[Mon May 28 06:52:43 2012] Detection parameters: Position = (312.0, 268.2) = 13 35 14.74 40 59 27.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 311.3 +/- 28.8 Background counts = 113.7 Rate = 0.01 +/- 0.001 [Mon May 28 06:52:43 2012] Off-axis axis estimate = 2.40' [Mon May 28 07:35:59 2012] Using EEF radius (= 7.63 ")to estimate initial spatial extent for simple fitting [Mon May 28 07:35:59 2012] Initial guess for spatial extent in simple fitting = 7.63" [Mon May 28 07:35:59 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.787 [Mon May 28 07:35:59 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.63" [Mon May 28 08:19:44 2012] fullrun_mos1_xmm0084230901_pi300-10000_cl_pass0_src5.ximg exists [Mon May 28 08:19:44 2012] fullrun_mos1_xmm0084230901_pi300-10000_cl_pass0_src5_1.ximg exists [Mon May 28 08:19:44 2012] Fit fullrun_mos1_xmm0084230901_pi300-10000_cl_pass0_src5 appears to have run properly [Mon May 28 08:19:44 2012] fullrun_mos1_xmm0084230901_pi300-10000_cl_pass0_tfrozen_src5.ximg exists [Mon May 28 08:19:44 2012] fullrun_mos1_xmm0084230901_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists [Mon May 28 08:19:44 2012] Fit fullrun_mos1_xmm0084230901_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly [Mon May 28 09:10:28 2012] Spatial fit model total counts = 2062.640000, observed total counts = 2051.000000 [Mon May 28 09:10:28 2012] Offset between fit and detection position for source 18 = 7.067533 pixels [Mon May 28 09:10:28 2012] 2051.874000 total counts/ 1636.190000 bgd. counts: snr = 10.276529 Spatial fit parameters: Offset between fit and detection position for source 18 = 7.067533 pixels Position = (307.5, 273.6) = 13 35 16.48 40 59 50.5 Extent = 15.3 (15.2-30.5)", rotation angle = 0 Source counts = 415.7 +/- 45.3 Background counts = 1636.2 Rate = 0.02 +/- 0.002 [Mon May 28 09:10:29 2012] Vigneting correction estimate = 1.000000 [Mon May 28 09:10:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 28 09:10:29 2012] Assessing source extent using major axis lower bound [Mon May 28 09:10:29 2012] Source does appear to be extended [Mon May 28 09:10:29 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 28 09:10:29 2012] Source is confused with source 1 [Mon May 28 09:45:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Mon May 28 09:45:36 2012] Initial guess for spatial extent in simple fitting = 15.26" [Mon May 28 09:45:36 2012] source mask rpix=3.5, npix_max = 64, mask sum = 64, frac = 0.996 [Mon May 28 09:45:36 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 15.26" [Mon May 28 11:01:25 2012] fullrun_mos1_xmm0084230901_pi300-10000_cl_pass1_src5.ximg exists [Mon May 28 11:01:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230901_pi300-10000_cl_pass1_src5.csv [Mon May 28 11:01:25 2012] fullrun_mos1_xmm0084230901_pi300-10000_cl_pass1_src5_1.ximg exists [Mon May 28 11:01:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230901_pi300-10000_cl_pass1_src5.csv [Mon May 28 11:01:25 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0084230901_pi300-10000_cl_pass1_src5_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0084230901_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 28 11:01:25 2012] fullrun_mos1_xmm0084230901_pi300-10000_cl_pass1_tfrozen_src5.ximg exists [Mon May 28 11:01:25 2012] fullrun_mos1_xmm0084230901_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists [Mon May 28 11:01:25 2012] Fit fullrun_mos1_xmm0084230901_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly [Mon May 28 12:06:35 2012] Spatial fit model total counts = 6789.820000, observed total counts = 6792.000000 [Mon May 28 12:06:35 2012] Offset between fit and detection position for source 18 = 2.268896 pixels [Mon May 28 12:06:35 2012] Warning, changing simple spatial fit ID from 5 to 1 [Mon May 28 12:06:35 2012] 6370.780000 