[Thu Jun 14 10:40:13 2012] Detection parameters:
  Position = (456.4, 197.0) = 3 18 17.02 -62 34 33.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 99.7 +/- 17.0
  Background counts = 96.8
  Rate = 0.005 +/- 0.0009

[Thu Jun 14 10:40:13 2012] Off-axis axis estimate = 13.61'
[Thu Jun 14 10:43:29 2012] Using EEF radius (= 13.23 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 10:43:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 14 10:43:29 2012] Initial guess for spatial extent in simple fitting = 13.23"
[Thu Jun 14 10:43:29 2012] source mask rpix=3.0, npix_max = 50, mask sum = 29, frac = 0.578
[Thu Jun 14 10:43:29 2012] Giving source the simple spatial ID 64 for pass 0, mean size = 13.23"
[Thu Jun 14 15:20:11 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src64.ximg exists
[Thu Jun 14 15:20:11 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src64.csv
[Thu Jun 14 15:20:11 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src64_1.ximg exists
[Thu Jun 14 15:20:11 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src64.csv
[Thu Jun 14 15:20:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src64_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 15:20:13 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src64.ximg exists
[Thu Jun 14 15:20:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src64.csv
[Thu Jun 14 15:20:13 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src64_1.ximg exists
[Thu Jun 14 15:20:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src64.csv
[Thu Jun 14 15:20:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src64_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 15:35:50 2012] Spatial fit model total counts = 249.260000, observed total counts = 245.000000
[Thu Jun 14 15:35:50 2012] Offset between fit and detection position for source 66 = 2.965676 pixels
[Thu Jun 14 15:35:50 2012] Warning, changing simple spatial fit ID from 64 to 63
[Thu Jun 14 15:35:50 2012] 204.837700 total counts/ 39.572700 bgd. counts: snr = 26.271390
Spatial fit parameters:
  Offset between fit and detection position for source 66 = 2.965676 pixels
  Position = (454.2, 199.0) = 3 18 18.42 -62 34 30.6
  Extent = 25.6 (25.0-26.0)", rotation angle = 0
  Source counts = 165.3 +/- 14.3
  Background counts = 39.6
  Rate = 0.05 +/- 0.004
[Thu Jun 14 15:35:50 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 15:35:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 15:35:50 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 15:35:50 2012] Source does appear to be extended
[Thu Jun 14 15:35:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 15:35:50 2012] Source is confused with source 58
[Thu Jun 14 15:36:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 14 15:36:03 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 14 15:36:03 2012] Initial guess for spatial extent in simple fitting = 25.64"
[Thu Jun 14 15:36:03 2012] source mask rpix=5.9, npix_max = 163, mask sum = 101, frac = 0.617
[Thu Jun 14 15:36:03 2012] Giving source the simple spatial ID 62 for pass 1, mean size = 25.64"
[Thu Jun 14 20:31:34 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src62.ximg exists
[Thu Jun 14 20:31:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src62.csv
[Thu Jun 14 20:31:34 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src62_1.ximg exists
[Thu Jun 14 20:31:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src62.csv
[Thu Jun 14 20:31:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 20:31:36 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src62.ximg exists
[Thu Jun 14 20:31:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src62.csv
[Thu Jun 14 20:31:36 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src62_1.ximg exists
[Thu Jun 14 20:31:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src62.csv
[Thu Jun 14 20:31:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 20:46:41 2012] Warning, spatial fit 62 centroid is now closest to src. 64
[Thu Jun 14 20:46:41 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 20:46:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 20:46:41 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 20:46:41 2012] Source does appear to be extended
[Thu Jun 14 20:46:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 20:46:55 2012] XMMSAS src. selection expression = ellipse(39467.106000, 17264.540200, 1538.676044, 1538.676044, 0.000000, X, Y)
[Thu Jun 14 20:46:55 2012] Writing source region out to fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src66_src.reg
[Thu Jun 14 20:46:55 2012] Extracting stamp from image fullrun_pn_xmm0084960101_pi300-10000_cl_sm2.00.img.gz, (366, 111) - (543, 287)
[Thu Jun 14 20:46:55 2012] XMMSAS bgd. selection expression = annulus(39467.106000, 17264.540200, 2564.460074, 5128.920148, X, Y) && !ellipse(37405.573486, 22837.961395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38781.134200, 22422.900000, 1775.640051, 1775.640051, 0.000000, X, Y) && !ellipse(37897.250397, 21883.823517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38815.474000, 21778.138400, 1871.360054, 1871.360054, 0.000000, X, Y) && !ellipse(38997.337891, 21270.665741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39181.366000, 20020.217200, 2005.096058, 2005.096058, 0.000000, X, Y) && !ellipse(38499.137573, 20045.617966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39064.467651, 19460.756165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38223.272064, 18818.192612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39368.614532, 18649.457535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38815.786987, 18560.749023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38379.608154, 18318.725845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38551.723083, 17729.377045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38940.809662, 17106.832413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38904.167603, 15604.835876, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 14 20:46:55 2012] Writing fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src66.gif
[Thu Jun 14 21:08:57 2012] Mean detx,y = (-10731.68, 13639.97) 
[Thu Jun 14 21:08:59 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 21:09:58 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 21:09:58 2012] Setting source spectrum file to fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Thu Jun 14 21:09:58 2012] Setting bgd. spectrum file to fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src66_bgd.pi.gz
[Thu Jun 14 21:40:52 2012] Updating aperture counts using extracted products
[Thu Jun 14 21:40:52 2012] Error reading totcts from fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Thu Jun 14 21:40:53 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 21:40:53 2012] Using photon index=1.80, rate=0.0457, arf fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src66.arf
[Thu Jun 14 21:40:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 21:40:53 2012] Updating source flux to 5.5e-13
[Thu Jun 14 21:41:01 2012] Flag c found in src. 66 procflags, skipping spectral fitting
[Thu Jun 14 21:41:28 2012] Reading fit data from xmm0084960101/analysis//spectral/fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src66_pl.csv
[Thu Jun 14 21:41:28 2012] Spectral fit parameter nH value = 546060000000.0
[Thu Jun 14 21:41:28 2012] Spectral fit parameter PhoIndex value = 0.391119
[Thu Jun 14 21:41:28 2012] Failed to get F(0.3-8.0) from xmm0084960101/analysis//spectral/fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src66_pl.csv, possibly due to different flux energy range selected
[Thu Jun 14 21:41:28 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 21:41:28 2012] Using Nh = 5.5e+11, photon index=0.39, rate=0.0457, arf fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src66.arf
[Thu Jun 14 21:41:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 21:41:28 2012] Updating source flux to 1.6e-12