[Wed May  8 02:32:18 2013] Detection parameters:
  Position = (386.4, 330.0) = 3 19 20.58 41 31 57.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 639.2 +/- 56.7
  Background counts = 1273.5
  Rate = 0.01 +/- 0.001

[Wed May  8 02:32:36 2013] Off-axis axis estimate = 6.78'
[Thu May  9 08:51:42 2013] Using EEF radius (= 9.82 ")to estimate initial spatial extent for simple fitting
[Thu May  9 08:51:42 2013] Initial guess for spatial extent in simple fitting = 9.82"
[Thu May  9 08:51:42 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.987
[Thu May  9 08:51:42 2013] Giving source the simple spatial ID 53 for pass 0, mean size = 9.82"
[Fri May 10 06:57:17 2013] fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_src53.ximg exists
[Fri May 10 06:57:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_src53.csv
[Fri May 10 06:57:17 2013] fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_src53_1.ximg exists
[Fri May 10 06:57:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_src53.csv
[Fri May 10 06:57:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 06:57:19 2013] fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Fri May 10 06:57:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src53.csv
[Fri May 10 06:57:19 2013] fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Fri May 10 06:57:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src53.csv
[Fri May 10 06:57:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 11:24:13 2013] Spatial fit model total counts = 16557.800000, observed total counts = 16748.000000
[Sat May 11 11:24:13 2013] Offset between fit and detection position for source 46 = 1.171995 pixels
[Sat May 11 11:24:13 2013] Warning, changing simple spatial fit ID from 53 to 15
[Sat May 11 11:24:13 2013] 15238.628000 total counts/ 14384.100000 bgd. counts: snr = 7.125001
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 1.171995 pixels
  Position = (387.5, 330.5) = 3 19 20.16 41 31 55.5
  Extent = 13.0 (9.6-15.0)", rotation angle = 0
  Source counts = 854.5 +/- 123.4
  Background counts = 14384.1
  Rate = 0.02 +/- 0.002
[Sat May 11 11:24:14 2013] Vigneting correction estimate = 1.000000
[Sat May 11 11:24:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 11:24:14 2013] Assessing source extent using major axis lower bound
[Sat May 11 11:24:14 2013] Source does appear to be extended
[Sat May 11 11:24:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 11:24:14 2013] Source is confused with source 49
[Sat May 11 11:24:14 2013] Source is confused with source 43
[Sat May 11 11:24:14 2013] Source is confused with source 45
[Sun May 12 15:04:00 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 12 15:04:00 2013] Initial guess for spatial extent in simple fitting = 12.96"
[Sun May 12 15:04:00 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.013
[Sun May 12 15:04:00 2013] Giving source the simple spatial ID 51 for pass 1, mean size = 12.96"
[Tue May 14 07:34:24 2013] fullrun_mos1_xmm0085110101_pi300-10000_cl_pass1_src51.ximg exists
[Tue May 14 07:34:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085110101_pi300-10000_cl_pass1_src51.csv
[Tue May 14 07:34:24 2013] fullrun_mos1_xmm0085110101_pi300-10000_cl_pass1_src51_1.ximg exists
[Tue May 14 07:34:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085110101_pi300-10000_cl_pass1_src51.csv
[Tue May 14 07:34:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085110101_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085110101_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 14 07:34:28 2013] fullrun_mos1_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Tue May 14 07:34:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src51.csv
[Tue May 14 07:34:28 2013] fullrun_mos1_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Tue May 14 07:34:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src51.csv
[Tue May 14 07:34:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 20:39:51 2013] Warning, spatial fit 51 centroid is now closest to src. 7
[Thu May 16 20:39:51 2013] Vigneting correction estimate = 1.000000
[Thu May 16 20:39:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 20:39:51 2013] Assessing source extent using major axis lower bound
[Thu May 16 20:39:51 2013] Source does appear to be extended
[Thu May 16 20:39:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 16 23:21:33 2013] XMMSAS src. selection expression = ellipse(33662.546000, 28704.008000, 777.312022, 777.312022, 0.000000, X, Y)
[Thu May 16 23:21:33 2013] Writing source region out to fullrun_mos1_xmm0085110101_pi300-10000_pass1_cl_src46_src.reg
[Thu May 16 23:21:33 2013] Extracting stamp from image fullrun_mos1_xmm0085110101_pi300-10000_cl_sm2.00.img.gz, (343, 286) - (432, 375)
[Thu May 16 23:21:33 2013] XMMSAS bgd. selection expression = annulus(33662.546000, 28704.008000, 1295.520037, 2591.040075, X, Y) && !ellipse(28053.200600, 29776.168000, 3874.056111, 3874.056111, 0.000000, X, Y) && !ellipse(29653.904000, 28004.068000, 3887.616112, 3887.616112, 0.000000, X, Y) && !ellipse(29347.404000, 29534.910400, 7825.872225, 7825.872225, 0.000000, X, Y) && !ellipse(29176.884000, 28272.938000, 3842.472111, 3842.472111, 0.000000, X, Y) && !ellipse(28729.774000, 28970.410000, 3892.008112, 3892.008112, 0.000000, X, Y) && !ellipse(31657.194000, 28041.594000, 1808.512052, 547.544016, 5.342870, X, Y) && !ellipse(31889.199600, 30826.480000, 1551.016045, 1551.016045, 0.000000, X, Y) && !ellipse(34008.301544, 27964.127350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33269.563538, 29418.063873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33494.628000, 27956.432000, 269.548008, 269.548008, 0.000000, X, Y) && !ellipse(31511.050000, 30084.610000, 1467.520042, 918.992026, 6.024810, X, Y) && !ellipse(32480.464000, 29838.560000, 1503.296043, 670.974419, 8.330760, X, Y) && !ellipse(32298.660000, 28558.156000, 1502.184043, 370.652811, 6.421970, X, Y) && !ellipse(32177.462372, 25314.758575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31710.826000, 29012.238000, 1503.296043, 964.392028, 8.250280, X, Y) && !ellipse(32705.810547, 28003.862518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32196.965800, 29975.766260, 2316.928067, 714.849621, 0.935121, X, Y) && !ellipse(31891.298000, 24795.878000, 1447.952042, 501.273614, 2.984200, X, Y) && !ellipse(33706.528000, 29685.520000, 1582.360046, 1248.168036, 42.454500, X, Y) && !ellipse(24474.560000, 27157.424000, 7175.040206, 7175.040206, 0.000000, X, Y) && !ellipse(32510.145508, 30995.995575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32611.052000, 25524.893600, 1447.952042, 743.519221, 7.179340, X, Y) && !ellipse(33547.617200, 29905.672000, 1599.800046, 530.377615, 10.142000, X, Y) && !ellipse(32742.301270, 26571.628204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33026.134521, 27356.563721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29452.271400, 32158.702000, 2357.072068, 2357.072068, 0.000000, X, Y) && !ellipse(33321.252400, 26096.908000, 1513.576044, 494.363214, 90.000000, X, Y) && !ellipse(31075.131378, 31436.512726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33470.756348, 27270.867340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34059.437408, 27266.935242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30837.962921, 31868.170044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34395.723419, 26614.788361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33493.394000, 26127.852000, 1278.360037, 1278.360037, 0.000000, X, Y) && !ellipse(32501.020000, 31718.892000, 3102.032089, 2220.824064, 23.964100, X, Y) && !ellipse(32775.038000, 30873.508000, 1583.552046, 1583.552046, 0.000000, X, Y) && !ellipse(31439.380157, 32054.239807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31871.135712, 31868.339966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34277.518860, 28610.956207, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 16 23:21:33 2013] Writing fullrun_mos1_xmm0085110101_pi300-10000_pass1_cl_src46.gif
[Fri May 17 03:43:42 2013] Mean detx,y = (2400.42, 5763.21) 
[Fri May 17 03:43:46 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 17 03:44:50 2013] Binned source spectrum to 10 counts/bin
[Fri May 17 03:44:51 2013] Setting source spectrum file to fullrun_mos1_xmm0085110101_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Fri May 17 03:44:51 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0085110101_pi300-10000_pass1_cl_src46_bgd.pi.gz