[Thu Jun 14 10:40:12 2012] Detection parameters:
  Position = (430.5, 263.1) = 3 18 33.56 -62 29 53.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 106.5 +/- 22.1
  Background counts = 159.8
  Rate = 0.006 +/- 0.001

[Thu Jun 14 10:40:13 2012] Off-axis axis estimate = 9.91'
[Thu Jun 14 10:43:29 2012] Using EEF radius (= 11.38 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 10:43:29 2012] Initial guess for spatial extent in simple fitting = 11.38"
[Thu Jun 14 10:43:29 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.081
[Thu Jun 14 10:43:29 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 11.38"
[Thu Jun 14 15:20:10 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src29.ximg exists
[Thu Jun 14 15:20:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src29.csv
[Thu Jun 14 15:20:10 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src29_1.ximg exists
[Thu Jun 14 15:20:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src29.csv
[Thu Jun 14 15:20:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 15:20:12 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Thu Jun 14 15:20:12 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Thu Jun 14 15:20:12 2012] Fit fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Thu Jun 14 15:35:50 2012] Spatial fit model total counts = 247.968000, observed total counts = 220.000000
[Thu Jun 14 15:35:50 2012] Poor agreement between spatial fit and data for source 30
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 14 15:35:50 2012] Warning, spatial fit 29 centroid is now closest to src. 29
[Thu Jun 14 15:35:50 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 15:35:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 15:35:50 2012] Assessing source extent using major
[Thu Jun 14 15:35:50 2012] Source does appear to be extended
[Thu Jun 14 15:35:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 15:35:50 2012] Source is confused with source 29
[Thu Jun 14 15:36:03 2012] Using EEF radius (= 11.38 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 15:36:03 2012] Initial guess for spatial extent in simple fitting = 11.38"
[Thu Jun 14 15:36:03 2012] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.081
[Thu Jun 14 15:36:03 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 11.38"
[Thu Jun 14 20:31:33 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src29.ximg exists
[Thu Jun 14 20:31:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src29.csv
[Thu Jun 14 20:31:33 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src29_1.ximg exists
[Thu Jun 14 20:31:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src29.csv
[Thu Jun 14 20:31:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 20:31:35 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Thu Jun 14 20:31:35 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Thu Jun 14 20:31:35 2012] Fit fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Thu Jun 14 20:46:41 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 22.920641 pixels away
[Thu Jun 14 20:46:41 2012] Warning, spatial fit 29 centroid is now closest to src. 29
[Thu Jun 14 20:46:41 2012] Source 30 is offset by 4.414500 and -7.243133 pixels which is larger than
2 X fitted extent = 2.614579 x 2.614579, not incorporating fit results
[Thu Jun 14 20:46:41 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 20:46:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 20:46:41 2012] Assessing source extent using major
[Thu Jun 14 20:46:41 2012] Source does appear to be extended
[Thu Jun 14 20:46:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 20:46:54 2012] XMMSAS src. selection expression = ellipse(37405.573486, 22837.961395, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 14 20:46:54 2012] Writing source region out to fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src30_src.reg
[Thu Jun 14 20:46:54 2012] Extracting stamp from image fullrun_pn_xmm0084960101_pi300-10000_cl_sm2.00.img.gz, (393, 226) - (468, 301)
[Thu Jun 14 20:46:54 2012] XMMSAS bgd. selection expression = annulus(37405.573486, 22837.961395, 1087.500000, 2175.000000, X, Y) && !ellipse(38321.898438, 25181.757538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37205.737396, 25385.541656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37836.715729, 25268.048645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38698.655060, 24993.590302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34750.225586, 25017.960815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36432.845093, 24836.741791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35288.455780, 24842.667816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38059.018677, 24660.615112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34729.906647, 24540.132538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36806.264343, 24439.137878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38701.888885, 23932.391022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38091.404724, 23760.276093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38781.134200, 22422.900000, 1775.640051, 1775.640051, 0.000000, X, Y) && !ellipse(37897.250397, 21883.823517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38815.474000, 21778.138400, 1871.360054, 1871.360054, 0.000000, X, Y) && !ellipse(38997.337891, 21270.665741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39181.366000, 20020.217200, 2005.096058, 2005.096058, 0.000000, X, Y) && !ellipse(38499.137573, 20045.617966, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 14 20:46:54 2012] Writing fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src30.gif
[Thu Jun 14 20:57:21 2012] Mean detx,y = (-5068.13, 12632.88) 
[Thu Jun 14 20:57:23 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 20:57:38 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 20:57:38 2012] Setting source spectrum file to fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Thu Jun 14 20:57:38 2012] Setting bgd. spectrum file to fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Thu Jun 14 21:19:07 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 14 21:19:07 2012] rmf not generated due to insufficient counts
[Thu Jun 14 21:40:51 2012] Updating aperture counts using extracted products
[Thu Jun 14 21:40:51 2012] Error reading totcts from fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Thu Jun 14 21:40:52 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 21:40:52 2012] Using photon index=1.80, rate=0.00582, arf fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src30.arf
[Thu Jun 14 21:40:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 21:40:52 2012] Updating source flux to 3.4e-14
[Thu Jun 14 21:41:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 14 21:41:28 2012] xmm0084960101/analysis//spectral/fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src30_pl.csv not found, spectral fit skipped or did not complete