[Sat May  4 06:28:09 2013] Detection parameters:
  Position = (272.8, 261.9) = 10 17 12.63 39 1 57.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 124.8 +/- 19.2
  Background counts = 77.2
  Rate = 0.007 +/- 0.001

[Sat May  4 06:28:10 2013] Off-axis axis estimate = 3.24'
[Sat May  4 06:30:31 2013] Using EEF radius (= 8.05 ")to estimate initial spatial extent for simple fitting
[Sat May  4 06:30:31 2013] Initial guess for spatial extent in simple fitting = 8.05"
[Sat May  4 06:30:31 2013] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.906
[Sat May  4 06:30:31 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 8.05"
[Sat May  4 07:41:41 2013] fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_src33.ximg exists
[Sat May  4 07:41:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_src33.csv
[Sat May  4 07:41:41 2013] fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_src33_1.ximg exists
[Sat May  4 07:41:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_src33.csv
[Sat May  4 07:41:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 07:41:42 2013] fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Sat May  4 07:41:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_tfrozen_src33.csv
[Sat May  4 07:41:42 2013] fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Sat May  4 07:41:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_tfrozen_src33.csv
[Sat May  4 07:41:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 11:23:29 2013] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 10.876173 pixels away
[Sat May  4 11:23:29 2013] Vigneting correction estimate = 1.000000
[Sat May  4 11:23:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 11:23:29 2013] Assessing source extent using major
[Sat May  4 11:23:29 2013] Source does appear to be extended
[Sat May  4 11:23:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 11:23:30 2013] Source is confused with source 34
[Sat May  4 11:23:58 2013] Using EEF radius (= 8.05 ")to estimate initial spatial extent for simple fitting
[Sat May  4 11:23:58 2013] Initial guess for spatial extent in simple fitting = 8.05"
[Sat May  4 11:23:58 2013] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.906
[Sat May  4 11:23:58 2013] Giving source the simple spatial ID 32 for pass 1, mean size = 8.05"
[Sat May  4 12:23:48 2013] fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_src32.ximg exists
[Sat May  4 12:23:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_src32.csv
[Sat May  4 12:23:48 2013] fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_src32_1.ximg exists
[Sat May  4 12:23:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_src32.csv
[Sat May  4 12:23:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 12:23:48 2013] fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Sat May  4 12:23:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_tfrozen_src32.csv
[Sat May  4 12:23:48 2013] fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Sat May  4 12:23:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_tfrozen_src32.csv
[Sat May  4 12:23:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  4 14:38:22 2013] Spatial fit model total counts = 1267.830000, observed total counts = 1085.000000
[Sat May  4 14:38:22 2013] Poor agreement between spatial fit and data for source 33
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat May  4 14:38:22 2013] Warning: source 32 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 10.767966 pixels away
[Sat May  4 14:38:22 2013] Vigneting correction estimate = 1.000000
[Sat May  4 14:38:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May  4 14:38:22 2013] Assessing source extent using major
[Sat May  4 14:38:22 2013] Source does appear to be extended
[Sat May  4 14:38:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May  4 14:38:45 2013] XMMSAS src. selection expression = ellipse(23687.095520, 22735.209106, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May  4 14:38:45 2013] Writing source region out to fullrun_pn_xmm0084230701_pi300-10000_pass1_cl_src33_src.reg
[Sat May  4 14:38:45 2013] Extracting stamp from image fullrun_pn_xmm0084230701_pi300-10000_cl_sm2.00.img.gz, (235, 224) - (310, 299)
[Sat May  4 14:38:45 2013] XMMSAS bgd. selection expression = annulus(23687.095520, 22735.209106, 1087.500000, 2175.000000, X, Y) && !ellipse(25800.095000, 23841.730600, 1165.000034, 1082.696031, 91.849680, X, Y) && !ellipse(26370.836304, 22734.842712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25693.668427, 22247.817413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23129.178000, 25760.080000, 1180.824034, 1180.824034, 0.000000, X, Y) && !ellipse(23116.696991, 23341.673553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23572.000000, 22239.130157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24745.254791, 21454.486694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25591.948944, 20933.496933, 870.000000, 870.000000, 0.000000, X, Y)
[Sat May  4 14:38:45 2013] Writing fullrun_pn_xmm0084230701_pi300-10000_pass1_cl_src33.gif
[Sat May  4 14:50:19 2013] Mean detx,y = (2435.74, -158.51) 
[Sat May  4 14:50:20 2013] Setting backscal keywords in source and bgd. spectrum
[Sat May  4 14:50:34 2013] Binned source spectrum to 10 counts/bin
[Sat May  4 14:50:34 2013] Setting source spectrum file to fullrun_pn_xmm0084230701_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Sat May  4 14:50:34 2013] Setting bgd. spectrum file to fullrun_pn_xmm0084230701_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Sat May  4 15:16:41 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat May  4 15:16:41 2013] rmf not generated due to insufficient counts
[Sat May  4 16:58:12 2013] Updating aperture counts using extracted products
[Sat May  4 16:58:12 2013] Total counts from fullrun_pn_xmm0084230701_pi300-10000_pass1_cl_src33_src_b10.pi.gz = 1118.00
[Sat May  4 16:58:12 2013] Total counts from fullrun_pn_xmm0084230701_pi300-10000_pass1_cl_src33_bgd.pi.gz = 4040.00
[Sat May  4 16:58:12 2013] Got source and background scale factors 1298188.000000, 5002173.000000
[Sat May  4 16:58:12 2013] User source parameters:
  Position = (272.8, 261.9) = 10 17 12.63 39 1 57.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 69.5 +/- 34.4
  Background aperture counts = 1048.5
  Rate = 0.003 +/- 0.002

[Sat May  4 16:58:12 2013] Updating counts from extracted products
[Sat May  4 16:58:12 2013] Set source signif. to 69.52/32.38 = 2.15
[Sat May  4 16:58:14 2013] Calculating source flux in energy range 0.30-8.00
[Sat May  4 16:58:14 2013] Using photon index=1.80, rate=0.00312, arf fullrun_pn_xmm0084230701_pi300-10000_pass1_cl_src33.arf
[Sat May  4 16:58:14 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May  4 16:58:14 2013] Updating source flux to 8.2e-15
[Sat May  4 16:58:29 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May  4 16:58:31 2013] xmm0084230701/analysis//spectral/fullrun_pn_xmm0084230701_pi300-10000_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete