[Wed May  8 02:32:17 2013] Detection parameters:
  Position = (271.6, 342.7) = 3 20 5.04 41 32 40.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 835.1 +/- 59.3
  Background counts = 1453.6
  Rate = 0.02 +/- 0.002

[Wed May  8 02:32:36 2013] Off-axis axis estimate = 3.75'
[Thu May  9 08:51:42 2013] Using EEF radius (= 8.30 ")to estimate initial spatial extent for simple fitting
[Thu May  9 08:51:42 2013] Initial guess for spatial extent in simple fitting = 8.30"
[Thu May  9 08:51:42 2013] source mask rpix=1.9, npix_max = 23, mask sum = 22, frac = 0.948
[Thu May  9 08:51:42 2013] Giving source the simple spatial ID 40 for pass 0, mean size = 8.30"
[Fri May 10 06:57:16 2013] fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_src40.ximg exists
[Fri May 10 06:57:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_src40.csv
[Fri May 10 06:57:16 2013] fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_src40_1.ximg exists
[Fri May 10 06:57:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_src40.csv
[Fri May 10 06:57:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 06:57:19 2013] fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Fri May 10 06:57:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src40.csv
[Fri May 10 06:57:19 2013] fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Fri May 10 06:57:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src40.csv
[Fri May 10 06:57:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 11:24:14 2013] Warning, spatial fit 40 centroid is now closest to src. 120
[Sat May 11 11:24:14 2013] Vigneting correction estimate = 1.000000
[Sat May 11 11:24:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 11:24:14 2013] Assessing source extent using major
[Sat May 11 11:24:14 2013] Source does appear to be extended
[Sat May 11 11:24:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 11:24:14 2013] Source is confused with source 120
[Sun May 12 15:04:00 2013] Using EEF radius (= 8.30 ")to estimate initial spatial extent for simple fitting
[Sun May 12 15:04:00 2013] Initial guess for spatial extent in simple fitting = 8.30"
[Sun May 12 15:04:00 2013] source mask rpix=1.9, npix_max = 23, mask sum = 22, frac = 0.948
[Sun May 12 15:04:00 2013] Giving source the simple spatial ID 38 for pass 1, mean size = 8.30"
[Tue May 14 07:34:23 2013] fullrun_mos1_xmm0085110101_pi300-10000_cl_pass1_src38.ximg exists
[Tue May 14 07:34:23 2013] fullrun_mos1_xmm0085110101_pi300-10000_cl_pass1_src38_1.ximg exists
[Tue May 14 07:34:23 2013] Fit fullrun_mos1_xmm0085110101_pi300-10000_cl_pass1_src38 appears to have run properly
[Tue May 14 07:34:27 2013] fullrun_mos1_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Tue May 14 07:34:27 2013] fullrun_mos1_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Tue May 14 07:34:27 2013] Fit fullrun_mos1_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src38 appears to have run properly
[Thu May 16 20:39:51 2013] Spatial fit model total counts = 21047.100000, observed total counts = 21115.000000
[Thu May 16 20:39:51 2013] Offset between fit and detection position for source 41 = 6.382697 pixels
[Thu May 16 20:39:51 2013] 19682.524000 total counts/ 18689.500000 bgd. counts: snr = 7.263750
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 6.382697 pixels
  Position = (276.9, 346.3) = 3 20 3.00 41 33 4.5
  Extent = 16.6" x 12.7", rotation angle = 359
  Source counts = 993.0 +/- 140.3
  Background counts = 18689.5
  Rate = 0.02 +/- 0.003
[Thu May 16 20:39:51 2013] Vigneting correction estimate = 1.000000
[Thu May 16 20:39:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 20:39:51 2013] Assessing source extent using major
[Thu May 16 20:39:51 2013] Source does appear to be extended
[Thu May 16 20:39:51 2013] Computing asymmetry using major and minor axis, asym = 1.31
