[Sat May 4 06:28:08 2013] Detection parameters: Position = (310.0, 265.6) = 10 16 58.77 39 2 13.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 899.7 +/- 38.1 Background counts = 67.1 Rate = 0.05 +/- 0.002 [Sat May 4 06:28:10 2013] Off-axis axis estimate = 2.52' [Sat May 4 06:30:31 2013] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting [Sat May 4 06:30:31 2013] Initial guess for spatial extent in simple fitting = 7.69" [Sat May 4 06:30:31 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.972 [Sat May 4 06:30:31 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.69" [Sat May 4 07:41:41 2013] fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_src2.ximg exists [Sat May 4 07:41:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_src2.csv [Sat May 4 07:41:41 2013] fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_src2_1.ximg exists [Sat May 4 07:41:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_src2.csv [Sat May 4 07:41:41 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_src2_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 07:41:42 2013] fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_tfrozen_src2.ximg exists [Sat May 4 07:41:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_tfrozen_src2.csv [Sat May 4 07:41:42 2013] fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists [Sat May 4 07:41:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_tfrozen_src2.csv [Sat May 4 07:41:42 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_tfrozen_src2_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0084230701_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 11:23:29 2013] Source 2 is offset by 6.258387 and -3.707239 pixels which is larger than 2 X fitted extent = 0.836924 x 0.836924, not incorporating fit results [Sat May 4 11:23:29 2013] Warning, spatial fit 2 centroid is now closest to src. 1 [Sat May 4 11:23:29 2013] Vigneting correction estimate = 1.000000 [Sat May 4 11:23:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 4 11:23:29 2013] Assessing source extent using major [Sat May 4 11:23:29 2013] Source does appear to be extended [Sat May 4 11:23:29 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 4 11:23:30 2013] Source is confused with source 3 [Sat May 4 11:23:58 2013] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting [Sat May 4 11:23:58 2013] Initial guess for spatial extent in simple fitting = 7.69" [Sat May 4 11:23:58 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.972 [Sat May 4 11:23:58 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 7.69" [Sat May 4 12:23:47 2013] fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_src2.ximg exists [Sat May 4 12:23:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_src2.csv [Sat May 4 12:23:47 2013] fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_src2_1.ximg exists [Sat May 4 12:23:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_src2.csv [Sat May 4 12:23:47 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_src2_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 12:23:48 2013] fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_tfrozen_src2.ximg exists [Sat May 4 12:23:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_tfrozen_src2.csv [Sat May 4 12:23:48 2013] fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists [Sat May 4 12:23:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_tfrozen_src2.csv [Sat May 4 12:23:48 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_tfrozen_src2_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0084230701_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 4 14:38:22 2013] Source 2 is offset by 7.025099 and -6.002435 pixels which is larger than 2 X fitted extent = 5.500460 x 7.071357, not incorporating fit results [Sat May 4 14:38:22 2013] Vigneting correction estimate = 1.000000 [Sat May 4 14:38:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat May 4 14:38:22 2013] Assessing source extent using major [Sat May 4 14:38:22 2013] Source does appear to be extended [Sat May 4 14:38:22 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat May 4 14:38:45 2013] XMMSAS src. selection expression = ellipse(26917.477631, 23058.472198, 652.500000, 652.500000, 0.000000, X, Y) [Sat May 4 14:38:45 2013] Writing source region out to fullrun_pn_xmm0084230701_pi300-10000_pass1_cl_src2_src.reg [Sat May 4 14:38:45 2013] Extracting stamp from image fullrun_pn_xmm0084230701_pi300-10000_cl_sm2.00.img.gz, (272, 228) - (347, 303) [Sat May 4 14:38:45 2013] XMMSAS bgd. selection expression = annulus(26917.477631, 23058.472198, 1087.500000, 2175.000000, X, Y) && !ellipse(25800.095000, 23841.730600, 1165.000034, 1082.696031, 91.849680, X, Y) && !ellipse(26370.836304, 22734.842712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25693.668427, 22247.817413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28222.243988, 23089.225403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24745.254791, 21454.486694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25591.948944, 20933.496933, 870.000000, 870.000000, 0.000000, X, Y) [Sat May 4 14:38:45 2013] Writing fullrun_pn_xmm0084230701_pi300-10000_pass1_cl_src2.gif [Sat May 4 14:42:15 2013] Mean detx,y = (-411.20, -1479.89) [Sat May 4 14:42:18 2013] Setting backscal keywords in source and bgd. spectrum [Sat May 4 14:42:32 2013] Binned source spectrum to 10 counts/bin [Sat May 4 14:42:33 2013] Setting source spectrum file to fullrun_pn_xmm0084230701_pi300-10000_pass1_cl_src2_src_b10.pi.gz [Sat May 4 14:42:33 2013] Setting bgd. spectrum file to fullrun_pn_xmm0084230701_pi300-10000_pass1_cl_src2_bgd.pi.gz [Sat May 4 14:55:56 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sat May 4 14:55:56 2013] rmf not generated due to insufficient counts [Sat May 4 16:58:09 2013] Updating aperture counts using extracted products [Sat May 4 16:58:09 2013] Total counts from fullrun_pn_xmm0084230701_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 2656.00 [Sat May 4 16:58:09 2013] Total counts from fullrun_pn_xmm0084230701_pi300-10000_pass1_cl_src2_bgd.pi.gz = 4769.00 [Sat May 4 16:58:09 2013] Got source and background scale factors 1092014.000000, 3997549.000000 [Sat May 4 16:58:09 2013] User source parameters: Position = (310.0, 265.6) = 10 16 58.77 39 2 13.8 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 1353.2 +/- 52.5 Background aperture counts = 1302.8 Rate = 0.06 +/- 0.002 [Sat May 4 16:58:09 2013] Updating counts from extracted products [Sat May 4 16:58:09 2013] Set source signif. to 1353.25/36.09 = 37.49 [Sat May 4 16:58:13 2013] Calculating source flux in energy range 0.30-8.00 [Sat May 4 16:58:13 2013] Using photon index=1.80, rate=0.0607, arf fullrun_pn_xmm0084230701_pi300-10000_pass1_cl_src2.arf [Sat May 4 16:58:13 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sat May 4 16:58:13 2013] Updating source flux to 1.8e-13 [Sat May 4 16:58:29 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sat May 4 16:58:31 2013] xmm0084230701/analysis//spectral/fullrun_pn_xmm0084230701_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete