[Tue Mar 13 12:16:18 2012] Detection parameters:
  Position = (486.1, 302.9) = 1 33 45.76 -41 25 30.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 153.9 +/- 25.6
  Background counts = 256.4
  Rate = 0.01 +/- 0.002

[Tue Mar 13 12:16:23 2012] Off-axis axis estimate = 13.61'
[Tue Mar 13 12:17:07 2012] Using EEF radius (= 13.24 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 12:17:07 2012] Initial guess for spatial extent in simple fitting = 13.24"
[Tue Mar 13 12:17:07 2012] source mask rpix=3.0, npix_max = 50, mask sum = 48, frac = 0.956
[Tue Mar 13 12:17:07 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 13.24"
[Tue Mar 13 12:17:09 2012] fullrun_pn_xmm0085100101_pi300-10000_cl_pass0_src35.ximg exists
[Tue Mar 13 12:17:09 2012] fullrun_pn_xmm0085100101_pi300-10000_cl_pass0_src35_1.ximg exists
[Tue Mar 13 12:17:09 2012] Fit fullrun_pn_xmm0085100101_pi300-10000_cl_pass0_src35 appears to have run properly
[Tue Mar 13 12:17:11 2012] fullrun_pn_xmm0085100101_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Tue Mar 13 12:17:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085100101_pi300-10000_cl_pass0_tfrozen_src35.csv
[Tue Mar 13 12:17:11 2012] fullrun_pn_xmm0085100101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Tue Mar 13 12:17:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085100101_pi300-10000_cl_pass0_tfrozen_src35.csv
[Tue Mar 13 12:17:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085100101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085100101_pi300-10000_cl_pass0_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 12:17:49 2012] Spatial fit model total counts = 1460.690000, observed total counts = 1582.000000
[Tue Mar 13 12:17:49 2012] Offset between fit and detection position for source 40 = 2.096786 pixels
[Tue Mar 13 12:17:49 2012] 1521.885000 total counts/ 1213.860000 bgd. counts: snr = 8.841006
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 2.096786 pixels
  Position = (486.1, 300.8) = 1 33 45.77 -41 25 46.0
  Extent = 14.4" x 14.4", rotation angle = 0
  Source counts = 308.0 +/- 39.0
  Background counts = 1213.9
  Rate = 0.07 +/- 0.008
[Tue Mar 13 12:17:50 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 12:17:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 12:17:50 2012] Assessing source extent using major
[Tue Mar 13 12:17:50 2012] Source does appear to be extended
[Tue Mar 13 12:17:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 12:17:50 2012] Source is confused with source 12
[Tue Mar 13 12:18:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 12:18:19 2012] Initial guess for spatial extent in simple fitting = 14.44"
[Tue Mar 13 12:18:19 2012] source mask rpix=3.3, npix_max = 58, mask sum = 64, frac = 1.097
[Tue Mar 13 12:18:19 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 14.44"
[Tue Mar 13 12:18:24 2012] fullrun_pn_xmm0085100101_pi300-10000_cl_pass1_src33.ximg exists
[Tue Mar 13 12:18:24 2012] fullrun_pn_xmm0085100101_pi300-10000_cl_pass1_src33_1.ximg exists
[Tue Mar 13 12:18:24 2012] Fit fullrun_pn_xmm0085100101_pi300-10000_cl_pass1_src33 appears to have run properly
[Tue Mar 13 12:18:30 2012] fullrun_pn_xmm0085100101_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Tue Mar 13 12:18:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085100101_pi300-10000_cl_pass1_tfrozen_src33.csv
[Tue Mar 13 12:18:30 2012] fullrun_pn_xmm0085100101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Tue Mar 13 12:18:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085100101_pi300-10000_cl_pass1_tfrozen_src33.csv
[Tue Mar 13 12:18:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085100101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085100101_pi300-10000_cl_pass1_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 12:19:01 2012] Spatial fit model total counts = 1785.300000, observed total counts = 1862.000000
[Tue Mar 13 12:19:01 2012] Offset between fit and detection position for source 40 = 0.829018 pixels
[Tue Mar 13 12:19:01 2012] Warning, changing simple spatial fit ID from 33 to 7
[Tue Mar 13 12:19:01 2012] 1629.114000 total counts/ 795.544000 bgd. counts: snr = 29.553572
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.829018 pixels
  Position = (486.0, 301.6) = 1 33 45.81 -41 25 42.4
  Extent = 23.4 (22.7-24.0)", rotation angle = 0
  Source counts = 833.6 +/- 40.4
  Background counts = 795.5
  Rate = 0.2 +/- 0.009
[Tue Mar 13 12:19:01 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 12:19:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 12:19:01 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 12:19:01 2012] Source does appear to be extended
