[Mon May 28 06:52:58 2012] Detection parameters:
  Position = (299.9, 275.8) = 13 35 19.38 41 0 0.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 884.7 +/- 40.8
  Background counts = 113.8
  Rate = 0.04 +/- 0.002

[Mon May 28 06:52:59 2012] Off-axis axis estimate = 1.65'
[Mon May 28 08:19:45 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Mon May 28 08:19:45 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Mon May 28 08:19:45 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.852
[Mon May 28 08:19:45 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Mon May 28 09:10:16 2012] fullrun_mos2_xmm0084230901_pi300-10000_cl_pass0_src1.ximg exists
[Mon May 28 09:10:16 2012] fullrun_mos2_xmm0084230901_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon May 28 09:10:16 2012] Fit fullrun_mos2_xmm0084230901_pi300-10000_cl_pass0_src1 appears to have run properly
[Mon May 28 09:10:17 2012] fullrun_mos2_xmm0084230901_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon May 28 09:10:17 2012] fullrun_mos2_xmm0084230901_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon May 28 09:10:17 2012] Fit fullrun_mos2_xmm0084230901_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon May 28 09:10:34 2012] Spatial fit model total counts = 3616.150000, observed total counts = 3341.000000
[Mon May 28 09:10:34 2012] Offset between fit and detection position for source 1 = 1.424164 pixels
[Mon May 28 09:10:34 2012] 3563.768000 total counts/ 2904.390000 bgd. counts: snr = 12.235085
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.424164 pixels
  Position = (299.1, 277.0) = 13 35 19.68 41 0 5.0
  Extent = 14.5 (14.4-29.0)", rotation angle = 0
  Source counts = 659.4 +/- 59.7
  Background counts = 2904.4
  Rate = 0.03 +/- 0.003
[Mon May 28 09:10:34 2012] Vigneting correction estimate = 1.000000
[Mon May 28 09:10:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 09:10:34 2012] Assessing source extent using major axis lower bound
[Mon May 28 09:10:34 2012] Source does appear to be extended
[Mon May 28 09:10:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 09:10:34 2012] Source is confused with source 2
[Mon May 28 11:01:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 28 11:01:26 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 28 11:01:26 2012] Initial guess for spatial extent in simple fitting = 14.50"
[Mon May 28 11:01:26 2012] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.952
[Mon May 28 11:01:26 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.50"
[Mon May 28 12:06:21 2012] fullrun_mos2_xmm0084230901_pi300-10000_cl_pass1_src1.ximg exists
[Mon May 28 12:06:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230901_pi300-10000_cl_pass1_src1.csv
[Mon May 28 12:06:21 2012] fullrun_mos2_xmm0084230901_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May 28 12:06:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0084230901_pi300-10000_cl_pass1_src1.csv
[Mon May 28 12:06:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0084230901_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0084230901_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 12:06:21 2012] fullrun_mos2_xmm0084230901_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May 28 12:06:21 2012] fullrun_mos2_xmm0084230901_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 28 12:06:21 2012] Fit fullrun_mos2_xmm0084230901_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon May 28 12:06:40 2012] Warning, spatial fit 1 centroid is now closest to src. 10
[Mon May 28 12:06:40 2012] Spatial fit model total counts = 3963.420000, observed total counts = 3778.000000
[Mon May 28 12:06:40 2012] Offset between fit and detection position for source 1 = 1.676498 pixels
[Mon May 28 12:06:40 2012] Warning, changing simple spatial fit ID from 1 to 2
[Mon May 28 12:06:40 2012] 4009.580000 total counts/ 1557.260000 bgd. counts: snr = 62.143624
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.676498 pixels
  Position = (297.8, 277.9) = 13 35 20.21 41 0 9.2
  Extent = 25.0 (24.9-49.9)", rotation angle = 0
  Source counts = 2452.3 +/- 63.3
  Background counts = 1557.3
  Rate = 0.1 +/- 0.003
[Mon May 28 12:06:40 2012] Vigneting correction estimate = 1.000000
[Mon May 28 12:06:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 12:06:40 2012] Assessing source extent using major axis lower bound
[Mon May 28 12:06:40 2012] Source does appear to be extended