total counts/ 3130.270000 bgd. counts: snr = 57.919188 Spatial fit parameters: Offset between fit and detection position for source 18 = 2.268896 pixels Position = (305.8, 275.2) = 13 35 17.10 40 59 57.4 Extent = 28.8 (28.8-57.7)", rotation angle = 0 Source counts = 3240.5 +/- 79.8 Background counts = 3130.3 Rate = 0.2 +/- 0.004 [Mon May 28 12:06:35 2012] Vigneting correction estimate = 1.000000 [Mon May 28 12:06:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 28 12:06:35 2012] Assessing source extent using major axis lower bound [Mon May 28 12:06:35 2012] Source does appear to be extended [Mon May 28 12:06:35 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 28 12:56:04 2012] Counts = 3240.510000, rescaling region sizes by 2.000000 [Mon May 28 12:56:04 2012] XMMSAS src. selection expression = ellipse(26559.874000, 23895.898400, 3460.224100, 3460.224100, 0.000000, X, Y) [Mon May 28 12:56:04 2012] Writing source region out to fullrun_mos1_xmm0084230901_pi300-10000_pass1_cl_src18_src.reg [Mon May 28 12:56:04 2012] Extracting stamp from image fullrun_mos1_xmm0084230901_pi300-10000_cl_sm2.00.img.gz, (107, 76) - (505, 474) [Mon May 28 12:56:04 2012] XMMSAS bgd. selection expression = annulus(26559.874000, 23895.898400, 11534.080332, 23068.160664, X, Y) && !ellipse(26308.270000, 23962.806000, 2199.832063, 1515.536044, 354.380000, X, Y) && !ellipse(28718.439800, 29959.476000, 430.972812, 430.972812, 0.000000, X, Y) && !ellipse(25945.610000, 23883.198800, 1180.216034, 1180.216034, 0.000000, X, Y) && !ellipse(26133.774000, 23368.006000, 1245.016036, 1245.016036, 0.000000, X, Y) && !ellipse(24722.288788, 24653.138550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24186.694000, 24010.315200, 1193.616034, 1193.616034, 0.000000, X, Y) && !ellipse(25528.136000, 24632.830000, 1097.336032, 1097.336032, 0.000000, X, Y) && !ellipse(20921.784217, 26807.053613, 440.128571, 368.317768, 96.144224, X, Y) && !ellipse(27067.975400, 17358.658800, 692.741620, 360.463210, 196.386000, X, Y) && !ellipse(25311.312000, 22237.102000, 1245.016036, 1245.016036, 0.000000, X, Y) && !ellipse(19310.538589, 39654.587738, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26422.128815, 22349.066956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26946.528961, 25092.678650, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25876.180450, 25728.738708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24401.970123, 25441.199036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24660.798309, 22719.560364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22535.219025, 35286.079529, 870.000000, 870.000000, 0.000000, X, Y) [Mon May 28 12:56:04 2012] Writing fullrun_mos1_xmm0084230901_pi300-10000_pass1_cl_src18.gif [Mon May 28 13:04:55 2012] Mean detx,y = (268.69, -350.27) [Mon May 28 13:04:57 2012] Setting backscal keywords in source and bgd. spectrum [Mon May 28 13:13:57 2012] Binned source spectrum to 10 counts/bin [Mon May 28 13:13:57 2012] Setting source spectrum file to fullrun_mos1_xmm0084230901_pi300-10000_pass1_cl_src18_src_b10.pi.gz [Mon May 28 13:13:57 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0084230901_pi300-10000_pass1_cl_src18_bgd.pi.gz [Mon May 28 16:40:07 2012] Updating aperture counts using extracted products [Mon May 28 16:40:07 2012] Error reading totcts from fullrun_mos1_xmm0084230901_pi300-10000_pass1_cl_src18_src_b10.pi.gz [Mon May 28 16:40:08 2012] Calculating source flux in energy range 0.30-8.00 [Mon May 28 16:40:08 2012] Using photon index=1.80, rate=0.176, arf fullrun_mos1_xmm0084230901_pi300-10000_pass1_cl_src18.arf [Mon May 28 16:40:08 2012] Assuming count rate is from the 0.30-10.00 bandpass [Mon May 28 16:40:08 2012] Updating source flux to 1.5e-12 [Mon May 28 16:40:10 2012] Flag c found in src. 18 procflags, skipping spectral fitting