[Thu May 16 23:21:32 2013] XMMSAS src. selection expression = ellipse(24043.308000, 30077.600000, 996.492029, 760.428022, 359.184847, X, Y)
[Thu May 16 23:21:32 2013] Writing source region out to fullrun_mos1_xmm0085110101_pi300-10000_pass1_cl_src41_src.reg
[Thu May 16 23:21:32 2013] Extracting stamp from image fullrun_mos1_xmm0085110101_pi300-10000_cl_sm2.00.img.gz, (220, 289) - (334, 404)
[Thu May 16 23:21:32 2013] XMMSAS bgd. selection expression = annulus(24043.308000, 30077.600000, 1660.820048, 3321.640096, X, Y) && !ellipse(27390.853424, 27187.714478, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27151.250000, 27005.398000, 3475.344100, 3475.344100, 0.000000, X, Y) && !ellipse(28053.200600, 29776.168000, 3874.056111, 3874.056111, 0.000000, X, Y) && !ellipse(29653.904000, 28004.068000, 3887.616112, 3887.616112, 0.000000, X, Y) && !ellipse(29347.404000, 29534.910400, 7825.872225, 7825.872225, 0.000000, X, Y) && !ellipse(29176.884000, 28272.938000, 3842.472111, 3842.472111, 0.000000, X, Y) && !ellipse(28729.774000, 28970.410000, 3892.008112, 3892.008112, 0.000000, X, Y) && !ellipse(27644.399200, 31395.770000, 1428.560041, 1237.688036, 23.272000, X, Y) && !ellipse(26283.984985, 31383.619232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23604.739400, 31822.034000, 2076.848060, 312.439209, 4.670740, X, Y) && !ellipse(26347.540000, 31818.925600, 1420.680041, 1420.680041, 0.000000, X, Y) && !ellipse(25732.406000, 30933.078000, 1401.720040, 561.060016, 3.419230, X, Y) && !ellipse(24474.560000, 27157.424000, 7175.040206, 7175.040206, 0.000000, X, Y) && !ellipse(24582.676727, 31684.072968, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28602.846000, 31356.968000, 1487.768043, 1487.768043, 0.000000, X, Y) && !ellipse(25115.756000, 31571.558000, 1273.824037, 283.495208, 0.000000, X, Y) && !ellipse(24273.046000, 31780.456000, 1396.768040, 409.156012, 4.085630, X, Y) && !ellipse(23131.278000, 28792.660000, 1331.336038, 1331.336038, 0.000000, X, Y) && !ellipse(29452.271400, 32158.702000, 2357.072068, 2357.072068, 0.000000, X, Y) && !ellipse(22697.080231, 26393.435913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23983.592000, 31057.392000, 4130.328119, 4130.328119, 0.000000, X, Y) && !ellipse(22695.594000, 25524.618000, 1294.344037, 1294.344037, 0.000000, X, Y) && !ellipse(27871.780121, 32572.092651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21511.960000, 27200.684000, 1294.152037, 1294.152037, 0.000000, X, Y) && !ellipse(23741.704000, 25222.540000, 3617.952104, 3617.952104, 0.000000, X, Y) && !ellipse(28291.035000, 33277.273400, 1528.184044, 1528.184044, 0.000000, X, Y) && !ellipse(24815.830000, 32126.238000, 1423.272041, 1423.272041, 0.000000, X, Y) && !ellipse(23573.436371, 30584.043884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25837.945374, 32484.158081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27535.711823, 33082.800812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25026.515320, 32569.591614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25353.353600, 33707.515600, 1531.648044, 793.587223, 13.223600, X, Y) && !ellipse(23163.316000, 30131.349000, 1377.184040, 1377.184040, 0.000000, X, Y)
[Thu May 16 23:21:32 2013] Writing fullrun_mos1_xmm0085110101_pi300-10000_pass1_cl_src41.gif
[Fri May 17 02:59:47 2013] Mean detx,y = (2433.76, -3712.81) 
[Fri May 17 02:59:51 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 17 03:00:40 2013] Binned source spectrum to 10 counts/bin
[Fri May 17 03:00:40 2013] Setting source spectrum file to fullrun_mos1_xmm0085110101_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Fri May 17 03:00:40 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0085110101_pi300-10000_pass1_cl_src41_bgd.pi.gz