[Mon May 28 06:52:27 2012] Detection parameters:
  Position = (303.1, 276.9) = 13 35 18.14 41 0 4.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2195.7 +/- 63.4
  Background counts = 197.1
  Rate = 0.1 +/- 0.003

[Mon May 28 06:52:28 2012] Off-axis axis estimate = 1.60'
[Mon May 28 06:54:21 2012] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Mon May 28 06:54:21 2012] Initial guess for spatial extent in simple fitting = 7.23"
[Mon May 28 06:54:21 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.856
[Mon May 28 06:54:21 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.23"
[Mon May 28 07:35:57 2012] fullrun_pn_xmm0084230901_pi300-10000_cl_pass0_src1.ximg exists
[Mon May 28 07:35:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230901_pi300-10000_cl_pass0_src1.csv
[Mon May 28 07:35:57 2012] fullrun_pn_xmm0084230901_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon May 28 07:35:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230901_pi300-10000_cl_pass0_src1.csv
[Mon May 28 07:35:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230901_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230901_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 07:35:58 2012] fullrun_pn_xmm0084230901_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon May 28 07:35:59 2012] fullrun_pn_xmm0084230901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon May 28 07:35:59 2012] Fit fullrun_pn_xmm0084230901_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon May 28 09:10:23 2012] Spatial fit model total counts = 5872.760000, observed total counts = 5791.000000
[Mon May 28 09:10:23 2012] Offset between fit and detection position for source 1 = 0.651064 pixels
[Mon May 28 09:10:23 2012] 5765.114000 total counts/ 4781.010000 bgd. counts: snr = 14.232499
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.651064 pixels
  Position = (303.8, 277.2) = 13 35 17.91 41 0 5.8
  Extent = 14.5 (14.4-28.9)", rotation angle = 0
  Source counts = 984.1 +/- 75.9
  Background counts = 4781.0
  Rate = 0.09 +/- 0.007
[Mon May 28 09:10:24 2012] Vigneting correction estimate = 1.000000
[Mon May 28 09:10:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 09:10:24 2012] Assessing source extent using major axis lower bound
[Mon May 28 09:10:24 2012] Source does appear to be extended
[Mon May 28 09:10:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 09:10:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 28 09:10:42 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 28 09:10:42 2012] Initial guess for spatial extent in simple fitting = 14.45"
[Mon May 28 09:10:42 2012] source mask rpix=3.3, npix_max = 58, mask sum = 64, frac = 1.095
[Mon May 28 09:10:42 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.45"
[Mon May 28 09:45:36 2012] fullrun_pn_xmm0084230901_pi300-10000_cl_pass1_src1.ximg exists
[Mon May 28 09:45:36 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0084230901_pi300-10000_cl_pass1_src1.csv
[Mon May 28 09:45:36 2012] fullrun_pn_xmm0084230901_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May 28 09:45:36 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0084230901_pi300-10000_cl_pass1_src1.csv
[Mon May 28 09:45:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230901_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230901_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 09:45:36 2012] fullrun_pn_xmm0084230901_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May 28 09:45:36 2012] fullrun_pn_xmm0084230901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 28 09:45:36 2012] Fit fullrun_pn_xmm0084230901_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon May 28 12:06:29 2012] Warning, spatial fit 1 centroid is now closest to src. 4
[Mon May 28 12:06:29 2012] Vigneting correction estimate = 1.000000
[Mon May 28 12:06:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 12:06:29 2012] Assessing source extent using major axis lower bound
[Mon May 28 12:06:29 2012] Source does appear to be extended
[Mon May 28 12:06:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 12:06:48 2012] XMMSAS src. selection expression = ellipse(26378.254200, 24063.841400, 867.192025, 867.192025, 0.000000, X, Y)
[Mon May 28 12:06:48 2012] Writing source region out to fullrun_pn_xmm0084230901_pi300-10000_pass1_cl_src1_src.reg
[Mon May 28 12:06:48 2012] Extracting stamp from image fullrun_pn_xmm0084230901_pi300-10000_cl_sm2.00.img.gz, (254, 227) - (354, 327)
[Mon May 28 12:06:48 2012] XMMSAS bgd. selection expression = annulus(26378.254200, 24063.841400, 1445.320042, 2890.640083, X, Y) && !ellipse(27027.419739, 23062.985748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26519.289612, 22255.883392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25187.144592, 25346.263153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26131.365936, 25895.623230, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23289.242000, 25341.882000, 1174.512034, 1174.512034, 0.000000, X, Y) && !ellipse(23888.713135, 25088.135895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23786.109528, 24137.823914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25186.332153, 22385.414307, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 28 12:06:48 2012] Writing fullrun_pn_xmm0084230901_pi300-10000_pass1_cl_src1.gif
[Mon May 28 12:06:54 2012] Mean detx,y = (-166.09, -231.53) 
[Mon May 28 12:06:56 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 12:07:32 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 12:07:33 2012] Setting source spectrum file to fullrun_pn_xmm0084230901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 28 12:07:33 2012] Setting bgd. spectrum file to fullrun_pn_xmm0084230901_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon May 28 16:40:06 2012] Updating aperture counts using extracted products
[Mon May 28 16:40:06 2012] Error reading totcts from fullrun_pn_xmm0084230901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 28 16:40:07 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 16:40:07 2012] Using photon index=1.80, rate=0.0932, arf fullrun_pn_xmm0084230901_pi300-10000_pass1_cl_src1.arf
[Mon May 28 16:40:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 16:40:07 2012] Updating source flux to 2.3e-13
[Mon May 28 16:42:18 2012] Reading fit data from xmm0084230901/analysis//spectral/fullrun_pn_xmm0084230901_pi300-10000_pass1_cl_src1_pl.csv
[Mon May 28 16:42:18 2012] Spectral fit parameter nH value = 3.15079e+20
[Mon May 28 16:42:18 2012] Spectral fit parameter PhoIndex value = 1.73787
[Mon May 28 16:42:18 2012] Failed to get F(0.3-8.0) from xmm0084230901/analysis//spectral/fullrun_pn_xmm0084230901_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon May 28 16:42:18 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 16:42:18 2012] Using Nh = 3.2e+20, photon index=1.74, rate=0.0932, arf fullrun_pn_xmm0084230901_pi300-10000_pass1_cl_src1.arf
[Mon May 28 16:42:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 16:42:18 2012] Updating source flux to 2.6e-13