[Mon May 28 06:52:58 2012] Detection parameters:
  Position = (293.4, 267.8) = 13 35 21.88 40 59 31.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 254.0 +/- 23.8
  Background counts = 109.8
  Rate = 0.01 +/- 0.001

[Mon May 28 06:52:59 2012] Off-axis axis estimate = 2.25'
[Mon May 28 08:19:45 2012] Using EEF radius (= 7.55 ")to estimate initial spatial extent for simple fitting
[Mon May 28 08:19:45 2012] Initial guess for spatial extent in simple fitting = 7.55"
[Mon May 28 08:19:45 2012] source mask rpix=1.7, npix_max = 20, mask sum = 19, frac = 0.949
[Mon May 28 08:19:45 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.55"
[Mon May 28 09:10:16 2012] fullrun_mos2_xmm0084230901_pi300-10000_cl_pass0_src5.ximg exists
[Mon May 28 09:10:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230901_pi300-10000_cl_pass0_src5.csv
[Mon May 28 09:10:16 2012] fullrun_mos2_xmm0084230901_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon May 28 09:10:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230901_pi300-10000_cl_pass0_src5.csv
[Mon May 28 09:10:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230901_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230901_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 09:10:17 2012] fullrun_mos2_xmm0084230901_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon May 28 09:10:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230901_pi300-10000_cl_pass0_tfrozen_src5.csv
[Mon May 28 09:10:17 2012] fullrun_mos2_xmm0084230901_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon May 28 09:10:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230901_pi300-10000_cl_pass0_tfrozen_src5.csv
[Mon May 28 09:10:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230901_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230901_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 09:10:34 2012] Spatial fit model total counts = 2021.860000, observed total counts = 1716.000000
[Mon May 28 09:10:34 2012] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 28 09:10:34 2012] Vigneting correction estimate = 1.000000
[Mon May 28 09:10:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 09:10:34 2012] Assessing source extent using major
[Mon May 28 09:10:34 2012] Source does appear to be extended
[Mon May 28 09:10:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 09:10:34 2012] Source is confused with source 10
[Mon May 28 11:01:26 2012] Using EEF radius (= 7.55 ")to estimate initial spatial extent for simple fitting
[Mon May 28 11:01:26 2012] Initial guess for spatial extent in simple fitting = 7.55"
[Mon May 28 11:01:26 2012] source mask rpix=1.7, npix_max = 20, mask sum = 19, frac = 0.949
[Mon May 28 11:01:26 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 7.55"
[Mon May 28 12:06:21 2012] fullrun_mos2_xmm0084230901_pi300-10000_cl_pass1_src5.ximg exists
[Mon May 28 12:06:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230901_pi300-10000_cl_pass1_src5.csv
[Mon May 28 12:06:21 2012] fullrun_mos2_xmm0084230901_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon May 28 12:06:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230901_pi300-10000_cl_pass1_src5.csv
[Mon May 28 12:06:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230901_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230901_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 12:06:21 2012] fullrun_mos2_xmm0084230901_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon May 28 12:06:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230901_pi300-10000_cl_pass1_tfrozen_src5.csv
[Mon May 28 12:06:21 2012] fullrun_mos2_xmm0084230901_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon May 28 12:06:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230901_pi300-10000_cl_pass1_tfrozen_src5.csv
[Mon May 28 12:06:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230901_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230901_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 12:06:40 2012] Source 11 is offset by 7.055235 and -6.879240 pixels which is larger than
2 X fitted extent = 0.831683 x 0.831683, not incorporating fit results
[Mon May 28 12:06:40 2012] Vigneting correction estimate = 1.000000
[Mon May 28 12:06:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 12:06:40 2012] Assessing source extent using major
[Mon May 28 12:06:40 2012] Source does appear to be extended
[Mon May 28 12:06:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 15:57:39 2012] XMMSAS src. selection expression = ellipse(25477.453461, 23247.858093, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 28 15:57:39 2012] Writing source region out to fullrun_mos2_xmm0084230901_pi300-10000_pass1_cl_src11_src.reg
[Mon May 28 15:57:39 2012] Extracting stamp from image fullrun_mos2_xmm0084230901_pi300-10000_cl_sm2.00.img.gz, (256, 230) - (331, 305)
[Mon May 28 15:57:39 2012] XMMSAS bgd. selection expression = annulus(25477.453461, 23247.858093, 1087.500000, 2175.000000, X, Y) && !ellipse(25856.732000, 24131.293800, 1997.520057, 1997.520057, 0.000000, X, Y) && !ellipse(26322.809800, 24165.851400, 1148.816033, 848.704024, 348.086000, X, Y) && !ellipse(25461.440000, 24187.949400, 2320.512067, 2320.512067, 0.000000, X, Y) && !ellipse(27976.871490, 24507.579224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24410.344086, 24696.325256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27349.745605, 23048.146790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24480.232422, 25360.629517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24153.239014, 23361.026062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24064.699097, 24307.437805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25695.996887, 25493.341156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26177.839569, 22483.541534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27795.657776, 24903.380371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23653.488159, 23712.703278, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 28 15:57:39 2012] Writing fullrun_mos2_xmm0084230901_pi300-10000_pass1_cl_src11.gif
[Mon May 28 16:17:04 2012] Mean detx,y = (-764.58, 115.16) 
[Mon May 28 16:17:05 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 16:17:12 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 16:17:12 2012] Setting source spectrum file to fullrun_mos2_xmm0084230901_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Mon May 28 16:17:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0084230901_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Mon May 28 16:37:19 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 28 16:37:19 2012] rmf not generated due to insufficient counts
[Mon May 28 16:40:08 2012] Updating aperture counts using extracted products
[Mon May 28 16:40:08 2012] Error reading totcts from fullrun_mos2_xmm0084230901_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Mon May 28 16:40:08 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 16:40:08 2012] Using photon index=1.80, rate=0.0114, arf fullrun_mos2_xmm0084230901_pi300-10000_pass1_cl_src11.arf
[Mon May 28 16:40:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 16:40:09 2012] Updating source flux to 1.2e-13
[Mon May 28 16:41:18 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting