[Mon May 28 06:52:43 2012] Detection parameters:
  Position = (280.9, 271.2) = 13 35 26.67 40 59 39.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 109.9 +/- 20.8
  Background counts = 100.8
  Rate = 0.004 +/- 0.0008

[Mon May 28 06:52:43 2012] Off-axis axis estimate = 2.34'
[Mon May 28 07:35:59 2012] Using EEF radius (= 7.60 ")to estimate initial spatial extent for simple fitting
[Mon May 28 07:35:59 2012] Initial guess for spatial extent in simple fitting = 7.60"
[Mon May 28 07:35:59 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.792
[Mon May 28 07:35:59 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 7.60"
[Mon May 28 08:19:44 2012] fullrun_mos1_xmm0084230901_pi300-10000_cl_pass0_src15.ximg exists
[Mon May 28 08:19:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230901_pi300-10000_cl_pass0_src15.csv
[Mon May 28 08:19:44 2012] fullrun_mos1_xmm0084230901_pi300-10000_cl_pass0_src15_1.ximg exists
[Mon May 28 08:19:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230901_pi300-10000_cl_pass0_src15.csv
[Mon May 28 08:19:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084230901_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084230901_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 08:19:44 2012] fullrun_mos1_xmm0084230901_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Mon May 28 08:19:44 2012] fullrun_mos1_xmm0084230901_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Mon May 28 08:19:44 2012] Fit fullrun_mos1_xmm0084230901_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Mon May 28 09:10:28 2012] Source 17 is offset by 6.920714 and 4.600547 pixels which is larger than
2 X fitted extent = 1.686363 x 1.686363, not incorporating fit results
[Mon May 28 09:10:29 2012] Source 17 is offset by -6.749630 and 1.226823 pixels which is larger than
2 X fitted extent = 5.333747 x 5.333747, not incorporating fit results
[Mon May 28 09:10:29 2012] Vigneting correction estimate = 1.000000
[Mon May 28 09:10:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 09:10:29 2012] Assessing source extent using major
[Mon May 28 09:10:29 2012] Source does appear to be extended
[Mon May 28 09:10:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 09:10:29 2012] Source is confused with source 16
[Mon May 28 09:45:36 2012] Using EEF radius (= 7.60 ")to estimate initial spatial extent for simple fitting
[Mon May 28 09:45:36 2012] Initial guess for spatial extent in simple fitting = 7.60"
[Mon May 28 09:45:36 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.792
[Mon May 28 09:45:36 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 7.60"
[Mon May 28 11:01:25 2012] fullrun_mos1_xmm0084230901_pi300-10000_cl_pass1_src15.ximg exists
[Mon May 28 11:01:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230901_pi300-10000_cl_pass1_src15.csv
[Mon May 28 11:01:25 2012] fullrun_mos1_xmm0084230901_pi300-10000_cl_pass1_src15_1.ximg exists
[Mon May 28 11:01:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230901_pi300-10000_cl_pass1_src15.csv
[Mon May 28 11:01:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084230901_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084230901_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 11:01:26 2012] fullrun_mos1_xmm0084230901_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Mon May 28 11:01:26 2012] fullrun_mos1_xmm0084230901_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Mon May 28 11:01:26 2012] Fit fullrun_mos1_xmm0084230901_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Mon May 28 12:06:35 2012] Spatial fit model total counts = 1706.320000, observed total counts = 1706.000000
[Mon May 28 12:06:35 2012] Offset between fit and detection position for source 17 = 7.028777 pixels
[Mon May 28 12:06:35 2012] Warning, changing simple spatial fit ID from 15 to 7
[Mon May 28 12:06:35 2012] 1683.054000 total counts/ 1116.120000 bgd. counts: snr = 16.969813
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 7.028777 pixels
  Position = (285.2, 276.9) = 13 35 25.05 41 0 4.5
  Extent = 29.8 (29.8-59.7)", rotation angle = 0
  Source counts = 566.9 +/- 41.0
  Background counts = 1116.1
  Rate = 0.03 +/- 0.002
[Mon May 28 12:06:35 2012] Spatial fit model total counts = 1114.810000, observed total counts = 1113.000000
[Mon May 28 12:06:35 2012] Offset between fit and detection position for source 17 = 0.560715 pixels
[Mon May 28 12:06:35 2012] Warning, changing simple spatial fit ID from 7 to 15
[Mon May 28 12:06:35 2012] 1147.945600 total counts/ 1134.580000 bgd. counts: snr = 0.396799
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.560715 pixels
  Position = (285.6, 276.5) = 13 35 24.88 41 0 3.1
  Extent = 1.9 (1.9-3.5)", rotation angle = 0
  Source counts = 13.4 +/- 33.9
  Background counts = 1134.6
  Rate = 0.0007 +/- 0.002
  Deleting source due to low Poisson probability