[Tue Mar 13 12:16:19 2012] Detection parameters:
  Position = (486.2, 246.1) = 1 33 45.65 -41 29 43.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 141.2 +/- 30.0
  Background counts = 280.2
  Rate = 0.009 +/- 0.002

[Tue Mar 13 12:16:23 2012] Off-axis axis estimate = 14.13'
[Tue Mar 13 12:17:07 2012] Using EEF radius (= 13.50 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 12:17:07 2012] Initial guess for spatial extent in simple fitting = 13.50"
[Tue Mar 13 12:17:07 2012] source mask rpix=3.1, npix_max = 51, mask sum = 45, frac = 0.867
[Tue Mar 13 12:17:07 2012] Giving source the simple spatial ID 46 for pass 0, mean size = 13.50"
[Tue Mar 13 12:17:09 2012] fullrun_pn_xmm0085100101_pi300-10000_cl_pass0_src46.ximg exists
[Tue Mar 13 12:17:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085100101_pi300-10000_cl_pass0_src46.csv
[Tue Mar 13 12:17:09 2012] fullrun_pn_xmm0085100101_pi300-10000_cl_pass0_src46_1.ximg exists
[Tue Mar 13 12:17:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085100101_pi300-10000_cl_pass0_src46.csv
[Tue Mar 13 12:17:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085100101_pi300-10000_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085100101_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 12:17:11 2012] fullrun_pn_xmm0085100101_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Tue Mar 13 12:17:11 2012] fullrun_pn_xmm0085100101_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Tue Mar 13 12:17:11 2012] Fit fullrun_pn_xmm0085100101_pi300-10000_cl_pass0_tfrozen_src46 appears to have run properly
[Tue Mar 13 12:17:50 2012] Warning, spatial fit 46 centroid is now closest to src. 19
[Tue Mar 13 12:17:50 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 12:17:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 12:17:50 2012] Assessing source extent using major
[Tue Mar 13 12:17:50 2012] Source does appear to be extended
[Tue Mar 13 12:17:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 12:17:50 2012] Source is confused with source 20
[Tue Mar 13 12:18:19 2012] Using EEF radius (= 13.50 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 12:18:19 2012] Initial guess for spatial extent in simple fitting = 13.50"
[Tue Mar 13 12:18:19 2012] source mask rpix=3.1, npix_max = 51, mask sum = 45, frac = 0.867
[Tue Mar 13 12:18:19 2012] Giving source the simple spatial ID 44 for pass 1, mean size = 13.50"
[Tue Mar 13 12:18:25 2012] fullrun_pn_xmm0085100101_pi300-10000_cl_pass1_src44.ximg exists
[Tue Mar 13 12:18:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085100101_pi300-10000_cl_pass1_src44.csv
[Tue Mar 13 12:18:25 2012] fullrun_pn_xmm0085100101_pi300-10000_cl_pass1_src44_1.ximg exists
[Tue Mar 13 12:18:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085100101_pi300-10000_cl_pass1_src44.csv
[Tue Mar 13 12:18:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085100101_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085100101_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 12:18:30 2012] fullrun_pn_xmm0085100101_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Tue Mar 13 12:18:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085100101_pi300-10000_cl_pass1_tfrozen_src44.csv
[Tue Mar 13 12:18:30 2012] fullrun_pn_xmm0085100101_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Tue Mar 13 12:18:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085100101_pi300-10000_cl_pass1_tfrozen_src44.csv
[Tue Mar 13 12:18:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085100101_pi300-10000_cl_pass1_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085100101_pi300-10000_cl_pass1_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 12:19:01 2012] Warning, spatial fit 44 centroid is now closest to src. 50
[Tue Mar 13 12:19:01 2012] Source 51 is offset by 6.663868 and 1.846177 pixels which is larger than
2 X fitted extent = 1.483306 x 1.483306, not incorporating fit results
[Tue Mar 13 12:19:01 2012] Warning: source 46 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 51 at 10.598521 pixels away
[Tue Mar 13 12:19:01 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 12:19:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 12:19:01 2012] Assessing source extent using major
[Tue Mar 13 12:19:01 2012] Source does appear to be extended
