[Tue Mar 13 12:16:15 2012] Detection parameters:
  Position = (485.9, 239.9) = 1 33 45.77 -41 30 11.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 233.6 +/- 31.2
  Background counts = 285.2
  Rate = 0.01 +/- 0.002

[Tue Mar 13 12:16:23 2012] Off-axis axis estimate = 14.24'
[Tue Mar 13 12:17:07 2012] Using EEF radius (= 13.55 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 12:17:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 13 12:17:07 2012] Initial guess for spatial extent in simple fitting = 13.55"
[Tue Mar 13 12:17:07 2012] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.072
[Tue Mar 13 12:17:07 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 13.55"
[Tue Mar 13 12:17:08 2012] fullrun_pn_xmm0085100101_pi300-10000_cl_pass0_src17.ximg exists
[Tue Mar 13 12:17:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085100101_pi300-10000_cl_pass0_src17.csv
[Tue Mar 13 12:17:08 2012] fullrun_pn_xmm0085100101_pi300-10000_cl_pass0_src17_1.ximg exists
[Tue Mar 13 12:17:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085100101_pi300-10000_cl_pass0_src17.csv
[Tue Mar 13 12:17:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085100101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085100101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 12:17:10 2012] fullrun_pn_xmm0085100101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Tue Mar 13 12:17:10 2012] fullrun_pn_xmm0085100101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Tue Mar 13 12:17:10 2012] Fit fullrun_pn_xmm0085100101_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Tue Mar 13 12:17:49 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 16.903503 pixels away
[Tue Mar 13 12:17:50 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 12:17:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 12:17:50 2012] Assessing source extent using major
[Tue Mar 13 12:17:50 2012] Source does appear to be extended
[Tue Mar 13 12:17:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 12:17:50 2012] Source is confused with source 51
[Tue Mar 13 12:18:19 2012] Using EEF radius (= 13.55 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 12:18:19 2012] Initial guess for spatial extent in simple fitting = 13.55"
[Tue Mar 13 12:18:19 2012] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.072
[Tue Mar 13 12:18:19 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 13.55"
[Tue Mar 13 12:18:21 2012] fullrun_pn_xmm0085100101_pi300-10000_cl_pass1_src16.ximg exists
[Tue Mar 13 12:18:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085100101_pi300-10000_cl_pass1_src16.csv
[Tue Mar 13 12:18:21 2012] fullrun_pn_xmm0085100101_pi300-10000_cl_pass1_src16_1.ximg exists
[Tue Mar 13 12:18:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0085100101_pi300-10000_cl_pass1_src16.csv
[Tue Mar 13 12:18:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0085100101_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0085100101_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 12:18:27 2012] fullrun_pn_xmm0085100101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Tue Mar 13 12:18:27 2012] fullrun_pn_xmm0085100101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Tue Mar 13 12:18:27 2012] Fit fullrun_pn_xmm0085100101_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Tue Mar 13 12:19:01 2012] Warning, spatial fit 16 centroid is now closest to src. 55
[Tue Mar 13 12:19:01 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 12:19:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 12:19:01 2012] Assessing source extent using major
[Tue Mar 13 12:19:01 2012] Source does appear to be extended
[Tue Mar 13 12:19:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 12:19:28 2012] XMMSAS src. selection expression = ellipse(42225.001251, 20822.022873, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Mar 13 12:19:28 2012] Not overwriting source region fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src20_src.reg
[Tue Mar 13 12:19:28 2012] Extracting stamp from image fullrun_pn_xmm0085100101_pi300-10000_cl_sm2.00.img.gz, (448, 202) - (523, 277)
[Tue Mar 13 12:19:28 2012] XMMSAS bgd. selection expression = annulus(42225.001251, 20822.022873, 1087.500000, 2175.000000, X, Y) && !ellipse(41625.296509, 23376.297791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42356.428400, 23460.948000, 2131.968061, 2131.968061, 0.000000, X, Y) && !ellipse(42296.600000, 23297.488000, 2112.328061, 2112.328061, 0.000000, X, Y) && !ellipse(41779.118400, 22396.758000, 2089.480060, 2089.480060, 0.000000, X, Y) && !ellipse(42315.917400, 22255.276800, 1623.936047, 1623.936047, 0.000000, X, Y) && !ellipse(40900.346069, 20230.810242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41256.202301, 19950.936966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41846.792328, 18306.985306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41026.978000, 24461.818000, 2087.856060, 2087.856060, 0.000000, X, Y) && !ellipse(40977.141200, 22201.012000, 2082.504060, 2082.504060, 0.000000, X, Y) && !ellipse(42252.860474, 21362.661179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40714.955994, 21184.539246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41329.020000, 21121.356000, 4160.376120, 4160.376120, 0.000000, X, Y) && !ellipse(41489.596580, 18757.926000, 2115.208061, 2115.208061, 0.000000, X, Y) && !ellipse(41525.515198, 19261.818802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40886.882400, 17393.952000, 2791.112080, 2791.112080, 0.000000, X, Y)
[Tue Mar 13 12:19:28 2012] Writing fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src20.gif
[Tue Mar 13 12:19:34 2012] ../../xmm0085100101/products/events/fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src20_src.evt and ../../xmm0085100101/products/events/fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src20_bgd.evt exist, delete to re-create
[Tue Mar 13 12:19:34 2012] Mean detx,y = (-15403.11, 10433.74) 
[Tue Mar 13 12:19:34 2012] ../../xmm0085100101/products/images/fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src20_src.img and ../../xmm0085100101/products/images/fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src20_bgd.img exist, delete to re-create
[Tue Mar 13 12:19:34 2012] ../../xmm0085100101/products/spectra/fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src20_src_b10.pi.gz and ../../xmm0085100101/products/spectra/fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src20_bgd.pi exist, delete to re-create
[Tue Mar 13 12:19:34 2012] Setting source spectrum file to fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Tue Mar 13 12:19:34 2012] Setting bgd. spectrum file to fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Tue Mar 13 12:19:34 2012] ../../xmm0085100101/products/lightcurves/fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src20_src.lc and ../../xmm0085100101/products/lightcurves/fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src20_bgd.lc exist, delete to re-create
[Tue Mar 13 12:19:56 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Mar 13 12:19:56 2012] rmf not generated due to insufficient counts
[Tue Mar 13 12:19:56 2012] fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src20.arf exists, delete to re-create
[Tue Mar 13 12:21:01 2012] Updating aperture counts using extracted products
[Tue Mar 13 12:21:01 2012] Error reading totcts from fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Tue Mar 13 12:21:06 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 12:21:06 2012] Using photon index=1.80, rate=0.0149, arf fullrun_pn_xmm0085100101_pi300-10000_pass1_cl_src20.arf
[Tue Mar 13 12:21:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 12:21:06 2012] Updating source flux to 1.6e-13
[Tue Mar 13 12:21:18 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting