503.296043, 964.392028, 8.250280, X, Y) && !ellipse(32705.810547, 28003.862518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32196.965800, 29975.766260, 2316.928067, 714.849621, 0.935121, X, Y) && !ellipse(31891.298000, 24795.878000, 1447.952042, 501.273614, 2.984200, X, Y) && !ellipse(33706.528000, 29685.520000, 1582.360046, 1248.168036, 42.454500, X, Y) && !ellipse(24474.560000, 27157.424000, 7175.040206, 7175.040206, 0.000000, X, Y) && !ellipse(32611.052000, 25524.893600, 1447.952042, 743.519221, 7.179340, X, Y) && !ellipse(33839.831970, 25165.822052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33547.617200, 29905.672000, 1599.800046, 530.377615, 10.142000, X, Y) && !ellipse(32742.301270, 26571.628204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33026.134521, 27356.563721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33321.252400, 26096.908000, 1513.576044, 494.363214, 90.000000, X, Y) && !ellipse(33662.546000, 28704.008000, 1036.416030, 1036.416030, 0.000000, X, Y) && !ellipse(33470.756348, 27270.867340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34059.437408, 27266.935242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34395.723419, 26614.788361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32501.020000, 31718.892000, 3102.032089, 2220.824064, 23.964100, X, Y) && !ellipse(32775.038000, 30873.508000, 1583.552046, 1583.552046, 0.000000, X, Y) && !ellipse(34277.518860, 28610.956207, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 16 23:21:34 2013] Writing fullrun_mos1_xmm0085110101_pi300-10000_pass1_cl_src86.gif
[Fri May 17 04:24:58 2013] Mean detx,y = (-158.44, 5927.06) 
[Fri May 17 04:25:02 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 17 04:26:07 2013] Binned source spectrum to 10 counts/bin
[Fri May 17 04:26:08 2013] Setting source spectrum file to fullrun_mos1_xmm0085110101_pi300-10000_pass1_cl_src86_src_b10.pi.gz
[Fri May 17 04:26:08 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0085110101_pi300-10000_pass1_cl_src86_bgd.pi.gz