[Tue Mar 13 12:19:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 12:19:30 2012] XMMSAS src. selection expression = ellipse(42252.860474, 21362.661179, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Mar 13 12:19:30 2012] Not overwriting source region fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src51_src.reg
[Tue Mar 13 12:19:30 2012] Extracting stamp from image fullrun_pn_xmm0085100101_pi300-10000_cl_sm2.00.img.gz, (449, 209) - (524, 284)
[Tue Mar 13 12:19:31 2012] XMMSAS bgd. selection expression = annulus(42252.860474, 21362.661179, 1087.500000, 2175.000000, X, Y) && !ellipse(41625.296509, 23376.297791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42469.968000, 23889.906000, 573.216816, 573.216816, 0.000000, X, Y) && !ellipse(42356.428400, 23460.948000, 2131.968061, 2131.968061, 0.000000, X, Y) && !ellipse(42296.600000, 23297.488000, 2112.328061, 2112.328061, 0.000000, X, Y) && !ellipse(41779.118400, 22396.758000, 2089.480060, 2089.480060, 0.000000, X, Y) && !ellipse(42315.917400, 22255.276800, 1623.936047, 1623.936047, 0.000000, X, Y) && !ellipse(42225.001251, 20822.022873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40900.346069, 20230.810242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41256.202301, 19950.936966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41026.978000, 24461.818000, 2087.856060, 2087.856060, 0.000000, X, Y) && !ellipse(41337.358582, 23889.852142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40977.141200, 22201.012000, 2082.504060, 2082.504060, 0.000000, X, Y) && !ellipse(40714.955994, 21184.539246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41329.020000, 21121.356000, 4160.376120, 4160.376120, 0.000000, X, Y) && !ellipse(41489.596580, 18757.926000, 2115.208061, 2115.208061, 0.000000, X, Y) && !ellipse(41525.515198, 19261.818802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40886.882400, 17393.952000, 2791.112080, 2791.112080, 0.000000, X, Y)
[Tue Mar 13 12:19:31 2012] Writing fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src51.gif
[Tue Mar 13 12:19:36 2012] ../../xmm0085100101/products/events/fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src51_src.evt and ../../xmm0085100101/products/events/fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src51_bgd.evt exist, delete to re-create
[Tue Mar 13 12:19:36 2012] Mean detx,y = (-15027.12, 10806.21) 
[Tue Mar 13 12:19:36 2012] ../../xmm0085100101/products/images/fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src51_src.img and ../../xmm0085100101/products/images/fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src51_bgd.img exist, delete to re-create
[Tue Mar 13 12:19:36 2012] ../../xmm0085100101/products/spectra/fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src51_src_b10.pi.gz and ../../xmm0085100101/products/spectra/fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src51_bgd.pi exist, delete to re-create
[Tue Mar 13 12:19:36 2012] Setting source spectrum file to fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Tue Mar 13 12:19:36 2012] Setting bgd. spectrum file to fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src51_bgd.pi.gz
[Tue Mar 13 12:19:36 2012] ../../xmm0085100101/products/lightcurves/fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src51_src.lc and ../../xmm0085100101/products/lightcurves/fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src51_bgd.lc exist, delete to re-create
[Tue Mar 13 12:19:56 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Mar 13 12:19:56 2012] rmf not generated due to insufficient counts
[Tue Mar 13 12:19:56 2012] fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src51.arf exists, delete to re-create
[Tue Mar 13 12:21:04 2012] Updating aperture counts using extracted products
[Tue Mar 13 12:21:04 2012] Error reading totcts from fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Tue Mar 13 12:21:08 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 12:21:08 2012] Using photon index=1.80, rate=0.00898, arf fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src51.arf
[Tue Mar 13 12:21:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 12:21:08 2012] Updating source flux to 9.2e-14
[Tue Mar 13 12:21:19 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting