[Wed May  8 02:32:14 2013] Detection parameters:
  Position = (283.1, 364.7) = 3 20 0.60 41 34 15.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 867.4 +/- 56.7
  Background counts = 1133.6
  Rate = 0.03 +/- 0.002

[Wed May  8 02:32:36 2013] Off-axis axis estimate = 4.93'
[Thu May  9 08:51:42 2013] Using EEF radius (= 8.90 ")to estimate initial spatial extent for simple fitting
[Thu May  9 08:51:42 2013] Initial guess for spatial extent in simple fitting = 8.90"
[Thu May  9 08:51:42 2013] source mask rpix=2.0, npix_max = 25, mask sum = 21, frac = 0.811
[Thu May  9 08:51:42 2013] Giving source the simple spatial ID 34 for pass 0, mean size = 8.90"
[Fri May 10 06:57:16 2013] fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_src34.ximg exists
[Fri May 10 06:57:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_src34.csv
[Fri May 10 06:57:16 2013] fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_src34_1.ximg exists
[Fri May 10 06:57:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_src34.csv
[Fri May 10 06:57:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 06:57:19 2013] fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Fri May 10 06:57:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src34.csv
[Fri May 10 06:57:19 2013] fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Fri May 10 06:57:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src34.csv
[Fri May 10 06:57:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 11:24:14 2013] Warning, spatial fit 34 centroid is now closest to src. 30
[Sat May 11 11:24:14 2013] Source 26 is offset by -4.202819 and -1.779966 pixels which is larger than
2 X fitted extent = 5.530345 x 1.233959, not incorporating fit results
[Sat May 11 11:24:14 2013] Vigneting correction estimate = 1.000000
[Sat May 11 11:24:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 11 11:24:14 2013] Assessing source extent using major
[Sat May 11 11:24:14 2013] Source does appear to be extended
[Sat May 11 11:24:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 11 11:24:14 2013] Source is confused with source 25
[Sat May 11 11:24:14 2013] Source is confused with source 32
[Sun May 12 15:04:00 2013] Using EEF radius (= 8.90 ")to estimate initial spatial extent for simple fitting
[Sun May 12 15:04:00 2013] Initial guess for spatial extent in simple fitting = 8.90"
[Sun May 12 15:04:00 2013] source mask rpix=2.0, npix_max = 25, mask sum = 21, frac = 0.811
[Sun May 12 15:04:00 2013] Giving source the simple spatial ID 32 for pass 1, mean size = 8.90"
[Tue May 14 07:34:23 2013] fullrun_mos1_xmm0085110101_pi300-10000_cl_pass1_src32.ximg exists
[Tue May 14 07:34:23 2013] fullrun_mos1_xmm0085110101_pi300-10000_cl_pass1_src32_1.ximg exists
[Tue May 14 07:34:23 2013] Fit fullrun_mos1_xmm0085110101_pi300-10000_cl_pass1_src32 appears to have run properly
[Tue May 14 07:34:26 2013] fullrun_mos1_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Tue May 14 07:34:26 2013] fullrun_mos1_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Tue May 14 07:34:27 2013] Fit fullrun_mos1_xmm0085110101_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly
[Thu May 16 20:39:51 2013] Warning, spatial fit 32 centroid is now closest to src. 109
[Thu May 16 20:39:51 2013] Vigneting correction estimate = 1.000000
[Thu May 16 20:39:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 20:39:51 2013] Assessing source extent using major
[Thu May 16 20:39:51 2013] Source does appear to be extended
[Thu May 16 20:39:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 16 23:21:31 2013] XMMSAS src. selection expression = ellipse(24582.676727, 31684.072968, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 16 23:21:31 2013] Writing source region out to fullrun_mos1_xmm0085110101_pi300-10000_pass1_cl_src26_src.reg
[Thu May 16 23:21:31 2013] Extracting stamp from image fullrun_mos1_xmm0085110101_pi300-10000_cl_sm2.00.img.gz, (246, 327) - (321, 402)
[Thu May 16 23:21:31 2013] XMMSAS bgd. selection expression = annulus(24582.676727, 31684.072968, 1087.500000, 2175.000000, X, Y) && !ellipse(27390.853424, 27187.714478, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27151.250000, 27005.398000, 3475.344100, 3475.344100, 0.000000, X, Y) && !ellipse(28053.200600, 29776.168000, 3874.056111, 3874.056111, 0.000000, X, Y) && !ellipse(29653.904000, 28004.068000, 3887.616112, 3887.616112, 0.000000, X, Y) && !ellipse(29347.404000, 29534.910400, 7825.872225, 7825.872225, 0.000000, X, Y) && !ellipse(29176.884000, 28272.938000, 3842.472111, 3842.472111, 0.000000, X, Y) && !ellipse(28729.774000, 28970.410000, 3892.008112, 3892.008112, 0.000000, X, Y) && !ellipse(27644.399200, 31395.770000, 1428.560041, 1237.688036, 23.272000, X, Y) && !ellipse(26283.984985, 31383.619232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23604.739400, 31822.034000, 2076.848060, 312.439209, 4.670740, X, Y) && !ellipse(26347.540000, 31818.925600, 1420.680041, 1420.680041, 0.000000, X, Y) && !ellipse(25732.406000, 30933.078000, 1401.720040, 561.060016, 3.419230, X, Y) && !ellipse(24474.560000, 27157.424000, 7175.040206, 7175.040206, 0.000000, X, Y) && !ellipse(25115.756000, 31571.558000, 1273.824037, 283.495208, 0.000000, X, Y) && !ellipse(24043.308000, 30077.600000, 1328.656038, 1013.904029, 359.184847, X, Y) && !ellipse(24273.046000, 31780.456000, 1396.768040, 409.156012, 4.085630, X, Y) && !ellipse(23131.278000, 28792.660000, 1331.336038, 1331.336038, 0.000000, X, Y) && !ellipse(23921.364685, 34593.539032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23983.592000, 31057.392000, 4130.328119, 4130.328119, 0.000000, X, Y) && !ellipse(24798.445648, 34528.158936, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24815.830000, 32126.238000, 1423.272041, 1423.272041, 0.000000, X, Y) && !ellipse(23573.436371, 30584.043884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25837.945374, 32484.158081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27535.711823, 33082.800812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25026.515320, 32569.591614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25353.353600, 33707.515600, 1531.648044, 793.587223, 13.223600, X, Y) && !ellipse(23163.316000, 30131.349000, 1377.184040, 1377.184040, 0.000000, X, Y)
[Thu May 16 23:21:31 2013] Writing fullrun_mos1_xmm0085110101_pi300-10000_pass1_cl_src26.gif
[Fri May 17 02:48:22 2013] Mean detx,y = (4112.19, -3483.96) 
[Fri May 17 02:48:25 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 17 02:48:45 2013] Binned source spectrum to 10 counts/bin
[Fri May 17 02:48:46 2013] Setting source spectrum file to fullrun_mos1_xmm0085110101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Fri May 17 02:48:46 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0085110101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Sun May 19 09:52:21 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 19 09:52:21 2013] rmf not generated due to insufficient counts