[Mon May 28 06:52:58 2012] Detection parameters:
  Position = (289.2, 272.8) = 13 35 23.50 40 59 53.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 297.4 +/- 25.9
  Background counts = 110.4
  Rate = 0.01 +/- 0.001

[Mon May 28 06:52:59 2012] Off-axis axis estimate = 1.97'
[Mon May 28 08:19:45 2012] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Mon May 28 08:19:45 2012] Initial guess for spatial extent in simple fitting = 7.42"
[Mon May 28 08:19:45 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.823
[Mon May 28 08:19:45 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.42"
[Mon May 28 09:10:16 2012] fullrun_mos2_xmm0084230901_pi300-10000_cl_pass0_src4.ximg exists
[Mon May 28 09:10:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230901_pi300-10000_cl_pass0_src4.csv
[Mon May 28 09:10:16 2012] fullrun_mos2_xmm0084230901_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon May 28 09:10:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230901_pi300-10000_cl_pass0_src4.csv
[Mon May 28 09:10:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230901_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230901_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 09:10:17 2012] fullrun_mos2_xmm0084230901_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon May 28 09:10:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230901_pi300-10000_cl_pass0_tfrozen_src4.csv
[Mon May 28 09:10:17 2012] fullrun_mos2_xmm0084230901_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon May 28 09:10:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230901_pi300-10000_cl_pass0_tfrozen_src4.csv
[Mon May 28 09:10:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230901_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230901_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 09:10:34 2012] Source 10 is offset by -6.636752 and -1.800088 pixels which is larger than
2 X fitted extent = 4.728460 x 6.818851, not incorporating fit results
[Mon May 28 09:10:34 2012] Vigneting correction estimate = 1.000000
[Mon May 28 09:10:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 09:10:34 2012] Assessing source extent using major
[Mon May 28 09:10:34 2012] Source does appear to be extended
[Mon May 28 09:10:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 09:10:34 2012] Source is confused with source 11
[Mon May 28 11:01:26 2012] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Mon May 28 11:01:26 2012] Initial guess for spatial extent in simple fitting = 7.42"
[Mon May 28 11:01:26 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.823
[Mon May 28 11:01:26 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 7.42"
[Mon May 28 12:06:21 2012] fullrun_mos2_xmm0084230901_pi300-10000_cl_pass1_src4.ximg exists
[Mon May 28 12:06:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230901_pi300-10000_cl_pass1_src4.csv
[Mon May 28 12:06:21 2012] fullrun_mos2_xmm0084230901_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon May 28 12:06:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230901_pi300-10000_cl_pass1_src4.csv
[Mon May 28 12:06:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230901_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230901_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 12:06:21 2012] fullrun_mos2_xmm0084230901_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon May 28 12:06:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230901_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon May 28 12:06:21 2012] fullrun_mos2_xmm0084230901_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon May 28 12:06:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230901_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon May 28 12:06:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230901_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230901_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 12:06:40 2012] Spatial fit model total counts = 7616.920000, observed total counts = 6959.000000
[Mon May 28 12:06:40 2012] Offset between fit and detection position for source 10 = 7.022893 pixels
[Mon May 28 12:06:40 2012] Warning, changing simple spatial fit ID from 4 to 1
[Mon May 28 12:06:40 2012] 6893.410000 total counts/ 4640.260000 bgd. counts: snr = 33.076454
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 7.022893 pixels
  Position = (293.2, 278.6) = 13 35 21.96 41 0 12.0
  Extent = 29.0 (29.0-58.0)", rotation angle = 0
  Source counts = 2253.2 +/- 83.0
  Background counts = 4640.3
  Rate = 0.1 +/- 0.004
[Mon May 28 12:06:40 2012] Vigneting correction estimate = 1.000000
[Mon May 28 12:06:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 12:06:40 2012] Assessing source extent using major axis lower bound
[Mon May 28 12:06:40 2012] Source does appear to be extended
[Mon May 28 12:06:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 15:57:39 2012] Counts = 2253.150000, rescaling region sizes by 2.000000
[Mon May 28 15:57:39 2012] XMMSAS src. selection expression = ellipse(25461.440000, 24187.949400, 3480.768100, 3480.768100, 0.000000, X, Y)
[Mon May 28 15:57:39 2012] Writing source region out to fullrun_mos2_xmm0084230901_pi300-10000_pass1_cl_src10_src.reg
[Mon May 28 15:57:39 2012] Extracting stamp from image fullrun_mos2_xmm0084230901_pi300-10000_cl_sm2.00.img.gz, (93, 79) - (493, 479)
[Mon May 28 15:57:39 2012] XMMSAS bgd. selection expression = annulus(25461.440000, 24187.949400, 11602.560334, 23205.120668, X, Y) && !ellipse(25856.732000, 24131.293800, 1997.520057, 1997.520057, 0.000000, X, Y) && !ellipse(26322.809800, 24165.851400, 1148.816033, 848.704024, 348.086000, X, Y) && !ellipse(28732.159800, 29992.397200, 322.576009, 322.576009, 0.000000, X, Y) && !ellipse(25477.453461, 23247.858093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27976.871490, 24507.579224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24410.344086, 24696.325256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20911.663660, 26790.567400, 302.743209, 302.743209, 0.000000, X, Y) && !ellipse(27349.745605, 23048.146790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27104.132200, 17345.636800, 687.211220, 687.211220, 0.000000, X, Y) && !ellipse(15296.799377, 24240.562927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25858.091736, 16173.163483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19360.939200, 39685.294200, 580.998417, 580.998417, 0.000000, X, Y) && !ellipse(24480.232422, 25360.629517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24153.239014, 23361.026062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24064.699097, 24307.437805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25695.996887, 25493.341156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26177.839569, 22483.541534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27795.657776, 24903.380371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29041.514343, 29209.614868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16529.560400, 12233.893600, 688.290372, 688.290372, 0.000000, X, Y) && !ellipse(24810.257874, 39056.794617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23653.488159, 23712.703278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29694.771027, 10836.809479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40415.471344, 32084.618652, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 28 15:57:39 2012] Writing fullrun_mos2_xmm0084230901_pi300-10000_pass1_cl_src10.gif
[Mon May 28 16:07:00 2012] Mean detx,y = (-62.67, -391.16) 
[Mon May 28 16:07:01 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 16:17:01 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 16:17:01 2012] Setting source spectrum file to fullrun_mos2_xmm0084230901_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon May 28 16:17:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0084230901_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Mon May 28 16:40:08 2012] Updating aperture counts using extracted products
[Mon May 28 16:40:08 2012] Error reading totcts from fullrun_mos2_xmm0084230901_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon May 28 16:40:08 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 16:40:08 2012] Using photon index=1.80, rate=0.113, arf fullrun_mos2_xmm0084230901_pi300-10000_pass1_cl_src10.arf
[Mon May 28 16:40:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 16:40:08 2012] Updating source flux to 9.8e-13
[Mon May 28 16:41:18 2012] Flag b found in src. 10 procflags, skipping spectral fitting
[Mon May 28 16:41:18 2012] Flag c found in src. 10 procflags, skipping spectral fitting