[Thu Jun 14 10:40:12 2012] Detection parameters:
  Position = (283.7, 276.9) = 3 20 5.72 -62 28 51.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 162.5 +/- 23.2
  Background counts = 147.2
  Rate = 0.01 +/- 0.002

[Thu Jun 14 10:40:13 2012] Off-axis axis estimate = 1.89'
[Thu Jun 14 10:43:29 2012] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 10:43:29 2012] Initial guess for spatial extent in simple fitting = 7.37"
[Thu Jun 14 10:43:29 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.830
[Thu Jun 14 10:43:29 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 7.37"
[Thu Jun 14 15:20:10 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src23.ximg exists
[Thu Jun 14 15:20:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src23.csv
[Thu Jun 14 15:20:10 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src23_1.ximg exists
[Thu Jun 14 15:20:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src23.csv
[Thu Jun 14 15:20:10 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 15:20:12 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Thu Jun 14 15:20:12 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src23.csv
[Thu Jun 14 15:20:12 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Thu Jun 14 15:20:12 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src23.csv
[Thu Jun 14 15:20:12 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084960101_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 15:35:50 2012] Source 23 is offset by 2.353172 and 0.739163 pixels which is larger than
2 X fitted extent = 2.343766 x 2.343766, not incorporating fit results
[Thu Jun 14 15:35:50 2012] Source 23 is offset by -2.030053 and -5.289954 pixels which is larger than
2 X fitted extent = 1.277940 x 1.277940, not incorporating fit results
[Thu Jun 14 15:35:50 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 15:35:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 15:35:50 2012] Assessing source extent using major
[Thu Jun 14 15:35:50 2012] Source does appear to be extended
[Thu Jun 14 15:35:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 15:35:50 2012] Source is confused with source 26
[Thu Jun 14 15:35:50 2012] Source is confused with source 27
[Thu Jun 14 15:36:03 2012] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Thu Jun 14 15:36:03 2012] Initial guess for spatial extent in simple fitting = 7.37"
[Thu Jun 14 15:36:03 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.830
[Thu Jun 14 15:36:03 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 7.37"
[Thu Jun 14 20:31:33 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src23.ximg exists
[Thu Jun 14 20:31:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src23.csv
[Thu Jun 14 20:31:33 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src23_1.ximg exists
[Thu Jun 14 20:31:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src23.csv
[Thu Jun 14 20:31:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 20:31:35 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Thu Jun 14 20:31:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src23.csv
[Thu Jun 14 20:31:35 2012] fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Thu Jun 14 20:31:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src23.csv
[Thu Jun 14 20:31:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084960101_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 14 20:46:41 2012] Source 23 is offset by -2.669042 and -7.804322 pixels which is larger than
2 X fitted extent = 6.254759 x 6.254759, not incorporating fit results
[Thu Jun 14 20:46:41 2012] Warning, spatial fit 23 centroid is now closest to src. 26
[Thu Jun 14 20:46:41 2012] Vigneting correction estimate = 1.000000
[Thu Jun 14 20:46:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 14 20:46:41 2012] Assessing source extent using major
[Thu Jun 14 20:46:41 2012] Source does appear to be extended
[Thu Jun 14 20:46:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 14 20:46:54 2012] XMMSAS src. selection expression = ellipse(24637.439362, 24044.720001, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 14 20:46:54 2012] Writing source region out to fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src23_src.reg
[Thu Jun 14 20:46:54 2012] Extracting stamp from image fullrun_pn_xmm0084960101_pi300-10000_cl_sm2.00.img.gz, (246, 239) - (321, 314)
[Thu Jun 14 20:46:54 2012] XMMSAS bgd. selection expression = annulus(24637.439362, 24044.720001, 1087.500000, 2175.000000, X, Y) && !ellipse(27063.230774, 24311.826569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25443.445190, 24223.023804, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25882.979980, 24056.319824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26365.746613, 24055.833954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25739.356171, 23573.871796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24978.669037, 23571.214111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24462.640198, 23536.855377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23769.398773, 23487.153229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25290.210175, 22621.287109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26115.770000, 22529.159200, 411.180812, 411.180812, 0.000000, X, Y) && !ellipse(24236.771545, 22483.552155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26695.519836, 22320.063416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24676.879822, 22040.937531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24220.504181, 21967.820679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24675.239014, 21444.744064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24029.692535, 21270.894073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25163.565277, 21336.787918, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 14 20:46:54 2012] Writing fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src23.gif
[Thu Jun 14 20:54:34 2012] Mean detx,y = (-2845.54, 34.11) 
[Thu Jun 14 20:54:36 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 14 20:54:56 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 14 20:54:56 2012] Setting source spectrum file to fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Thu Jun 14 20:54:56 2012] Setting bgd. spectrum file to fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Thu Jun 14 21:18:28 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 14 21:18:28 2012] rmf not generated due to insufficient counts
[Thu Jun 14 21:40:51 2012] Updating aperture counts using extracted products
[Thu Jun 14 21:40:51 2012] Error reading totcts from fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Thu Jun 14 21:40:52 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 14 21:40:52 2012] Using photon index=1.80, rate=0.0115, arf fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src23.arf
[Thu Jun 14 21:40:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 14 21:40:52 2012] Updating source flux to 3.4e-14
[Thu Jun 14 21:41:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 14 21:41:28 2012] xmm0084960101/analysis//spectral/fullrun_pn_xmm0084960101_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete