[Thu Jun 14 10:40:12 2012] Detection parameters: Position = (284.2, 253.9) = 3 20 5.44 -62 30 33.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 98.7 +/- 21.6 Background counts = 164.2 Rate = 0.008 +/- 0.002 [Thu Jun 14 10:40:13 2012] Off-axis axis estimate = 3.39' [Thu Jun 14 10:43:29 2012] Using EEF radius (= 8.12 ")to estimate initial spatial extent for simple fitting [Thu Jun 14 10:43:29 2012] Initial guess for spatial extent in simple fitting = 8.12" [Thu Jun 14 10:43:29 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.892 [Thu Jun 14 10:43:29 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 8.12" [Thu Jun 14 15:20:10 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src35.ximg exists [Thu Jun 14 15:20:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src35.csv [Thu Jun 14 15:20:10 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src35_1.ximg exists [Thu Jun 14 15:20:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src35.csv [Thu Jun 14 15:20:10 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src35_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Jun 14 15:20:12 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src35.ximg exists [Thu Jun 14 15:20:12 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists [Thu Jun 14 15:20:12 2012] Fit fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly [Thu Jun 14 15:35:50 2012] Spatial fit model total counts = 47.127000, observed total counts = 254.000000 [Thu Jun 14 15:35:50 2012] Poor agreement between spatial fit and data for source 36 It may help to tweak spatial fit manually Not incorporating fit results [Thu Jun 14 15:35:50 2012] Warning, spatial fit 35 centroid is now closest to src. 34 [Thu Jun 14 15:35:50 2012] Source 36 is offset by -2.236830 and -3.960764 pixels which is larger than 2 X fitted extent = 0.950694 x 0.950694, not incorporating fit results [Thu Jun 14 15:35:50 2012] Source 36 is offset by 1.888895 and -0.003523 pixels which is larger than 2 X fitted extent = 0.961140 x 0.961140, not incorporating fit results [Thu Jun 14 15:35:50 2012] Vigneting correction estimate = 1.000000 [Thu Jun 14 15:35:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Jun 14 15:35:50 2012] Assessing source extent using major [Thu Jun 14 15:35:50 2012] Source does appear to be extended [Thu Jun 14 15:35:50 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Jun 14 15:35:50 2012] Source is confused with source 34 [Thu Jun 14 15:36:03 2012] Using EEF radius (= 8.12 ")to estimate initial spatial extent for simple fitting [Thu Jun 14 15:36:03 2012] Initial guess for spatial extent in simple fitting = 8.12" [Thu Jun 14 15:36:03 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.892 [Thu Jun 14 15:36:03 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 8.12" [Thu Jun 14 20:31:33 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src35.ximg exists [Thu Jun 14 20:31:33 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src35_1.ximg exists [Thu Jun 14 20:31:33 2012] Fit fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src35 appears to have run properly [Thu Jun 14 20:31:35 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src35.ximg exists [Thu Jun 14 20:31:35 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists [Thu Jun 14 20:31:35 2012] Fit fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly [Thu Jun 14 20:46:41 2012] Spatial fit model total counts = 19.273600, observed total counts = 203.000000 [Thu Jun 14 20:46:41 2012] Poor agreement between spatial fit and data for source 36 It may help to tweak spatial fit manually Not incorporating fit results [Thu Jun 14 20:46:41 2012] Source 36 is offset by -4.453473 and 1.594811 pixels which is larger than 2 X fitted extent = 1.430235 x 1.430235, not incorporating fit results [Thu Jun 14 20:46:41 2012] Source 36 is offset by 1.888895 and 0.086638 pixels which is larger than 2 X fitted extent = 0.961140 x 0.961140, not incorporating fit results [Thu Jun 14 20:46:41 2012] Vigneting correction estimate = 1.000000 [Thu Jun 14 20:46:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Jun 14 20:46:41 2012] Assessing source extent using major [Thu Jun 14 20:46:41 2012] Source does appear to be extended [Thu Jun 14 20:46:41 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Jun 14 20:46:54 2012] XMMSAS src. selection expression = ellipse(24676.879822, 22040.937531, 652.500000, 652.500000, 0.000000, X, Y) [Thu Jun 14 20:46:54 2012] Writing source region out to fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src36_src.reg [Thu Jun 14 20:46:54 2012] Extracting stamp from image fullrun_pn_xmm0084960101_pi300-10000_cl_sm2.00.img.gz, (247, 216) - (322, 291) [Thu Jun 14 20:46:54 2012] XMMSAS bgd. selection expression = annulus(24676.879822, 22040.937531, 1087.500000, 2175.000000, X, Y) && !ellipse(27063.230774, 24311.826569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25443.445190, 24223.023804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25882.979980, 24056.319824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26365.746613, 24055.833954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24637.439362, 24044.720001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25739.356171, 23573.871796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24978.669037, 23571.214111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24462.640198, 23536.855377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23769.398773, 23487.153229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25290.210175, 22621.287109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26115.770000, 22529.159200, 411.180812, 411.180812, 0.000000, X, Y) && !ellipse(24236.771545, 22483.552155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26695.519836, 22320.063416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24220.504181, 21967.820679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24675.239014, 21444.744064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24029.692535, 21270.894073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25163.565277, 21336.787918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24263.935150, 20864.900269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25581.412000, 19828.298000, 1423.616041, 1423.616041, 0.000000, X, Y) && !ellipse(24930.074036, 20072.064713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24183.737335, 20047.878723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24022.030121, 19674.736923, 870.000000, 870.000000, 0.000000, X, Y) [Thu Jun 14 20:46:54 2012] Writing fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src36.gif [Thu Jun 14 20:59:30 2012] Mean detx,y = (-4821.75, -70.45) [Thu Jun 14 20:59:32 2012] Setting backscal keywords in source and bgd. spectrum [Thu Jun 14 20:59:40 2012] Binned source spectrum to 10 counts/bin [Thu Jun 14 20:59:41 2012] Setting source spectrum file to fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src36_src_b10.pi.gz [Thu Jun 14 20:59:41 2012] Setting bgd. spectrum file to fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src36_bgd.pi.gz [Thu Jun 14 21:21:54 2012] Not generating rmf since there are only 98 counts [Thu Jun 14 21:21:54 2012] rmf not generated due to insufficient counts [Thu Jun 14 21:40:51 2012] Updating aperture counts using extracted products [Thu Jun 14 21:40:51 2012] Error reading totcts from fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src36_src_b10.pi.gz [Thu Jun 14 21:40:52 2012] Calculating source flux in energy range 0.30-8.00 [Thu Jun 14 21:40:52 2012] Using photon index=1.80, rate=0.00767, arf fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src36.arf [Thu Jun 14 21:40:52 2012] Assuming count rate is from the 0.30-10.00 bandpass [Thu Jun 14 21:40:52 2012] Updating source flux to 2.5e-14 [Thu Jun 14 21:41:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Thu Jun 14 21:41:28 2012] xmm0084960101/analysis//spectral/fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src36_pl.csv not found, spectral fit skipped or did not complete