[Mon May 28 12:06:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 15:57:39 2012] Counts = 2452.320000, rescaling region sizes by 2.000000
[Mon May 28 15:57:39 2012] XMMSAS src. selection expression = ellipse(25856.732000, 24131.293800, 2996.280086, 2996.280086, 0.000000, X, Y)
[Mon May 28 15:57:39 2012] Writing source region out to fullrun_mos2_xmm0084230901_pi300-10000_pass1_cl_src1_src.reg
[Mon May 28 15:57:39 2012] Extracting stamp from image fullrun_mos2_xmm0084230901_pi300-10000_cl_sm2.00.img.gz, (126, 106) - (470, 450)
[Mon May 28 15:57:39 2012] XMMSAS bgd. selection expression = annulus(25856.732000, 24131.293800, 9987.600287, 19975.200575, X, Y) && !ellipse(26322.809800, 24165.851400, 1148.816033, 848.704024, 348.086000, X, Y) && !ellipse(28732.159800, 29992.397200, 322.576009, 322.576009, 0.000000, X, Y) && !ellipse(25461.440000, 24187.949400, 2320.512067, 2320.512067, 0.000000, X, Y) && !ellipse(25477.453461, 23247.858093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27976.871490, 24507.579224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24410.344086, 24696.325256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20911.663660, 26790.567400, 302.743209, 302.743209, 0.000000, X, Y) && !ellipse(27349.745605, 23048.146790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27104.132200, 17345.636800, 687.211220, 687.211220, 0.000000, X, Y) && !ellipse(15296.799377, 24240.562927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25858.091736, 16173.163483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19360.939200, 39685.294200, 580.998417, 580.998417, 0.000000, X, Y) && !ellipse(24480.232422, 25360.629517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24153.239014, 23361.026062, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24064.699097, 24307.437805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25695.996887, 25493.341156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26177.839569, 22483.541534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27795.657776, 24903.380371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29041.514343, 29209.614868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16529.560400, 12233.893600, 688.290372, 688.290372, 0.000000, X, Y) && !ellipse(24810.257874, 39056.794617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23653.488159, 23712.703278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29694.771027, 10836.809479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40415.471344, 32084.618652, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 28 15:57:39 2012] Writing fullrun_mos2_xmm0084230901_pi300-10000_pass1_cl_src1.gif
[Mon May 28 15:57:44 2012] Mean detx,y = (46.95, -240.61) 
[Mon May 28 15:57:46 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 16:06:31 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 16:06:31 2012] Setting source spectrum file to fullrun_mos2_xmm0084230901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 28 16:06:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0084230901_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon May 28 16:40:08 2012] Updating aperture counts using extracted products
[Mon May 28 16:40:08 2012] Error reading totcts from fullrun_mos2_xmm0084230901_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 28 16:40:08 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 16:40:08 2012] Using photon index=1.80, rate=0.123, arf fullrun_mos2_xmm0084230901_pi300-10000_pass1_cl_src1.arf
[Mon May 28 16:40:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 16:40:08 2012] Updating source flux to 1.1e-12
[Mon May 28 16:41:18 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Mon May 28 16:41:57 2012] Reading fit data from xmm0084230901/analysis//spectral/fullrun_mos2_xmm0084230901_pi300-10000_pass1_cl_src1_pl.csv
[Mon May 28 16:41:57 2012] Spectral fit parameter nH value = 3.59594e+20
[Mon May 28 16:41:57 2012] Spectral fit parameter PhoIndex value = 1.74712
[Mon May 28 16:41:57 2012] Failed to get F(0.3-8.0) from xmm0084230901/analysis//spectral/fullrun_mos2_xmm0084230901_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon May 28 16:41:57 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 16:41:57 2012] Using Nh = 3.6e+20, photon index=1.75, rate=0.123, arf fullrun_mos2_xmm0084230901_pi300-10000_pass1_cl_src1.arf
[Mon May 28 16:41:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 16:41:57 2012] Updating source flux to 1.1e-12