[Wed May  8 02:32:12 2013] Detection parameters:
  Position = (341.9, 369.9) = 3 19 37.80 41 34 47.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 628.9 +/- 58.9
  Background counts = 1306.4
  Rate = 0.01 +/- 0.001

[Wed May  8 02:32:36 2013] Off-axis axis estimate = 6.06'
[Thu May  9 08:51:42 2013] Using EEF radius (= 9.46 ")to estimate initial spatial extent for simple fitting
[Thu May  9 08:51:42 2013] Initial guess for spatial extent in simple fitting = 9.46"
[Thu May  9 08:51:42 2013] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.258
[Thu May  9 08:51:42 2013] Giving source the simple spatial ID 55 for pass 0, mean size = 9.46"
[Fri May 10 06:57:17 2013] fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_src55.ximg exists
[Fri May 10 06:57:17 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_src55.csv
[Fri May 10 06:57:17 2013] fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_src55_1.ximg exists
[Fri May 10 06:57:17 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_src55.csv
[Fri May 10 06:57:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 06:57:19 2013] fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Fri May 10 06:57:19 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src55.csv
[Fri May 10 06:57:19 2013] fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Fri May 10 06:57:19 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src55.csv
[Fri May 10 06:57:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0085110101_pi300-10000_cl_pass0_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 11 11:24:14 2013] Source 20 is offset by 2.420368 and 0.200285 pixels which is larger than
2 X fitted extent = 1.185058 x 1.185058, not incorporating fit results
[Sat May 11 11:24:14 2013] Spatial fit model total counts = 15068.500000, observed total counts = 14768.000000
[Sat May 11 11:24:14 2013] Offset between fit and detection position for source 20 = 2.872580 pixels
[Sat May 11 11:24:14 2013] Warning, changing simple spatial fit ID from 55 to 65
[Sat May 11 11:24:14 2013] 14722.993000 total counts/ 14582.200000 bgd. counts: snr = 1.165922
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 2.872580 pixels
  Position = (339.1, 370.5) = 3 19 38.89 41 34 49.6
  Extent = 19.1 (18.2-19.4)" x 3.7 (2.4-16.4)", rotation angle = 0 (360-0) degrees
  Source counts = 140.8 +/- 121.3
  Background counts = 14582.2
  Rate = 0.003 +/- 0.002
  Deleting source due to low Poisson probability