[Mon May 28 06:52:42 2012] Detection parameters:
  Position = (310.3, 289.0) = 13 35 15.39 41 0 51.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.5 +/- 19.6
  Background counts = 107.2
  Rate = 0.004 +/- 0.0008

[Mon May 28 06:52:43 2012] Off-axis axis estimate = 1.10'
[Mon May 28 07:35:59 2012] Using EEF radius (= 6.98 ")to estimate initial spatial extent for simple fitting
[Mon May 28 07:35:59 2012] Initial guess for spatial extent in simple fitting = 6.98"
[Mon May 28 07:35:59 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.903
[Mon May 28 07:35:59 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 6.98"
[Mon May 28 08:19:44 2012] fullrun_mos1_xmm0084230901_pi300-10000_cl_pass0_src17.ximg exists
[Mon May 28 08:19:44 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0084230901_pi300-10000_cl_pass0_src17.csv
[Mon May 28 08:19:44 2012] fullrun_mos1_xmm0084230901_pi300-10000_cl_pass0_src17_1.ximg exists
[Mon May 28 08:19:44 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0084230901_pi300-10000_cl_pass0_src17.csv
[Mon May 28 08:19:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084230901_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084230901_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 08:19:44 2012] fullrun_mos1_xmm0084230901_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Mon May 28 08:19:44 2012] fullrun_mos1_xmm0084230901_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Mon May 28 08:19:44 2012] Fit fullrun_mos1_xmm0084230901_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Mon May 28 09:10:28 2012] Source 11 is offset by -6.025713 and -6.936521 pixels which is larger than
2 X fitted extent = 2.000285 x 2.000285, not incorporating fit results
[Mon May 28 09:10:29 2012] Vigneting correction estimate = 1.000000
[Mon May 28 09:10:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 09:10:29 2012] Assessing source extent using major
[Mon May 28 09:10:29 2012] Source does appear to be extended
[Mon May 28 09:10:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 09:45:36 2012] Using EEF radius (= 6.98 ")to estimate initial spatial extent for simple fitting
[Mon May 28 09:45:36 2012] Initial guess for spatial extent in simple fitting = 6.98"
[Mon May 28 09:45:36 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.903
[Mon May 28 09:45:36 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 6.98"
[Mon May 28 11:01:25 2012] fullrun_mos1_xmm0084230901_pi300-10000_cl_pass1_src17.ximg exists
[Mon May 28 11:01:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230901_pi300-10000_cl_pass1_src17.csv
[Mon May 28 11:01:25 2012] fullrun_mos1_xmm0084230901_pi300-10000_cl_pass1_src17_1.ximg exists
[Mon May 28 11:01:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0084230901_pi300-10000_cl_pass1_src17.csv
[Mon May 28 11:01:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0084230901_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0084230901_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 11:01:26 2012] fullrun_mos1_xmm0084230901_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Mon May 28 11:01:26 2012] fullrun_mos1_xmm0084230901_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Mon May 28 11:01:26 2012] Fit fullrun_mos1_xmm0084230901_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Mon May 28 12:06:35 2012] Source 11 is offset by -1.778012 and -0.086636 pixels which is larger than
2 X fitted extent = 1.695715 x 1.695715, not incorporating fit results
[Mon May 28 12:06:35 2012] Source 11 is offset by -6.129046 and -6.891211 pixels which is larger than
2 X fitted extent = 3.121646 x 3.121646, not incorporating fit results
[Mon May 28 12:06:35 2012] Vigneting correction estimate = 1.000000
[Mon May 28 12:06:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 12:06:35 2012] Assessing source extent using major
[Mon May 28 12:06:35 2012] Source does appear to be extended
[Mon May 28 12:06:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 12:06:35 2012] Source is confused with source 1
[Mon May 28 12:06:35 2012] Source is confused with source 18
[Mon May 28 12:56:04 2012] XMMSAS src. selection expression = ellipse(26946.528961, 25092.678650, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 28 12:56:04 2012] Writing source region out to fullrun_mos1_xmm0084230901_pi300-10000_pass1_cl_src11_src.reg
[Mon May 28 12:56:04 2012] Extracting stamp from image fullrun_mos1_xmm0084230901_pi300-10000_cl_sm2.00.img.gz, (273, 251) - (348, 326)
[Mon May 28 12:56:04 2012] XMMSAS bgd. selection expression = annulus(26946.528961, 25092.678650, 1087.500000, 2175.000000, X, Y) && !ellipse(26308.270000, 23962.806000, 2199.832063, 1515.536044, 354.380000, X, Y) && !ellipse(25945.610000, 23883.198800, 1180.216034, 1180.216034, 0.000000, X, Y) && !ellipse(26133.774000, 23368.006000, 1245.016036, 1245.016036, 0.000000, X, Y) && !ellipse(26559.874000, 23895.898400, 2306.816066, 2306.816066, 0.000000, X, Y) && !ellipse(24722.288788, 24653.138550, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24186.694000, 24010.315200, 1193.616034, 1193.616034, 0.000000, X, Y) && !ellipse(25528.136000, 24632.830000, 1097.336032, 1097.336032, 0.000000, X, Y) && !ellipse(25311.312000, 22237.102000, 1245.016036, 1245.016036, 0.000000, X, Y) && !ellipse(26422.128815, 22349.066956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25876.180450, 25728.738708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24401.970123, 25441.199036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24660.798309, 22719.560364, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 28 12:56:04 2012] Writing fullrun_mos1_xmm0084230901_pi300-10000_pass1_cl_src11.gif
[Mon May 28 13:15:53 2012] Mean detx,y = (-38.87, -1496.76) 
[Mon May 28 13:15:54 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 13:16:03 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 13:16:03 2012] Setting source spectrum file to fullrun_mos1_xmm0084230901_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Mon May 28 13:16:03 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0084230901_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Mon May 28 15:57:15 2012] Not generating rmf since there are only 89 counts
[Mon May 28 15:57:15 2012] rmf not generated due to insufficient counts
[Mon May 28 16:40:08 2012] Updating aperture counts using extracted products
[Mon May 28 16:40:08 2012] Error reading totcts from fullrun_mos1_xmm0084230901_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Mon May 28 16:40:08 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 16:40:08 2012] Using photon index=1.80, rate=0.00361, arf fullrun_mos1_xmm0084230901_pi300-10000_pass1_cl_src11.arf
[Mon May 28 16:40:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 16:40:08 2012] Updating source flux to 3.7e-14
[Mon May 28 16:40:10 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting