[Thu Jun 14 10:40:12 2012] Detection parameters:
  Position = (291.2, 260.6) = 3 20 1.01 -62 30 5.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 109.7 +/- 21.2
  Background counts = 168.7
  Rate = 0.008 +/- 0.002

[Thu Jun 14 10:40:13 2012] Off-axis axis estimate = 2.79'
[Thu Jun 14 10:43:29 2012] Using EEF radius (= 7.83 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 10:43:29 2012] Initial guess for spatial extent in simple fitting = 7.83"
[Thu Jun 14 10:43:29 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.182
[Thu Jun 14 10:43:29 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 7.83"
[Thu Jun 14 15:20:10 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src31.ximg exists
[Thu Jun 14 15:20:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src31.csv
[Thu Jun 14 15:20:10 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src31_1.ximg exists
[Thu Jun 14 15:20:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src31.csv
[Thu Jun 14 15:20:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 15:20:12 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Thu Jun 14 15:20:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src31.csv
[Thu Jun 14 15:20:12 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Thu Jun 14 15:20:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src31.csv
[Thu Jun 14 15:20:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 15:35:50 2012] Warning, spatial fit 31 centroid is now closest to src. 36
[Thu Jun 14 15:35:50 2012] Source 32 is offset by -0.439423 and 4.883300 pixels which is larger than
2 X fitted extent = 0.961117 x 0.961117, not incorporating fit results
[Thu Jun 14 15:35:50 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 15:35:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 15:35:50 2012] Assessing source extent using major
[Thu Jun 14 15:35:50 2012] Source does appear to be extended
[Thu Jun 14 15:35:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 15:36:03 2012] Using EEF radius (= 7.83 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 15:36:03 2012] Initial guess for spatial extent in simple fitting = 7.83"
[Thu Jun 14 15:36:03 2012] source mask rpix=1.8, npix_max = 21, mask sum = 25, frac = 1.182
[Thu Jun 14 15:36:03 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 7.83"
[Thu Jun 14 20:31:33 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src31.ximg exists
[Thu Jun 14 20:31:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src31.csv
[Thu Jun 14 20:31:33 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src31_1.ximg exists
[Thu Jun 14 20:31:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src31.csv
[Thu Jun 14 20:31:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 20:31:35 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Thu Jun 14 20:31:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src31.csv
[Thu Jun 14 20:31:35 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Thu Jun 14 20:31:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src31.csv
[Thu Jun 14 20:31:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 20:46:41 2012] Source 32 is offset by -6.946481 and 6.768289 pixels which is larger than
2 X fitted extent = 0.899503 x 0.899503, not incorporating fit results
[Thu Jun 14 20:46:41 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 20:46:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 20:46:41 2012] Assessing source extent using major
[Thu Jun 14 20:46:41 2012] Source does appear to be extended
[Thu Jun 14 20:46:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 20:46:54 2012] XMMSAS src. selection expression = ellipse(25290.210175, 22621.287109, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 14 20:46:54 2012] Writing source region out to fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src32_src.reg
[Thu Jun 14 20:46:54 2012] Extracting stamp from image fullrun_pn_xmm0084960101_pi300-10000_cl_sm2.00.img.gz, (254, 223) - (329, 298)
[Thu Jun 14 20:46:54 2012] XMMSAS bgd. selection expression = annulus(25290.210175, 22621.287109, 1087.500000, 2175.000000, X, Y) && !ellipse(28021.337921, 24037.745239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27063.230774, 24311.826569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25443.445190, 24223.023804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25882.979980, 24056.319824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26365.746613, 24055.833954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24637.439362, 24044.720001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25739.356171, 23573.871796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24978.669037, 23571.214111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24462.640198, 23536.855377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23769.398773, 23487.153229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26115.770000, 22529.159200, 411.180812, 411.180812, 0.000000, X, Y) && !ellipse(24236.771545, 22483.552155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26695.519836, 22320.063416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24676.879822, 22040.937531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24220.504181, 21967.820679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24675.239014, 21444.744064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24029.692535, 21270.894073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25163.565277, 21336.787918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24263.935150, 20864.900269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25581.412000, 19828.298000, 1423.616041, 1423.616041, 0.000000, X, Y) && !ellipse(24930.074036, 20072.064713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24183.737335, 20047.878723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24022.030121, 19674.736923, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 14 20:46:54 2012] Writing fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src32.gif
[Thu Jun 14 20:58:26 2012] Mean detx,y = (-4406.31, 580.88) 
[Thu Jun 14 20:58:27 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 20:58:36 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 20:58:36 2012] Setting source spectrum file to fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Thu Jun 14 20:58:36 2012] Setting bgd. spectrum file to fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Thu Jun 14 21:21:29 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 14 21:21:29 2012] rmf not generated due to insufficient counts
[Thu Jun 14 21:40:51 2012] Updating aperture counts using extracted products
[Thu Jun 14 21:40:51 2012] Error reading totcts from fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Thu Jun 14 21:40:52 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 21:40:52 2012] Using photon index=1.80, rate=0.00845, arf fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src32.arf
[Thu Jun 14 21:40:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 21:40:52 2012] Updating source flux to 2.7e-14
[Thu Jun 14 21:41:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 14 21:41:28 2012] xmm0084960101/analysis//spectral/fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src32_pl.csv not found, spectral fit skipped or did not complete