[Thu Jun 14 10:40:12 2012] Detection parameters:
  Position = (447.1, 250.1) = 3 18 23.07 -62 30 40.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 97.6 +/- 21.7
  Background counts = 124.4
  Rate = 0.005 +/- 0.001

[Thu Jun 14 10:40:13 2012] Off-axis axis estimate = 11.34'
[Thu Jun 14 10:43:29 2012] Using EEF radius (= 12.10 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 10:43:29 2012] Initial guess for spatial extent in simple fitting = 12.10"
[Thu Jun 14 10:43:29 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.836
[Thu Jun 14 10:43:29 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 12.10"
[Thu Jun 14 15:20:10 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src39.ximg exists
[Thu Jun 14 15:20:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src39.csv
[Thu Jun 14 15:20:10 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src39_1.ximg exists
[Thu Jun 14 15:20:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src39.csv
[Thu Jun 14 15:20:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 15:20:13 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Thu Jun 14 15:20:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src39.csv
[Thu Jun 14 15:20:13 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Thu Jun 14 15:20:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src39.csv
[Thu Jun 14 15:20:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 15:35:50 2012] Spatial fit model total counts = 230.562000, observed total counts = 230.000000
[Thu Jun 14 15:35:50 2012] Offset between fit and detection position for source 40 = 0.926046 pixels
[Thu Jun 14 15:35:50 2012] Warning, changing simple spatial fit ID from 39 to 37
[Thu Jun 14 15:35:50 2012] 207.058300 total counts/ 151.261000 bgd. counts: snr = 4.536801
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 0.926046 pixels
  Position = (446.7, 250.9) = 3 18 23.34 -62 30 45.1
  Extent = 23.4 (23.4-46.8)", rotation angle = 0
  Source counts = 55.8 +/- 14.4
  Background counts = 151.3
  Rate = 0.02 +/- 0.004
[Thu Jun 14 15:35:50 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 15:35:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 15:35:50 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 15:35:50 2012] Source does appear to be extended
[Thu Jun 14 15:35:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 15:35:50 2012] Source is confused with source 31
[Thu Jun 14 15:36:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 14 15:36:03 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 14 15:36:03 2012] Initial guess for spatial extent in simple fitting = 23.39"
[Thu Jun 14 15:36:03 2012] source mask rpix=5.4, npix_max = 138, mask sum = 133, frac = 0.963
[Thu Jun 14 15:36:03 2012] Giving source the simple spatial ID 38 for pass 1, mean size = 23.39"
[Thu Jun 14 20:31:33 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src38.ximg exists
[Thu Jun 14 20:31:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src38.csv
[Thu Jun 14 20:31:33 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src38_1.ximg exists
[Thu Jun 14 20:31:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src38.csv
[Thu Jun 14 20:31:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 20:31:35 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Thu Jun 14 20:31:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src38.csv
[Thu Jun 14 20:31:35 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Thu Jun 14 20:31:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src38.csv
[Thu Jun 14 20:31:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 20:46:41 2012] Warning, spatial fit 38 centroid is now closest to src. 12
[Thu Jun 14 20:46:41 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 20:46:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 20:46:41 2012] Assessing source extent using major axis lower bound
[Thu Jun 14 20:46:41 2012] Source does appear to be extended
[Thu Jun 14 20:46:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 20:46:54 2012] XMMSAS src. selection expression = ellipse(38815.474000, 21778.138400, 1403.520040, 1403.520040, 0.000000, X, Y)
[Thu Jun 14 20:46:54 2012] Writing source region out to fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src40_src.reg
[Thu Jun 14 20:46:54 2012] Extracting stamp from image fullrun_pn_xmm0084960101_pi300-10000_cl_sm2.00.img.gz, (366, 170) - (527, 332)
[Thu Jun 14 20:46:54 2012] XMMSAS bgd. selection expression = annulus(38815.474000, 21778.138400, 2339.200067, 4678.400135, X, Y) && !ellipse(38321.898438, 25181.757538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37205.737396, 25385.541656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37836.715729, 25268.048645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38698.655060, 24993.590302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34750.225586, 25017.960815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36432.845093, 24836.741791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35288.455780, 24842.667816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38059.018677, 24660.615112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34729.906647, 24540.132538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36806.264343, 24439.137878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38701.888885, 23932.391022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38091.404724, 23760.276093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37405.573486, 22837.961395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38781.134200, 22422.900000, 1775.640051, 1775.640051, 0.000000, X, Y) && !ellipse(37897.250397, 21883.823517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38997.337891, 21270.665741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39181.366000, 20020.217200, 2005.096058, 2005.096058, 0.000000, X, Y) && !ellipse(38499.137573, 20045.617966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39064.467651, 19460.756165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38223.272064, 18818.192612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39368.614532, 18649.457535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38815.786987, 18560.749023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38379.608154, 18318.725845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38551.723083, 17729.377045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38940.809662, 17106.832413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39467.106000, 17264.540200, 2051.568059, 2051.568059, 0.000000, X, Y)
[Thu Jun 14 20:46:54 2012] Writing fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src40.gif
[Thu Jun 14 21:00:24 2012] Mean detx,y = (-6249.31, 13546.86) 
[Thu Jun 14 21:00:26 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 21:01:03 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 21:01:03 2012] Setting source spectrum file to fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Thu Jun 14 21:01:03 2012] Setting bgd. spectrum file to fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Thu Jun 14 21:22:13 2012] Not generating rmf since there are only 55 counts
[Thu Jun 14 21:22:13 2012] rmf not generated due to insufficient counts
[Thu Jun 14 21:40:51 2012] Updating aperture counts using extracted products
[Thu Jun 14 21:40:51 2012] Error reading totcts from fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Thu Jun 14 21:40:53 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 21:40:53 2012] Using photon index=1.80, rate=0.0154, arf fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src40.arf
[Thu Jun 14 21:40:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 21:40:53 2012] Updating source flux to 1e-13
[Thu Jun 14 21:41:01 2012] Flag c found in src. 40 procflags, skipping spectral fitting
[Thu Jun 14 21:41:01 2012] Source 40 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Jun 14 21:41:28 2012] xmm0084960101/analysis//spectral/fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src40_pl.csv not found, spectral fit skipped or did not complete