[Tue Mar 13 12:19:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 12:19:30 2012] XMMSAS src. selection expression = ellipse(42235.416000, 26190.792000, 1403.130040, 1403.130040, 0.000000, X, Y)
[Tue Mar 13 12:19:30 2012] Not overwriting source region fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src40_src.reg
[Tue Mar 13 12:19:30 2012] Extracting stamp from image fullrun_pn_xmm0085100101_pi300-10000_cl_sm2.00.img.gz, (405, 221) - (567, 382)
[Tue Mar 13 12:19:30 2012] XMMSAS bgd. selection expression = annulus(42235.416000, 26190.792000, 2338.550067, 4677.100135, X, Y) && !ellipse(41625.296509, 23376.297791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40323.908000, 28816.800000, 928.024027, 928.024027, 0.000000, X, Y) && !ellipse(41420.434000, 27433.312000, 2008.448058, 2008.448058, 0.000000, X, Y) && !ellipse(41811.262726, 26664.862213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42339.725067, 25790.709747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42193.257920, 25020.389000, 1346.408039, 1346.408039, 0.000000, X, Y) && !ellipse(42011.162537, 24420.109283, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42469.968000, 23889.906000, 573.216816, 573.216816, 0.000000, X, Y) && !ellipse(42356.428400, 23460.948000, 2131.968061, 2131.968061, 0.000000, X, Y) && !ellipse(42296.600000, 23297.488000, 2112.328061, 2112.328061, 0.000000, X, Y) && !ellipse(41779.118400, 22396.758000, 2089.480060, 2089.480060, 0.000000, X, Y) && !ellipse(42315.917400, 22255.276800, 1623.936047, 1623.936047, 0.000000, X, Y) && !ellipse(42225.001251, 20822.022873, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41000.254200, 27757.064600, 2125.344061, 769.684822, 47.335400, X, Y) && !ellipse(41160.586731, 25444.711639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41026.978000, 24461.818000, 2087.856060, 2087.856060, 0.000000, X, Y) && !ellipse(41337.358582, 23889.852142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40977.141200, 22201.012000, 2082.504060, 2082.504060, 0.000000, X, Y) && !ellipse(42252.860474, 21362.661179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40714.955994, 21184.539246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41329.020000, 21121.356000, 4160.376120, 4160.376120, 0.000000, X, Y)
[Tue Mar 13 12:19:30 2012] Writing fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src40.gif
[Tue Mar 13 12:19:35 2012] ../../xmm0085100101/products/events/fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src40_src.evt and ../../xmm0085100101/products/events/fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src40_bgd.evt exist, delete to re-create
[Tue Mar 13 12:19:35 2012] Mean detx,y = (-11286.47, 13525.45) 
[Tue Mar 13 12:19:35 2012] ../../xmm0085100101/products/images/fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src40_src.img and ../../xmm0085100101/products/images/fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src40_bgd.img exist, delete to re-create
[Tue Mar 13 12:19:35 2012] ../../xmm0085100101/products/spectra/fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src40_src_b10.pi.gz and ../../xmm0085100101/products/spectra/fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src40_bgd.pi exist, delete to re-create
[Tue Mar 13 12:19:35 2012] Setting source spectrum file to fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Tue Mar 13 12:19:35 2012] Setting bgd. spectrum file to fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Tue Mar 13 12:19:35 2012] ../../xmm0085100101/products/lightcurves/fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src40_src.lc and ../../xmm0085100101/products/lightcurves/fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src40_bgd.lc exist, delete to re-create
[Tue Mar 13 12:19:56 2012] fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src40.rmf exists, delete to re-create
[Tue Mar 13 12:19:56 2012] fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src40.arf exists, delete to re-create
[Tue Mar 13 12:21:03 2012] Updating aperture counts using extracted products
[Tue Mar 13 12:21:03 2012] Error reading totcts from fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Tue Mar 13 12:21:08 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 12:21:08 2012] Using photon index=1.80, rate=0.18, arf fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src40.arf
[Tue Mar 13 12:21:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 12:21:08 2012] Updating source flux to 1.6e-12
[Tue Mar 13 12:21:18 2012] Flag c found in src. 40 procflags, skipping spectral fitting