[Thu Jun 14 10:40:11 2012] Detection parameters:
  Position = (406.2, 286.1) = 3 18 48.90 -62 28 14.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 108.5 +/- 21.3
  Background counts = 159.3
  Rate = 0.006 +/- 0.001

[Thu Jun 14 10:40:13 2012] Off-axis axis estimate = 7.86'
[Thu Jun 14 10:43:29 2012] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 10:43:29 2012] Initial guess for spatial extent in simple fitting = 10.36"
[Thu Jun 14 10:43:29 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.084
[Thu Jun 14 10:43:29 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 10.36"
[Thu Jun 14 15:20:09 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src9.ximg exists
[Thu Jun 14 15:20:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src9.csv
[Thu Jun 14 15:20:10 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src9_1.ximg exists
[Thu Jun 14 15:20:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src9.csv
[Thu Jun 14 15:20:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 15:20:12 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Thu Jun 14 15:20:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Thu Jun 14 15:20:12 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Thu Jun 14 15:20:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Thu Jun 14 15:20:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 15:35:50 2012] Warning, spatial fit 9 centroid is now closest to src. 11
[Thu Jun 14 15:35:50 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 15:35:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 15:35:50 2012] Assessing source extent using major
[Thu Jun 14 15:35:50 2012] Source does appear to be extended
[Thu Jun 14 15:35:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 15:35:50 2012] Source is confused with source 6
[Thu Jun 14 15:36:03 2012] Using EEF radius (= 10.36 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 15:36:03 2012] Initial guess for spatial extent in simple fitting = 10.36"
[Thu Jun 14 15:36:03 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.084
[Thu Jun 14 15:36:03 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 10.36"
[Thu Jun 14 20:31:32 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src9.ximg exists
[Thu Jun 14 20:31:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src9.csv
[Thu Jun 14 20:31:32 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu Jun 14 20:31:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src9.csv
[Thu Jun 14 20:31:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 20:31:34 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu Jun 14 20:31:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Thu Jun 14 20:31:34 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu Jun 14 20:31:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src9.csv
[Thu Jun 14 20:31:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 20:46:41 2012] Source 9 is offset by -6.561290 and 2.266642 pixels which is larger than
2 X fitted extent = 1.069733 x 1.069733, not incorporating fit results
[Thu Jun 14 20:46:41 2012] Warning, spatial fit 9 centroid is now closest to src. 11
[Thu Jun 14 20:46:41 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 20:46:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 20:46:41 2012] Assessing source extent using major
[Thu Jun 14 20:46:41 2012] Source does appear to be extended
[Thu Jun 14 20:46:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 20:46:53 2012] XMMSAS src. selection expression = ellipse(35288.455780, 24842.667816, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 14 20:46:53 2012] Writing source region out to fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src9_src.reg
[Thu Jun 14 20:46:53 2012] Extracting stamp from image fullrun_pn_xmm0084960101_pi300-10000_cl_sm2.00.img.gz, (369, 249) - (444, 324)
[Thu Jun 14 20:46:53 2012] XMMSAS bgd. selection expression = annulus(35288.455780, 24842.667816, 1087.500000, 2175.000000, X, Y) && !ellipse(38321.898438, 25181.757538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37205.737396, 25385.541656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37836.715729, 25268.048645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34750.225586, 25017.960815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36432.845093, 24836.741791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38059.018677, 24660.615112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34729.906647, 24540.132538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36806.264343, 24439.137878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38091.404724, 23760.276093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37405.573486, 22837.961395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38781.134200, 22422.900000, 1775.640051, 1775.640051, 0.000000, X, Y) && !ellipse(37897.250397, 21883.823517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38815.474000, 21778.138400, 1871.360054, 1871.360054, 0.000000, X, Y)
[Thu Jun 14 20:46:53 2012] Writing fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src9.gif
[Thu Jun 14 20:49:34 2012] Mean detx,y = (-2942.56, 10714.95) 
[Thu Jun 14 20:49:36 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 20:49:58 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 20:49:58 2012] Setting source spectrum file to fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Jun 14 20:49:58 2012] Setting bgd. spectrum file to fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Thu Jun 14 21:16:39 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 14 21:16:39 2012] rmf not generated due to insufficient counts
[Thu Jun 14 21:40:51 2012] Updating aperture counts using extracted products
[Thu Jun 14 21:40:51 2012] Error reading totcts from fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Thu Jun 14 21:40:52 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 21:40:52 2012] Using photon index=1.80, rate=0.00592, arf fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src9.arf
[Thu Jun 14 21:40:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 21:40:52 2012] Updating source flux to 2.8e-14
[Thu Jun 14 21:41:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 14 21:41:28 2012] xmm0084960101/analysis//spectral/fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete