[Fri Jul 20 10:12:07 2012] Detection parameters:
  Position = (167.4, 354.5) = 3 34 6.33 -63 24 35.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 22.4 +/- 6.5
  Background counts = 2.8
  Rate = 0.004 +/- 0.001

[Fri Jul 20 10:12:08 2012] Off-axis axis estimate = 10.33'
[Fri Jul 20 11:29:07 2012] Using EEF radius (= 11.59 ")to estimate initial spatial extent for simple fitting
[Fri Jul 20 11:29:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 20 11:29:07 2012] Initial guess for spatial extent in simple fitting = 11.59"
[Fri Jul 20 11:29:07 2012] source mask rpix=2.7, npix_max = 40, mask sum = 49, frac = 1.223
[Fri Jul 20 11:29:07 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 11.59"
[Fri Jul 20 12:25:51 2012] fullrun_mos2_xmm0084960201_pi300-10000_cl_pass0_src12.ximg exists
[Fri Jul 20 12:25:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084960201_pi300-10000_cl_pass0_src12.csv
[Fri Jul 20 12:25:51 2012] fullrun_mos2_xmm0084960201_pi300-10000_cl_pass0_src12_1.ximg exists
[Fri Jul 20 12:25:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084960201_pi300-10000_cl_pass0_src12.csv
[Fri Jul 20 12:25:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084960201_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084960201_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 12:25:51 2012] fullrun_mos2_xmm0084960201_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Fri Jul 20 12:25:51 2012] fullrun_mos2_xmm0084960201_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Fri Jul 20 12:25:51 2012] Fit fullrun_mos2_xmm0084960201_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Fri Jul 20 12:26:05 2012] Spatial fit model total counts = 39.741000, observed total counts = 40.000000
[Fri Jul 20 12:26:05 2012] Offset between fit and detection position for source 11 = 0.518760 pixels
[Fri Jul 20 12:26:05 2012] 39.527000 total counts/ 21.089700 bgd. counts: snr = 4.014783
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.518760 pixels
  Position = (167.9, 354.8) = 3 34 6.06 -63 24 35.6
  Extent = 6.9 (4.7-12.6)", rotation angle = 0
  Source counts = 18.4 +/- 6.3
  Background counts = 21.1
  Rate = 0.002 +/- 0.0005
[Fri Jul 20 12:26:05 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 12:26:05 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 12:26:05 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 12:26:05 2012] Source does appear to be extended
[Fri Jul 20 12:26:05 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 13:28:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 20 13:28:06 2012] Initial guess for spatial extent in simple fitting = 6.87"
[Fri Jul 20 13:28:06 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.924
[Fri Jul 20 13:28:06 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 6.87"
[Fri Jul 20 14:00:48 2012] fullrun_mos2_xmm0084960201_pi300-10000_cl_pass1_src11.ximg exists
[Fri Jul 20 14:00:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084960201_pi300-10000_cl_pass1_src11.csv
[Fri Jul 20 14:00:48 2012] fullrun_mos2_xmm0084960201_pi300-10000_cl_pass1_src11_1.ximg exists
[Fri Jul 20 14:00:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084960201_pi300-10000_cl_pass1_src11.csv
[Fri Jul 20 14:00:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084960201_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084960201_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 20 14:00:48 2012] fullrun_mos2_xmm0084960201_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Fri Jul 20 14:00:48 2012] fullrun_mos2_xmm0084960201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Fri Jul 20 14:00:48 2012] Fit fullrun_mos2_xmm0084960201_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Fri Jul 20 14:01:00 2012] Spatial fit model total counts = 36.987000, observed total counts = 37.000000
[Fri Jul 20 14:01:00 2012] Offset between fit and detection position for source 11 = 0.264224 pixels
[Fri Jul 20 14:01:00 2012] 37.910100 total counts/ 19.098600 bgd. counts: snr = 4.304499
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.264224 pixels
  Position = (167.7, 354.6) = 3 34 6.19 -63 24 36.4
  Extent = 6.7 (4.8-11.1)", rotation angle = 0
  Source counts = 18.8 +/- 6.2
  Background counts = 19.1
  Rate = 0.002 +/- 0.0005
[Fri Jul 20 14:01:00 2012] Vigneting correction estimate = 1.000000
[Fri Jul 20 14:01:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 20 14:01:00 2012] Assessing source extent using major axis lower bound
[Fri Jul 20 14:01:00 2012] Source does appear to be extended
[Fri Jul 20 14:01:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 15:06:10 2012] XMMSAS src. selection expression = ellipse(14537.910800, 30802.680000, 404.479812, 404.479812, 0.000000, X, Y)
[Fri Jul 20 15:06:10 2012] Writing source region out to fullrun_mos2_xmm0084960201_pi300-10000_pass1_cl_src11_src.reg
[Fri Jul 20 15:06:10 2012] Extracting stamp from image fullrun_mos2_xmm0084960201_pi300-10000_cl_sm2.00.img.gz, (144, 331) - (191, 378)
[Fri Jul 20 15:06:10 2012] XMMSAS bgd. selection expression = annulus(14537.910800, 30802.680000, 674.133019, 1348.266039, X, Y)
[Fri Jul 20 15:06:10 2012] Writing fullrun_mos2_xmm0084960201_pi300-10000_pass1_cl_src11.gif
[Fri Jul 20 15:08:27 2012] Mean detx,y = (-4255.86, 9494.23) 
[Fri Jul 20 15:08:28 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 15:08:36 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 15:08:36 2012] Setting source spectrum file to fullrun_mos2_xmm0084960201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri Jul 20 15:08:36 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0084960201_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Fri Jul 20 15:19:18 2012] Not generating rmf since there are only 18 counts
[Fri Jul 20 15:19:18 2012] rmf not generated due to insufficient counts
[Fri Jul 20 15:20:30 2012] Updating aperture counts using extracted products
[Fri Jul 20 15:20:30 2012] Error reading totcts from fullrun_mos2_xmm0084960201_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri Jul 20 15:20:30 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 15:20:30 2012] Using photon index=1.80, rate=0.00153, arf fullrun_mos2_xmm0084960201_pi300-10000_pass1_cl_src11.arf
[Fri Jul 20 15:20:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 15:20:30 2012] Updating source flux to 3.2e-14
[Fri Jul 20 15:20:46 2012] Source 11 has fewer than 100.000000 counts, skipping spectral fitting