[Sat May 4 06:28:09 2013] Detection parameters: Position = (305.1, 297.8) = 10 17 0.58 39 4 33.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 1946.1 +/- 54.7 Background counts = 64.6 Rate = 0.1 +/- 0.003 [Sat May 4 06:28:10 2013] Off-axis axis estimate = 0.48' [Sat May 4 06:30:31 2013] Using EEF radius (= 6.67 ")to estimate initial spatial extent for simple fitting [Sat May 4 06:30:31 2013] Initial guess for spatial extent in simple fitting = 6.67" [Sat May 4 06:30:31 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.967 [Sat May 4 06:30:31 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 6.67" [Sat May 4 07:41:41 2013] fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_src6.ximg exists [Sat May 4 07:41:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_src6.csv [Sat May 4 07:41:41 2013] fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_src6_1.ximg exists [Sat May 4 07:41:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_src6.csv [Sat May 4 07:41:41 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_src6_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 07:41:42 2013] fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_tfrozen_src6.ximg exists [Sat May 4 07:41:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_tfrozen_src6.csv [Sat May 4 07:41:42 2013] fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists [Sat May 4 07:41:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_tfrozen_src6.csv [Sat May 4 07:41:42 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_tfrozen_src6_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 11:23:29 2013] Source 6 is offset by -6.048909 and -7.300496 pixels which is larger than 2 X fitted extent = 0.766731 x 0.766731, not incorporating fit results [Sat May 4 11:23:29 2013] Vigneting correction estimate = 1.000000 [Sat May 4 11:23:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 4 11:23:29 2013] Assessing source extent using major [Sat May 4 11:23:29 2013] Source does appear to be extended [Sat May 4 11:23:29 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 4 11:23:58 2013] Using EEF radius (= 6.67 ")to estimate initial spatial extent for simple fitting [Sat May 4 11:23:58 2013] Initial guess for spatial extent in simple fitting = 6.67" [Sat May 4 11:23:58 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.967 [Sat May 4 11:23:58 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 6.67" [Sat May 4 12:23:47 2013] fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_src6.ximg exists [Sat May 4 12:23:47 2013] fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_src6_1.ximg exists [Sat May 4 12:23:47 2013] Fit fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_src6 appears to have run properly [Sat May 4 12:23:48 2013] fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_tfrozen_src6.ximg exists [Sat May 4 12:23:48 2013] fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists [Sat May 4 12:23:48 2013] Fit fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly [Sat May 4 14:38:22 2013] Spatial fit model total counts = 3601.120000, observed total counts = 3493.000000 [Sat May 4 14:38:22 2013] Offset between fit and detection position for source 6 = 0.162866 pixels [Sat May 4 14:38:22 2013] 3468.420000 total counts/ 2333.350000 bgd. counts: snr = 23.498098 Spatial fit parameters: Offset between fit and detection position for source 6 = 0.162866 pixels Position = (304.9, 297.8) = 10 17 0.64 39 4 33.2 Extent = 5.2 (4.9-5.5)", rotation angle = 0 Source counts = 1135.1 +/- 58.9 Background counts = 2333.3 Rate = 0.05 +/- 0.003 [Sat May 4 14:38:22 2013] Vigneting correction estimate = 1.000000 [Sat May 4 14:38:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 4 14:38:22 2013] Assessing source extent using major axis lower bound [Sat May 4 14:38:22 2013] Source does appear to be extended [Sat May 4 14:38:22 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 4 14:38:45 2013] Counts = 1135.070000, rescaling region sizes by 2.000000 [Sat May 4 14:38:45 2013] XMMSAS src. selection expression = ellipse(26480.695060, 25857.834600, 621.052818, 621.052818, 0.000000, X, Y) [Sat May 4 14:38:45 2013] Writing source region out to fullrun_pn_xmm0084230701_pi300-10000_pass1_cl_src6_src.reg [Sat May 4 14:38:45 2013] Extracting stamp from image fullrun_pn_xmm0084230701_pi300-10000_cl_sm2.00.img.gz, (269, 262) - (341, 333) [Sat May 4 14:38:45 2013] XMMSAS bgd. selection expression = annulus(26480.695060, 25857.834600, 2070.176060, 4140.352119, X, Y) && !ellipse(25800.095000, 23841.730600, 1165.000034, 1082.696031, 91.849680, X, Y) && !ellipse(26917.477631, 23058.472198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26370.836304, 22734.842712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25693.668427, 22247.817413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24356.285034, 26112.260345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23129.178000, 25760.080000, 1180.824034, 1180.824034, 0.000000, X, Y) && !ellipse(23116.696991, 23341.673553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28222.243988, 23089.225403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23687.095520, 22735.209106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23572.000000, 22239.130157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24745.254791, 21454.486694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25591.948944, 20933.496933, 870.000000, 870.000000, 0.000000, X, Y) [Sat May 4 14:38:45 2013] Writing fullrun_pn_xmm0084230701_pi300-10000_pass1_cl_src6.gif [Sat May 4 14:44:23 2013] Mean detx,y = (-1467.95, 1093.16) [Sat May 4 14:44:25 2013] Setting backscal keywords in source and bgd. spectrum [Sat May 4 14:44:48 2013] Binned source spectrum to 10 counts/bin [Sat May 4 14:44:48 2013] Setting source spectrum file to fullrun_pn_xmm0084230701_pi300-10000_pass1_cl_src6_src_b10.pi.gz [Sat May 4 14:44:48 2013] Setting bgd. spectrum file to fullrun_pn_xmm0084230701_pi300-10000_pass1_cl_src6_bgd.pi.gz [Sat May 4 16:58:09 2013] Updating aperture counts using extracted products [Sat May 4 16:58:09 2013] Total counts from fullrun_pn_xmm0084230701_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 2787.00 [Sat May 4 16:58:09 2013] Total counts from fullrun_pn_xmm0084230701_pi300-10000_pass1_cl_src6_bgd.pi.gz = 8919.00 [Sat May 4 16:58:09 2013] Got source and background scale factors 1187240.000000, 22810411.000000 [Sat May 4 16:58:09 2013] User source parameters: Position = (304.9, 297.8) = 10 17 0.64 39 4 33.2 Extent = 5.2 (4.9-5.5)", rotation angle = 0 Source aperture counts = 2322.8 +/- 53.8 Background aperture counts = 464.2 Rate = 0.1 +/- 0.002 [Sat May 4 16:58:13 2013] Calculating source flux in energy range 0.30-8.00 [Sat May 4 16:58:13 2013] Using photon index=1.80, rate=0.0509, arf fullrun_pn_xmm0084230701_pi300-10000_pass1_cl_src6.arf [Sat May 4 16:58:13 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat May 4 16:58:13 2013] Updating source flux to 1.6e-13 [Sat May 4 16:58:29 2013] Flag b found in src. 6 procflags, skipping spectral fitting [Sat May 4 16:58:31 2013] xmm0084230701/analysis//spectral/fullrun_pn_xmm0084230701_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete