[Thu Jun 14 10:40:12 2012] Detection parameters:
  Position = (287.7, 271.5) = 3 20 3.26 -62 29 19.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.9 +/- 21.9
  Background counts = 154.1
  Rate = 0.01 +/- 0.002

[Thu Jun 14 10:40:13 2012] Off-axis axis estimate = 2.10'
[Thu Jun 14 10:43:29 2012] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 10:43:29 2012] Initial guess for spatial extent in simple fitting = 7.48"
[Thu Jun 14 10:43:29 2012] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.269
[Thu Jun 14 10:43:29 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 7.48"
[Thu Jun 14 15:20:10 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src26.ximg exists
[Thu Jun 14 15:20:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src26.csv
[Thu Jun 14 15:20:10 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src26_1.ximg exists
[Thu Jun 14 15:20:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src26.csv
[Thu Jun 14 15:20:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 15:20:12 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Thu Jun 14 15:20:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Thu Jun 14 15:20:12 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Thu Jun 14 15:20:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Thu Jun 14 15:20:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 15:35:50 2012] Warning, spatial fit 26 centroid is now closest to src. 27
[Thu Jun 14 15:35:50 2012] Source 26 is offset by 1.347667 and 4.170024 pixels which is larger than
2 X fitted extent = 7.320920 x 0.928910, not incorporating fit results
[Thu Jun 14 15:35:50 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 15:35:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 15:35:50 2012] Assessing source extent using major
[Thu Jun 14 15:35:50 2012] Source does appear to be extended
[Thu Jun 14 15:35:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 15:35:50 2012] Source is confused with source 23
[Thu Jun 14 15:36:03 2012] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 15:36:03 2012] Initial guess for spatial extent in simple fitting = 7.48"
[Thu Jun 14 15:36:03 2012] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.269
[Thu Jun 14 15:36:03 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 7.48"
[Thu Jun 14 20:31:33 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src26.ximg exists
[Thu Jun 14 20:31:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src26.csv
[Thu Jun 14 20:31:33 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src26_1.ximg exists
[Thu Jun 14 20:31:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src26.csv
[Thu Jun 14 20:31:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 20:31:35 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Thu Jun 14 20:31:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src26.csv
[Thu Jun 14 20:31:35 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Thu Jun 14 20:31:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src26.csv
[Thu Jun 14 20:31:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 20:46:41 2012] Spatial fit model total counts = 243.025000, observed total counts = 219.000000
[Thu Jun 14 20:46:41 2012] Poor agreement between spatial fit and data for source 26
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 14 20:46:41 2012] Warning, spatial fit 26 centroid is now closest to src. 19
[Thu Jun 14 20:46:41 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 20:46:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 20:46:41 2012] Assessing source extent using major
[Thu Jun 14 20:46:41 2012] Source does appear to be extended
[Thu Jun 14 20:46:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 20:46:54 2012] XMMSAS src. selection expression = ellipse(24978.669037, 23571.214111, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 14 20:46:54 2012] Writing source region out to fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src26_src.reg
[Thu Jun 14 20:46:54 2012] Extracting stamp from image fullrun_pn_xmm0084960101_pi300-10000_cl_sm2.00.img.gz, (250, 234) - (325, 309)
[Thu Jun 14 20:46:54 2012] XMMSAS bgd. selection expression = annulus(24978.669037, 23571.214111, 1087.500000, 2175.000000, X, Y) && !ellipse(28021.337921, 24037.745239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27063.230774, 24311.826569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25443.445190, 24223.023804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25882.979980, 24056.319824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26365.746613, 24055.833954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24637.439362, 24044.720001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25739.356171, 23573.871796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24462.640198, 23536.855377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23769.398773, 23487.153229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25290.210175, 22621.287109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26115.770000, 22529.159200, 411.180812, 411.180812, 0.000000, X, Y) && !ellipse(24236.771545, 22483.552155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26695.519836, 22320.063416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24676.879822, 22040.937531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24220.504181, 21967.820679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24675.239014, 21444.744064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24029.692535, 21270.894073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25163.565277, 21336.787918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24263.935150, 20864.900269, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 14 20:46:54 2012] Writing fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src26.gif
[Thu Jun 14 20:55:47 2012] Mean detx,y = (-3235.70, 308.28) 
[Thu Jun 14 20:55:49 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 20:56:08 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 20:56:08 2012] Setting source spectrum file to fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Thu Jun 14 20:56:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Thu Jun 14 21:18:46 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 14 21:18:46 2012] rmf not generated due to insufficient counts
[Thu Jun 14 21:40:51 2012] Updating aperture counts using extracted products
[Thu Jun 14 21:40:51 2012] Error reading totcts from fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Thu Jun 14 21:40:52 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 21:40:52 2012] Using photon index=1.80, rate=0.00989, arf fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src26.arf
[Thu Jun 14 21:40:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 21:40:52 2012] Updating source flux to 3e-14
[Thu Jun 14 21:41:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 14 21:41:28 2012] xmm0084960101/analysis//spectral/fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete