[Fri Jul 20 10:11:18 2012] Detection parameters:
  Position = (379.6, 254.0) = 3 31 48.65 -63 31 55.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1888.6 +/- 51.7
  Background counts = 10.1
  Rate = 0.4 +/- 0.01

[Fri Jul 20 10:11:20 2012] Off-axis axis estimate = 6.71'
[Fri Jul 20 10:13:27 2012] Using EEF radius (= 9.78 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 10:13:27 2012] Initial guess for spatial extent in simple fitting = 9.78"
[Fri Jul 20 10:13:27 2012] source mask rpix=2.2, npix_max = 30, mask sum = 30, frac = 0.993
[Fri Jul 20 10:13:27 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.78"
[Fri Jul 20 10:59:05 2012] fullrun_pn_xmm0084960201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul 20 10:59:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960201_pi300-10000_cl_pass0_src1.csv
[Fri Jul 20 10:59:05 2012] fullrun_pn_xmm0084960201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul 20 10:59:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960201_pi300-10000_cl_pass0_src1.csv
[Fri Jul 20 10:59:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084960201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084960201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 10:59:05 2012] fullrun_pn_xmm0084960201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul 20 10:59:05 2012] fullrun_pn_xmm0084960201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul 20 10:59:05 2012] Fit fullrun_pn_xmm0084960201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jul 20 12:25:58 2012] Spatial fit model total counts = 1847.420000, observed total counts = 1847.000000
[Fri Jul 20 12:25:58 2012] Offset between fit and detection position for source 1 = 0.159467 pixels
[Fri Jul 20 12:25:58 2012] 1849.151000 total counts/ 447.201000 bgd. counts: snr = 66.295056
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.159467 pixels
  Position = (379.4, 254.0) = 3 31 48.76 -63 31 54.9
  Extent = 6.1 (5.8-6.3)", rotation angle = 0
  Source counts = 1402.0 +/- 43.0
  Background counts = 447.2
  Rate = 0.1 +/- 0.004
[Fri Jul 20 12:25:58 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 12:25:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 12:25:58 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 12:25:58 2012] Source does appear to be extended
[Fri Jul 20 12:25:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 12:26:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 20 12:26:18 2012] Initial guess for spatial extent in simple fitting = 6.08"
[Fri Jul 20 12:26:18 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.833
[Fri Jul 20 12:26:18 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.08"
[Fri Jul 20 12:59:34 2012] fullrun_pn_xmm0084960201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jul 20 12:59:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960201_pi300-10000_cl_pass1_src1.csv
[Fri Jul 20 12:59:34 2012] fullrun_pn_xmm0084960201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jul 20 12:59:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960201_pi300-10000_cl_pass1_src1.csv
[Fri Jul 20 12:59:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084960201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084960201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 12:59:34 2012] fullrun_pn_xmm0084960201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jul 20 12:59:34 2012] fullrun_pn_xmm0084960201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jul 20 12:59:34 2012] Fit fullrun_pn_xmm0084960201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jul 20 14:00:53 2012] Spatial fit model total counts = 1801.880000, observed total counts = 1796.000000
[Fri Jul 20 14:00:53 2012] Offset between fit and detection position for source 1 = 0.004645 pixels
[Fri Jul 20 14:00:53 2012] 1804.738000 total counts/ 425.258000 bgd. counts: snr = 66.894307
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.004645 pixels
  Position = (379.4, 254.0) = 3 31 48.76 -63 31 54.9
  Extent = 5.9 (5.7-6.2)", rotation angle = 0
  Source counts = 1379.5 +/- 42.5
  Background counts = 425.3
  Rate = 0.1 +/- 0.004
[Fri Jul 20 14:00:53 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 14:00:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 14:00:53 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 14:00:53 2012] Source does appear to be extended
[Fri Jul 20 14:00:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 14:01:08 2012] Counts = 1379.480000, rescaling region sizes by 2.000000
[Fri Jul 20 14:01:08 2012] XMMSAS src. selection expression = ellipse(32962.607000, 22051.040600, 708.132020, 708.132020, 0.000000, X, Y)
[Fri Jul 20 14:01:08 2012] Writing source region out to fullrun_pn_xmm0084960201_pi300-10000_pass1_cl_src1_src.reg
[Fri Jul 20 14:01:08 2012] Extracting stamp from image fullrun_pn_xmm0084960201_pi300-10000_cl_sm2.00.img.gz, (339, 213) - (420, 295)
[Fri Jul 20 14:01:08 2012] XMMSAS bgd. selection expression = annulus(32962.607000, 22051.040600, 2360.440068, 4720.880136, X, Y) && !ellipse(28890.089400, 21250.443520, 536.755215, 360.052010, 317.721934, X, Y) && !ellipse(30418.239960, 20314.135681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37594.418400, 27137.105400, 544.401616, 544.401616, 318.037410, X, Y) && !ellipse(34957.371800, 25971.934800, 719.900021, 719.900021, 0.000000, X, Y) && !ellipse(32736.144400, 25842.298800, 454.499735, 454.499735, 0.000000, X, Y) && !ellipse(34054.225586, 22972.289948, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 20 14:01:08 2012] Writing fullrun_pn_xmm0084960201_pi300-10000_pass1_cl_src1.gif
[Fri Jul 20 14:01:15 2012] Mean detx,y = (-5320.69, 8275.82) 
[Fri Jul 20 14:01:17 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 14:02:34 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 14:02:34 2012] Setting source spectrum file to fullrun_pn_xmm0084960201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 20 14:02:34 2012] Setting bgd. spectrum file to fullrun_pn_xmm0084960201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jul 20 15:20:28 2012] Updating aperture counts using extracted products
[Fri Jul 20 15:20:28 2012] Error reading totcts from fullrun_pn_xmm0084960201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 20 15:20:29 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 15:20:29 2012] Using photon index=1.80, rate=0.138, arf fullrun_pn_xmm0084960201_pi300-10000_pass1_cl_src1.arf
[Fri Jul 20 15:20:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 15:20:29 2012] Updating source flux to 6e-13
[Fri Jul 20 15:21:30 2012] Reading fit data from xmm0084960201/analysis//spectral/fullrun_pn_xmm0084960201_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jul 20 15:21:30 2012] Spectral fit parameter nH value = 7.51163e+21
[Fri Jul 20 15:21:30 2012] Spectral fit parameter PhoIndex value = 7.43988
[Fri Jul 20 15:21:30 2012] Failed to get F(0.3-8.0) from xmm0084960201/analysis//spectral/fullrun_pn_xmm0084960201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jul 20 15:21:30 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 15:21:30 2012] Using Nh = 7.5e+21, photon index=7.44, rate=0.138, arf fullrun_pn_xmm0084960201_pi300-10000_pass1_cl_src1.arf
[Fri Jul 20 15:21:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 15:21:30 2012] Updating source flux to 3.4e-13